Monodisperse‐porous N‐methyl‐D‐glucamine functionalized poly(vinylbenzyl chloride‐co‐divinylbenzene) beads as boron selective sorbent

To generate a new sorbent with high boron adsorption capacity, we synthesized monodisperse‐porous poly(vinylbenzyl chloride‐co‐divinylbenzene), poly(VBC‐co‐DVB), beads 8.5 μm in size by a new “modified seeded polymerization” technique. By using their chloromethyl functionality, the beads were derivatized by a simple, direct reaction with a boron‐selective ligand, N‐methyl‐D ‐glucamine (NMDG). The selection of poly(VBC‐co‐DVB) beads as a starting material allowed to obtain high boron sensitive‐ligand density on the beads depending on their high chloromethyl content. In the batch adsorption runs performed using NMDG‐attached poly(VBC‐co‐DVB) beads as sorbent, boron removal was efficiently performed in a wide pH range between 4 and 11. Quantitative boron removal was observed with the sorbent concentration of 4 g/L. In the same runs, plateau value of equilibrium adsorption isotherm was obtained as 14 mg boron/g beads. Relatively higher boron adsorption was explained by high ligand density and high specific surface area of the sorbent. Boron adsorption isotherms were analyzed using Langmuir and Freundlich models. In the kinetic runs performed for boron removal, the equilibrium was attained within 10 min at a value of 98%. The fast kinetic behavior was explained by the smaller particle size and enhanced porosity of the new sorbent. Infinite solution volume model and unreacted core model were used to evaluate boron adsorption onto the NMDG‐attached poly(VBC‐co‐DVB) beads. The results indicated that the adsorption process is controlled by the particle‐diffusion step. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A hydrophilic matrix for boron isolation: Monodisperse-porous poly(glycidyl methacrylate-co-ethylene dimethacrylate) particles carrying diol functionality

The novel chelating adsorbent has been synthesized by functionalization of monodisperse-porous poly(glycidyl methacrylate-co-ethylene dimethacrylate) particles with N-methylglucamine (NMDG) as a boron selective ligand. The resulting resin can adsorb boron in almost all pH range (pH 4–10) and its maximum capacity is ca. 12 mg/g. The adsorption behavior of poly(GMA-co-EDM)NMDG resin obeyed Langmuir isotherm well.     

Hydrogen-dependent denitrification of water in an anaerobic submerged membrane bioreactor coupled with a novel hydrogen delivery system

Hydrogen-dependent denitrification has gained significant attention due to its potential economic advantage over heterotrophic denitrification. However, effective hydrogen delivery and biomass retention under anaerobic conditions are significant challenges to implementation of this process. An innovative hydrogenotrophic denitrification system, that addresses these challenges, consisting of an anaerobic submerged membrane bioreactor (MBR) and a novel hydrogen delivery unit, was evaluated for removal of nitrate from a synthetic groundwater feed. The hydrogen delivery unit was designed to release hydrogen-supersaturated water to the reactor and was efficient in hydrogen delivery, providing complete mass transfer. The anaerobic submerged MBR was successful in both reducing nitrate from 25 mg NO(3)-Nl(-1) to below detection and separating biomass from treated water to produce effluent free of suspended solids. Nitrogen gas produced during denitrification was internally recycled to effectively achieve membrane scouring and reactor mixing. The total organic carbon was similar to that of the incoming feed water, averaging approximately 6 mgl(-1).     

Removal of cobalt ions from aqueous solutions by using poly(N,N‐dimethylaminopropyl methacrylamide/itaconic acid) hydrogels

In this study, N,N‐dimethylaminopropyl methacrylamide (DMAPMAm) homopolymer and DMAPMAm/itaconic acid (DMAPMAm/IA) copolymers were obtained from ⁶⁰Co‐γ radiation polymerization. Gel fraction and percentage of swelling values were calculated through gravimetrical calculations. In order to increase the swelling of the hydrogel, the amount of IA in initial copolymer composition was gradually increased, but it was observed that gelation values were low. The structural and morphological assessments of homopolymer and copolymers were made by means of several techniques including Fourier Transform Infrared Spectroscopy (FT‐IR), Scanning Electron Microscopy (SEM), and Energy‐Dispersive X‐ray Spectroscopy (EDS). The cobalt ion (Co²⁺) removal capacities of hydrogel were investigated by taking into account of the initial metal ion concentration and pH of aqueous medium. When it came to the maximum capacity of values obtained from adsorption experiments by using Co²⁺ solutions at pH 5, they changed between 220 and 245 mg Co²⁺/g dry hydrogel. FT‐IR, SEM, EDS, and XRD analyses were carried out for enlightening the mechanism of Co²⁺ removal by hydrogels after the completion of adsorption. Also, desorption studies were conducted using ethylenediaminetetraacetic acid (EDTA). Finally, within approximately 5 days, all adsorbed Co²⁺ ions were released from hydrogels at pH 5 using 0.1M EDTA solution. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39569.     

A novel design method for discrete time chaos based true random number generators

Discrete time chaos based true random number generators are lightweight cryptographic primitives that offer scalable performance for the emerging low power mobile applications. In this work, a novel design method for discrete time chaos based true random number generators is developed using skew tent map as a case study. Optimum parameter values yielding maximum randomness are calculated using a mathematical model of true random number generator. A practical information measure is used to determine the maximum allowable parameter variation limits. Appropriate mapping between dynamic system and circuit parameters is established and a current mode skew tent map circuit is designed to validate proposed method.     

Renewable energy market conditions and barriers in Turkey

Decentralized wind, hydropower, biogas and biomass, geothermal, solar thermal and solar electricity energy systems are the most commonly found renewable energy technologies promoted for rural energy supply within sustainable developments programs. They are, therefore, seen to have a central place in the practice of sustainable development and in allowing less development countries to bypass the environmentally damaging fossil fuel intensive paths made by industrialized countries. On the political front, many less development countries are critical of pressure on them to adopt environmental energy technologies.Turkey is situated the meeting point of three continents (Asia, Europe and Africa) and stands as a bridge between Asia and Europe. The country is located in southeastern Europe and southwestern Asia. As Turkey’s economy has expanded in recent years, the consumption of primary energy has increased. Presently in order to increase the energy production from domestic energy resources, decrease the use of fossil fuels as well as reduce of green house gas emissions different renewable energy sources are used for energy production in Turkey. The share of energy production from renewable energy sources has increased during the last 10 years. Turkey must import most of the energy to meet her needs. Turkey also has a large potential for renewable energies. The lack of knowledge about renewable energy technologies by most policy-makers, potential consumers, and energy firm managers has played against renewable energy developments. The paper presents renewable energy used in Turkey and Europe Union and evaluation of the market conditions and barriers of renewable energy use in Turkey.     

Performance comparison of a pilot-scale membrane bioreactor and a full-scale sequencing batch reactor with sand filtration: treatment of low strength wastewater from a northern Canadian Aboriginal Community.

Northern Aboriginal communities in Canada suffer from poor wastewater treatment. Treatment systems on 75% of Manitoban Aboriginal communities produce substandard effluent despite the presence of sophisticated treatment systems. A 200-litre, pilot-scale membrane bioreactor (MBR) was established on the Opaskwayak Cree Nation to investigate the feasibility of MBRs in mitigating Aboriginal wastewater treatment issues. The pilot system was remote controlled and monitored via the Internet using the program pcAnywhere. The community utilized two existing sequencing batch reactors (SBR) and three sand filters for wastewater treatment. The community wastewater was relatively weak and highly fluctuating which led to poorly settling sludge that readily fouled the sand filters. A comparison study between the MBR and SBR was undertaken from September to December 2003. Operated at a 10-hour hydraulic retention time and 20-day solids residence time, the MBR outperformed the SBR and sand filtration on BOD and suspended solids removal. Furthermore, the MBR showed high levels of nitrification despite relatively cold water temperatures.     

The implementation of nonlinear dynamical systems with wavelet network

A dynamic wavelet network circuit implementation for modelling the nonlinear dynamical networks has been proposed in this study. The dynamical wavelet network includes static wavelet network with Mexican hat wavelet function, the voltage-controlled switches and capacitors. The circuit simulations have been done in Spice for the period-1 limit cycle, the spiral and double scroll attractors of the Chua's circuit.     

Effects of ochratoxin A on micronucleus frequenncy in human lymphocytes

Ochratoxin A (OTA( a nephrotoxic and carcinogenic mycotoxin, was investigated to examine its potency to induce micronuclei (MN) in cultured human lymphocytes. Lymphocyte cultures were treated for the last 48 h with OTA at concentrations of 25 μM , 10 μM , 1 μM , 100 nM , 10 nM , 1 nM , and 100 pM and absolute ethanol. At the highest concentration, OTA was found to induce MN in cytokinesis‐blocked lymphocytes (p < 05). The 25 μM OTA concentration also led to a clear decrease in the percentage of binucleated cells, probably due to cytotoxicity. OTA at the other concentrations tested did not induce MN frequency. These results indicate that a high concentration of OTA is genotoxic in cultured human lymphocytes.