Melting behavior,crystallization kinetics and morphology of random copolyesters of poly(2‐hydroxyethoxybenzoate) with ε‐caprolactone

The melting behavior after isothermal crystallization and the crystallization kinetics of random poly(2‐hydroxyethoxybenzoate/ε‐caprolactone) copolymers rich in 2hydroxyethoxybenzoate units were investigated by means of differential scanning calorimetry and hot‐stage optical microscopy. The observed multiple endotherms, which are commonly displayed by polyesters, were found to be influenced both by crystallization temperature and composition. By applying the Hoffman‐Weeks method to the melting temperatures of isothermally crystallized samples, the equilibrium melting temperatures of the copolymers were obtained. Furthermore, isothemal crystallization kinetics was analyzed according to the Avrami treatment. Values of the exponent n close to 3 were obtained, independently of crystallization temperature and composition, in agreement with a crystallization process originating from predeterminated nuclei and characterized by three‐dimensional spherulitic growth. Space‐filling banded spherulites were observed by hot‐stage optical polarizing microscopy at all the crystallization temperatures explored, the band spacing being affected by both crystallization temperature and composition. As expected, the introduction of ε‐caprolactone comonomeric units in the polymer chain of PHEBA was found to decrease its crystallization rate.     

Détermination des caractéristiques diffusionnelles de transfert d'un solute gazeux adsorbable au sein d'un milieu poreux. Application au cas de la vapeur d'eau au sein du bois de hêtre

An experimental method is proposed to characterize the diffusional transfer of adsorbable gaseous solute medium in a porous medium. Three types of experimental measurements are used to successively access to the solute apparent diffusivity in the gas phase, in the adsorbed phase and to check whether the hypothesis of the thermodynamic equilibrium between the gas phase solute and the adsorbed solute is verified during the transient transfer process. This methodology is applied to a longitudinal section of a beech wood sample for the water transfer in the wood hygroscopic domain.     

Sintering and mechanical properties of tricalcium phosphate–fluorapatite composites

Tricalcium phosphate and synthesized fluorapatite powder were mixed in order to elaborate biphasic ceramics composites. The effect of fluorapatite addition on the densification and the mechanical properties of tricalcium phosphate were measured with the change in composition and microstructure of the bioceramic. The Brazilian test was used to measure the mechanical resistance of the tricalcium phosphate–26.52 wt% fluorapatite composites. The densification and rupture strength increase versus sintering temperature. The composites have a good sinterability and rupture strength in temperature ranging between 1300 and 1400 °C. Thus, the densification ultimate was obtained at 1350 °C and the mechanical resistance optimum reached 9.6 MPa at 1400 °C. Above 1400 °C, the densification and the mechanical properties were hindered by the allotropic transformation of tricalcium phosphate, grain growth and the formation of both intragranular porosity and many cracks. The ³¹P magic angle spinning nuclear magnetic resonance analysis of composites reveals the presence of tetrahedral P sites.     

Effect of Cu/Sn Concentration Ratio on the Phase Equilibrium-Related Properties of Cu-Sn-S Sprayed Materials

Copper tin sulfide Cu-Sn-S compounds have been grown by the spray pyrolysis technique at 360 °C using SnCl₂·2H₂O, CuCl₂ and thiourea (SC(NH₂)₂ as precursors. Structural, morphological, and optical properties were studied showing that the obtained films crystallized in tetragonal and orthorhombic structures in terms of the Cu/Sn concentration ratio in the starting solution. Moreover, the deposited films showed a relatively high optical absorption coefficient of around 10⁴ cm⁻¹ and exhibited indirect transition gaps which lie within 1.17-1.38 eV domain.     

Bio-based sustainable films from the Algerian Opuntia ficus-indica cladodes powder: Effect of plasticizer content

The present study investigated the fabrication and characterization of bio-based sustainable films composed of a terrestrial plant raw material, namely Opuntia ficus-indica (OFI) cladodes powder (CP) and a marine seaweed derivative, namely agar (A). The effect of glycerol concentration on the properties of the casted films was evaluated at four different contents, namely 30, 40, 50 and 60 wt%. The films present UV-blocking properties, as well as moderate mechanical performance, thermal stability, and water vapor transmission rate (WVTR). The results point to an increase in thickness, elongation at break, moisture content, water solubility, and WVTR with increasing glycerol content. On the contrary, Young's modulus, tensile strength, and water contact angle decreased as glycerol concentration increased. The best combination is obtained for the film with 30% glycerol, based on an intermediate compromise between physical, mechanical, thermal, and barrier properties. All these outcomes express the potentiality of the powder obtained from grinding the OFI cladodes as raw material to produce low-cost films for the development of sustainable packaging materials.     

Geometrically induced strain hardening

The concept of geometrically induced strain hardening is presented in order to demonstrate how the strain hardening of materials can be improved by the use of architectured reinforcements with corrugated geometries embedded in a matrix. Theoretical computations are highlighted and examples of real materials obtained by different methods are given of this methodology in order to illustrate the application to the design of structural materials.     

Tumor-Derived Small Extracellular Vesicles Induce Pro-Inflammatory Cytokine Expression and PD-L1 Regulation in M0 Macrophages via IL-6/STAT3 and TLR4 Signaling Pathways

Tumor-associated macrophages play a key role in promoting tumor progression by exerting an immunosuppressive phenotype associated with the expression of programmed cell death ligand 1 (PD-L1). It is well known that tumor-derived small extracellular vesicles (SEVs) affect the tumor microenvironment, influencing TAM behavior. The present study aimed to examine the effect of SEVs derived from colon cancer and multiple myeloma cells on macrophage functions. Non-polarized macrophages (M0) differentiated from THP-1 cells were co-cultured with SEVs derived from a colorectal cancer (CRC) cell line, SW480, and a multiple myeloma (MM) cell line, MM1.S. The expression of PD-L1, interleukin-6 (IL-6), and other inflammatory cytokines as well as of the underlying molecular mechanisms were evaluated. Our results indicate that SEVs can significantly upregulate the expressions of PD-L1 and IL-6 at both the mRNA and protein levels and can activate the STAT3 signaling pathway. Furthermore, we identified the TLR4/NF-kB pathway as a convergent mechanism for SEV-mediated PD-L1 expression. Overall, these preliminary data suggest that SEVs contribute to the formation of an immunosuppressive microenvironment.