Rényi information measure for a used item

Recently, in the literature, a measure of tail heaviness has been proposed based on Rényi entropy. This measure is very useful in the sense that it can be used to measure tail heaviness even for the distributions for which the kurtosis measure does not exist. Nadarajah and Zografos [Nadarajah, Zografos, Information Sciences 153 (2003), 119-138] have derived the expression for this measure for different univariate continuous distributions. But, this measure can only be used for the lifetime of a new item. In case of used item, this measure needs some modification. In this paper, we have modified the measure accordingly so that it can be used in the case of used item and also for the new item. We have also derived expressions for this measure for sixteen different univariate distributions and ten other standard distributions derived from the general distributions used in reliability and survival analysis. The most of the results obtained in the literature in this direction can be obtained as particular cases of our general results.     

Nano and micro structural studies of thin films of ZnO

Zinc oxide thin films grown by sol–gel and RF sputtering methods have been characterized. The characterization techniques used involve ellipsometry, optical absorption, scanning tunneling microscopy, scanning and transmission electron microscopy. The films grown by sol–gel spin method which followed zinc acetate route exhibited a smoother texture than the films, which were deposited by using zinc nitrate route. The later type of films showed a dendritic character. Nano-structured fine grains of size ranging from 20 to 60 nm were observed with zinc nitrate precursor film. Individual grains show a sharp contrast with different facets and boundaries. Crystal planes and lattice parameters calculated by electron diffraction and X-ray diffraction are quite close and in agreement with the reported values in literature. Scanning tunneling microscopy has been used for measuring the average roughness of the surface and estimating the lattice constants. The STM studies of RF sputtered films, although showing a ZnO structure, exhibited a disturbed lattice. This was presumably due to the fact that after deposition the films were not annealed. Nanographs of 2D and 3D view of atomic positions of ZnO have been presented by using scanning tunneling microscopy.     

Influence of isovalent ion substitution on the electrochemical performance of LiCoPO4

LiCo_1−xM_xPO₄ (M = Mg²⁺, Mn²⁺ and Ni²⁺; 0 ≤ x ≤ 0.2) compounds have been synthesized by solid-state reaction method and studied as cathode materials for secondary lithium batteries. LiCoPO₄ exhibits a discharge plateau at ∼4.7 V with an initial discharge capacity of 125 mAh/g and on cycling capacity falls. Substitution of Co²⁺ with Mg²⁺/Mn²⁺/Ni²⁺ in LiCoPO₄ has an influence on the initial discharge capacity and on cycling behaviour. The capacity retention of LiCoPO₄ is improved by manganese substitution. Among the manganese substituted phases, LiCo_0.95Mn_0.05PO₄ shows good reversible capacity of ∼50 mAh/g.     

Multiple metastatic infections in a hemodialysis patient with untunneled internal jugular catheter

We present an end‐stage renal disease patient on dialysis with fever. The primary source was right internal jugular vein catheter which had metastatic infections in the body probably via an arteriovenous communication in a cavity in left lung. Patient had right psoas muscle abscess and a left kidney abscess. An ¹⁸F‐fluorodeoxyglucose‐positron emission spectroscopy scan was done to find out left kidney abscess. A search of literature did not reveal many patients of psoas abscess secondary to infection of hemodialysis access.     

Optimisation of immobilisation conditions for chick pea β-galactosidase (CpGAL) to alkylamine glass using response surface methodology and its applications in lactose hydrolysis

Response surface methodology was advantageously used to optimally immobilise a β-galactosidase from chick pea onto alkylamine glass using Box–Behnken experimental design, resulting in an overall 91% immobilisation efficiency. Analysis of variance was performed to determine the adequacy and significance of the quadratic model. Immobilised enzyme showed a shift in the optimum pH; however, optimum temperature remained unaffected. Thermal denaturation kinetics demonstrated significant improvement in thermal stability of the enzyme after immobilisation. Galactose competitively inhibits the enzyme in both soluble and immobilised conditions. Lactose in milk whey was hydrolysed at comparatively higher rate than that of milk. Immobilised enzyme showed excellent reusability with retention of more than 82% enzymatic activity after 15 uses. The immobilised enzyme was found to be fairly stable in both dry and wet conditions for three months with retention of more than 80% residual activity.     

Novel organic–inorganic hybrid coatings prepared by the sol–gel process: corrosion and mechanical properties

(Hyperbranched polyurethane‐urea)/[(3‐aminopropyl)triethoxysilane]‐ZnO (HBPUU‐APTES‐ZnO) hybrid coatings were synthesized using an inexpensive mixing technique by varying the APTES‐modified ZnO concentration. The mechanical and surface properties of the hybrid coating films were studied and compared with unmodified and modified ZnO. The corrosion, solvent and abrasion resistance show significant enhancement in HBPUU‐APTES‐ZnO hybrids and their properties are increased with increasing APTES‐ZnO concentration. This hybrid coating has opened up an opportunity for automotive topcoat application. Copyright © 2012 Society of Chemical Industry     

Hardystonite improves biocompatibility and strength of electrospun polycaprolactone nanofibers over hydroxyapatite: A comparative study

The aim of this study was to compare physico-chemical and biological properties of hydroxyapatite (HA) and hardystonite (HS) based composite scaffolds. Hardystonite (Ca₂ZnSi₂O₇) powders were synthesized by a sol–gel method while polycaprolactone–hardystonite (PCL–HS) and polycaprolactone–hydroxyapatite (PCL–HA) were fabricated in nanofibrous form by electrospinning. The physico-chemical and biological properties such as tensile strength, cell proliferation, cell infiltration and alkaline phosphatase activity were determined on both kinds of scaffolds. We found that PCL–HS scaffolds had better mechanical strength compared to PCL–HA scaffolds. Addition of HA and HS particles to PCL did not show any inhibitory effect on blood biocompatibility of scaffolds when assessed by hemolysis assay. The in vitro cellular behavior was evaluated by growing murine adipose-tissue-derived stem cells (mE-ASCs) over the scaffolds. Enhanced cell proliferation and improved cellular infiltrations on PCL–HS scaffolds were observed when compared to HA containing scaffolds. PCL–HS scaffolds exhibited a significant increase in alkaline phosphatase (ALP) activity and better mineralization of the matrix in comparison to PCL–HA scaffolds. These results clearly demonstrate the stimulatory role of Zn and Si present in HS based composite scaffolds, suggesting their potential application for bone tissue engineering.     

Molecular Dynamics Study of Gas–Surface Interactions in a Force-Driven Flow of Argon through a Rectangular Nanochannel

In recent times, flows through micro- and nanochannels have gained prominence due to their applicability to the fast growing fields of micro- and nanotechnology among others. Understanding gas–surface interactions in such flows is crucial, because the size of the micro/nanoscale devices is typically comparable to boundary layer thickness near a wall and the surface starts playing a significant role. An attempt is made to understand these interactions by modeling simple force-driven argon gas flow between two parallel platinum plates by the molecular dynamics method. One of the most important parameters that describes gas–surface interactions—that is, the tangential momentum accommodation coefficient, along with flow properties such as velocity and density—is calculated for a range of Knudsen numbers in the early transitional flow regime. A deeper insight into the flow physics is obtained by considering various case studies for the variation of aforesaid properties with respect to external driving forces and gas–wall interaction strengths.     

Investigation of the effect of ZnO nanoparticles on the thermomechanical and microbial properties of hyperbranched polyurethane‐urea hybrid composites

Hybrid coatings of hyperbranched polyurethane‐urea (HBPUU) containing ZnO nanoparticles were prepared by mixing the hyperbranched polyurethane with the nanoparticles. The films were stored at room temperature and laboratory humidity conditions for one week to yield completely cured hybrid films. The ZnO nanoparticles were found to be well dispersed in the polymer up to 3 wt%. The structure–property relationship of various HBPUU–ZnO hybrid coatings was analysed using a Fourier transform infrared peak deconvolution technique with a Gaussian curve‐fitting procedure, while their viscoelastic, thermomechanical and surface morphology were studied using X‐ray diffraction, dynamic mechanical thermal analysis, thermogravimetric analysis, a universal testing machine, scanning electron microscopy, atomic force microscopy and contact angle instruments. The thermal stability and mechanical properties of the hybrid composite films improved with increasing ZnO content, which was believed to be due to thermal insulation in the presence of nanoparticles. Water contact angle data suggested that the hydrophobic character of the hybrid composites increased with increasing nanoparticle concentration. The antimicrobial property of the HBPUU–ZnO hybrid coatings was studied using the disc diffusion method. HBPUU–ZnO hybrid coatings showed good antimicrobial properties compared to HBPUU. Copyright © 2012 Society of Chemical Industry     

Slip in flows of power-law liquids past smooth spherical particles

The effect of slip in flows of power-law liquids past smooth spherical particles is numerically studied by using Navier’s linear slip model. For computational simplicity, a sphere-in-sphere type computational domain has been chosen. Thus, the governing conservation equations of mass and momentum are considered in spherical coordinates. These are solved by using a finite difference method-based simplified marker and cell algorithm implemented on a staggered grid arrangement. The non-Newtonian terms of the momentum equation are discretized by a second-order central differencing scheme, whereas the convective terms are discretized by using QUICK scheme. The reliability and accuracy of the solver is established by comparing the present numerical results with the existing literature counterparts. Furthermore, extensive new results are obtained in the range of conditions for Reynolds number, Re: 0.1–200; power-law behavior index, n: 0.5–1.6; and a dimensionless slip parameter, λ: 0.01–100. Finally, effects of these dimensionless parameters on near surface flow kinematics are thoroughly delineated.