The Effect of Energy-Supply and Performance Indicators on the Performance of Traction-Resource Management Centers

Russian Electrical Engineering - This paper presents the results of a study of the effect of the characteristics of the traction power-supply system on the indicator of the energy supply of...     

Test facility for investigation of heat transfer of promising coolants for the nuclear power industry

The results are presented of experimental investigations into liquid metal heat transfer performed by the joint research group consisting of specialist in heat transfer and hydrodynamics from NIU MPEI and JIHT RAS. The program of experiments has been prepared considering the concept of development of the nuclear power industry in Russia. This concept calls for, in addition to extensive application of water-cooled, water-moderated (VVER-type) power reactors and BN-type sodium cooled fast reactors, development of the new generation of BREST-type reactors, fusion power reactors, and thermonuclear neutron sources. The basic coolants for these nuclear power installations will be heavy liquid metals, such as lead and lithium-lead alloy. The team of specialists from NRU MPEI and JIHT RAS commissioned a new RK-3 mercury MHD-test facility. The major components of this test facility are a unique electrical magnet constructed at Budker Nuclear Physics Institute and a pressurized liquid metal circuit. The test facility is designed for investigating upward and downward liquid metal flows in channels of various cross-sections in a transverse magnetic field. A probe procedure will be used for experimental investigation into heat transfer and hydrodynamics as well as for measuring temperature, velocity, and flow parameter fluctuations. It is generally adopted that liquid metals are the best coolants for the Tokamak reactors. However, alternative coolants should be sought for. As an alternative to liquid metal coolants, molten salts, such as fluorides of lithium and beryllium (so-called FLiBes) or fluorides of alkali metals (so-called FLiNaK) doped with uranium fluoride, can be used. That is why the team of specialists from NRU MPEI and JIHT RAS, in parallel with development of a mercury MHD test facility, is designing a test facility for simulating molten salt heat transfer and hydrodynamics. Since development of this test facility requires numerical predictions and verification of numerical codes, all examined configurations of the MHD flow are also investigated numerically.     

A Gas-Recirculation Control System in a Battery of Fuel Cells

Currently, power plants based on hydrogen—oxygen fuel cells are widely used. The advantages of such electrochemical generators are environmental friendliness, efficiency, and a wide power-output range. Some components of such engines are still being developed. One of these components is the working gasrecirculation system, which increases the efficiency of an installation. In addition, this system helps support the water balance in a fuel-cell stack by removing the water that occurs in the cavities of the membrane—electrode block as a result of the electrochemical reaction. With consideration of the complexity of the reactions that occur in an installation, an automatic control system (ACS) is necessary for the gas recirculation system. This article deals with the organization of an automatic control system based on a microprocessor controller, sensors, and actuators, which implements control algorithms for the components of the gas recirculation system.     

High Temperature Oxidation Behavior of Conventional and Nb-Modified MAR-M246 Ni-Based Superalloy

The present investigations focused on the thermal oxidation of two variants of MAR-M246 alloy having the same contents of Ta and Nb in at. pct, considering the effects of total replacement of Ta by Nb. The alloys were produced by investment casting using high purity elements in induction furnace under vacuum atmosphere. The alloys were oxidized pseudo-isothermally at 800 °C, 900 °C and 1000 °C up to 1000 hours under lab air. Protective oxidation products growing on the surface of the oxidized samples were mainly Al₂O₃, Cr₂O₃. Other less protective oxide such as spinels (NiCr₂O₄ and CoCr₂O₄) and TiO₂ were also detected as oxidation products. The conventional alloy exhibited slight internal oxidation at 800 °C and an enhanced resistance at 900 °C and 1000 °C. The Nb-modified alloy presented an exacerbated internal oxidation and nitridation at 900 °C and 1000 °C and an enhanced resistance at 800 °C. At 1000 °C, Nb-modified alloy was particularly affected by excessive spalling as the main damage mechanisms. From a kinetic point of view, both alloys exhibit the same behavior at 800 °C and 900 °C, with k_p values typical of alumina forming alloys (2 × 10⁻¹⁴ to 3.6 × 10⁻¹³ g² cm⁻⁴ s⁻¹). However, Ta modified alloys exhibited superior oxidation resistance at 1000 °C when compared to the Nb modified alloy due to better adherence of the protective oxide scale.

     

Plastic Deformation Resistance of Steel Grades EP450-Sh and EP823-Sh in Hot and Cold State

Metallurgist - The article presents the results of plastometric studies on hot deformation and studies on the hardening curves in cold deformation of EP450-Sh (12H12M1BFR-Sh) and EP823-Sh...     

Effect of Conditions of High-Temperature Treatment on the Structure and Tribological Properties of Nickel-Based Laser-Clad Coating

Russian Journal of Non-Ferrous Metals - Laser cladding, which is characterized by the minimal thermal impact on the substrate, is an advanced technique to restore the working dimensions of parts...     

Microdistortions,Hardness, and Young’s Modulus of Multicomponent Bcc Solid Solutions

Powder Metallurgy and Metal Ceramics - The phase composition, type II microstresses, and coherent scattering domains (CSDs) of multicomponent (medium- and high-entropy) bcc solid solutions with an...     

The Influence of Hydrogen Concentration in an Ar–H2 Mixture on the Electrical Properties of Solid Oxide Fuel Cells

Powder Metallurgy and Metal Ceramics - Fuel cells are today among the most efficient and environmentally friendly devices for the production of electricity. They are developing rapidly and are...     

Lead and cadmium in teeth,bone and kidneys of rats with a standard Pb‐Cd supply

Male Wistar rats received a combination of 25 ppm PbCl₂ and 5 ppm CdCl₂ in drinking water at different developmental stages. Pb and Cd levels of incisors, molars, epiphyses, diaphyses and kidney cortex were recorded by atomic absorption spectrophotometry. The results confirmed that Pb has an affinity for hard tissue and especially to teeth, but it also accumulated in soft tissues under the above conditions. In addition, the results indicated none or only a moderate placental or mammary barrier for Pb, and suggested a high absorption of lead from the intestine of sucklings. The results also confirmed that kidney cortex is a primary target for Cd, and indicated that Cd has crossed the placental and mammary barriers to some degree. The positive significant correlation between Cd levels in molars and kidney cortex suggested that rodent molars indicate a degree of Cd absorption, whereas incisors do not. It is supposed that rodent molars are comparable to human deciduous teeth. It is thus confirmed that human deciduous teeth indicate previous lead exposure. It is further inferred that they also can be used as indicators of previous Cd‐exposures.     

Removal of Lissamine Red From Wastewater Using Waste Materials

Feasibility of a waste material, flyash, as a material for purification of wastewater containing Lissamine Red has been studied. Effects of time and concentration, temperature and pH on the removal of the dye have been studied. Lower concentrations favour the uptake of dye from water and the maximum removal was observed at a dye concentration of 20 mgL m 1 , 30°C, pH of 7 and adsorbent particle size of 53 µm. Dynamics of the uptake was studied using Lagergren's equation. The mass transfer coefficient was found to be 0.05 cmmin m 1 at a concentration of 20 mgL m 1 , 30°C and 53 µm particle size.