Seasonal variations in proximate and elemental composition of pearl oyster (Pinctada radiata,Leach, 1814)

Pearl oysters (Pinctada radiata) were investigated for proximate and elemental composition throughout the year. Oysters were collected bimonthly by hand during scuba diving from the Gulf of Antalya. Ranges of dry matter, protein, fat and ash contents were 144.7–209.8, 65.9–160.4, 4.3–10.9 and 4.6–27.0 g kg^?1, respectively. While the highest protein and fat values were found in the summer months, the highest dry matter and ash contents were found in the winter months. The highest element contents were found in the spring and autumn months. Cadmium and zinc were found to be over the legislative limits, while copper was below, throughout year. The highest concentration among the elements was obtained for zinc. Copyright © 2006 Society of Chemical Industry     

Poly(lactide)/cellulose nanocrystal nanocomposites by high-shear mixing

There is currently considerable interest in developing stiff, strong, tough, and heat resistant poly(lactide) (PLA) based materials with improved melt elasticity in response to the increasing demand for sustainable plastics. However, simultaneous optimization of stiffness, strength, and toughness is a challenge for any material, and commercial PLA is well-known to be inherently brittle and temperature-sensitive and to show poor melt elasticity. In this study, we report that high-shear mixing with cellulose nanocrystals (CNC) leads to significant improvements in the toughness, heat resistance, and melt elasticity of PLA while further enhancing its already outstanding room temperature stiffness and strength. This is evidenced by (i) one-fold increase in the elastic modulus (6.48 GPa), (ii) 43% increase in the tensile strength (87.1 MPa), (iii) one-fold increase in the strain at break (∼6%), (iv) two-fold increase in the impact strength (44.2 kJ/m²), (v) 113-fold increase in the storage modulus at 90°C (787.8 MPa), and (vi) 10³-fold increase in the melt elasticity at 190°C and 1 rad/s (∼10⁵ Pa) via the addition of 30 wt% CNC. It is hence possible to produce industrially viable, stiff, strong, tough, and heat resistant green materials with improved melt elasticity through high-shear mixing.     

An Organoid for Woven Bone

Bone formation (osteogenesis) is a complex process in which cellular differentiation and the generation of a mineralized organic matrix are synchronized to produce a hybrid hierarchical architecture. To study the mechanisms of osteogenesis in health and disease, there is a great need for functional model systems that capture in parallel, both cellular and matrix formation processes. Stem cell-based organoids are promising as functional, self-organizing 3D in vitro models for studying the physiology and pathology of various tissues. However, for human bone, no such functional model system is yet available. This study reports the in vitro differentiation of human bone marrow stromal cells into a functional 3D self-organizing co-culture of osteoblasts and osteocytes, creating an organoid for early stage bone (woven bone) formation. It demonstrates the formation of an organoid where osteocytes are embedded within the collagen matrix that is produced by the osteoblasts and mineralized under biological control. Alike in in vivo osteocytes, the embedded osteocytes show network formation and communication via expression of sclerostin. The current system forms the most complete 3D living in vitro model system to investigate osteogenesis, both in physiological and pathological situations, as well as under the influence of external triggers (mechanical stimulation, drug administration).     

Adsorption of cationic polyacrylamide onto sepiolite

The adsorption of PAM onto sepiolite from aqueous solutions has been investigated systematically as a function of some parameters such as calcination temperature of sepiolite, pH, ionic strength and temperature. The adsorption of cationic polyacrylamide (PAM) increases with pH from 5.50 to 11.00, temperature from 25 to 55 degrees C and ionic strength from 0 to 0.1molL(-1). The sepiolite sample calcined at 200 degrees C has a higher adsorption capacity than the other calcined samples. Adsorption isotherms of PAM onto sepiolite have been determined and correlated with common isotherm equations such as Langmuir and Freundlich isotherm models. The Langmuir isotherm model appeared to fit the isotherm data better than the Freundlich isotherm model. The physical properties of this adsorbent are consistent with the parameters obtained from the isotherm equations. The zeta potentials of sepiolite suspensions have been measured in aqueous solutions of NaCl and different PAM concentrations and pH. From the experimental results: (i) pH strongly alters the zeta potential of sepiolite, (ii) sepiolite has an isoelectric point at about pH 6.6 in water and about pH 8 in 250mgL(-1) PAM concentration, (iii) PAM changes the interface charge from negative to positive for sepiolite. Effect of temperature on adsorption has been quantified by calculating various thermodynamic parameters such as Gibbs free energy, enthalpy and entropy. The dimensionless separation factor (R(L)) has shown that sepiolite can be used for adsorption of PAM from aqueous solutions.     

Preparation and characterization of amidoxime resins based on poly(acrylonitrile-co-vinylidene chloride-co-divinylbenzene)

The poly(acrylonitrile-co-vinylidene chloride-co-divinylbenzene) beads with macroporous morphology were synthesized by suspension polymerization. The use of dichloroethane as a solvating diluent resulted in copolymer beads having highly porous structures. These have been reacted with hydroxylamine in methanol, which generates amidoxime groups. The precursory resins were readily functionalized within 0.5–1 h. A detailed analysis is made of the pore structure of resins in the anhydrous state including pore size distribution and specific surface area. © 1994 John Wiley & Sons, Inc.     

Separation of fluoride from aqueous solution by electrodialysis: effect of process parameters and other ionic species

Removal of fluoride from aqueous solution by electrodialysis was studied. Applied voltage, feed flow rate, fluoride concentration in the solution and effect of the other anions as sulfate, chloride were investigated as experimental parameters on fluoride removal from aqueous solution. The separation performance was evaluated in terms of mass transfer and energy consumption. It was obtained that the separation performance increased when the initial concentration of fluoride in the feed solution increased. Percent removal of fluoride increased as the applied potential increased. However, the effect of feed flow rate was not apparent in the range of applied feed flow rate. Separation of fluoride was influenced by chloride but not by sulfate ions.     

The effect of additives on the oxidation stability of biodiesel

In the present study, it was aimed to examine the degradation of biodiesel and the changes that occur in the cold flow characteristics of biodiesel obtained from safflower oil as a result of the modification of the production process steps that leads to a state in which the process is not realized completely despite the addition of antioxidant additives that stabilize the cold flow characteristics of the fuel and the effects of the modification of the production process steps on fuel characteristics. The study is focused on the modification of the production process. Some samples showed very rapid decomposition in the first 3 hours but the rest took nearly 3 days to reach 200 microsiemens. But then the derivative this value due to the rate of oxidation 0.04 h showed.     

The synthesis of covalent bonded single‐walled carbon nanotube/polyvinylimidazole composites by in situ polymerization and their physical characterization

Single‐walled carbon nanotube (SWCNT) polyvinylimidazole (PVI) composites have been prepared by in situ emulsion polymerization. Dispersion of raw SWCNTs in the PVI matrix was improved by surface modification of the SWCNTs using nitric acid treatment and air oxidation. The carbonyl‐terminated SWCNTs were covalently bonded to PVI by in situ polymerization and the SWCNT/PVI composite was thus obtained. The morphological and structural characterizations of the surface‐functionalized SWCNTs and SWCNT/PVI composites were carried out by Fourier transform infrared spectroscopy, X‐ray diffraction, conductivity measurements, scanning, and transmission electron microscopy. Thermograms of the materials were determined by the differential scanning calorimetry technique. The characterization results indicate that PVI was covalently bonded to SWCNTs and a new material was then obtained. The functionalized SWCNTs showed homogenous dispersion in the composites, whereas purified SWCNT resulted in poor dispersion and nanotube agglomeration. SWCNT/PVI composites exhibited chemical stability enhancement in many common solvents. I–V curves of the samples exhibit an ohmic character. Conductivity values for pure SWCNTs, pure PVI and SWCNT/PVI composite were measured to be 3.47, 2.11 × 10⁻⁹, and 2.3 × 10⁻³ S/m, respectively. Because of resonance, a large dielectric constant is obtained for SWCNT/PVI composite, which is not observed for ordinary materials. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Harmonic waves in a prestressed thin elastic tube filled with a viscous fluid

In this work a theoretical analysis is presented for wave propagation ina thin-walled prestressed elastic tube filled with a viscous fluid. Thefluid is assumed to be incompressible and Newtonian, whereas the tubematerial is considered to be incompressible, isotropic and elastic.Considering the physiological conditions that the arteries experience, sucha tube is initially subjected to a mean pressure P_i and anaxial stretch _z. If it is assumed that in the course ofblood flow small incremental disturbances are superimposed on this initialfield, then the governing equations of this incremental motion are obtainedfor the fluid and the elastic tube. A harmonic-wave type of solution issought for these field equations and the dispersion relation is obtained.Some special cases, as well as the general case, are discussed and thepresent formulation is compared with some previous works on the samesubject.