Peripheral neuroblastoma in a young Beagle dog

Disseminated Mycobacterium avium complex (MAC) infections are common in patients with acquired immunodeficiency syndrome (AIDS). These patients frequently seek care with fever accompanied by generalized systemic symptoms and undergo bone marrow biopsy. It is our practice to stain all bone marrow trephine biopsy specimens from patients infected with HIV for acid-fast bacilli (AFB). We evaluated this practice by comparing the sensitivity and turnaround time for detection of MAC by biopsy specimen staining, bone marrow aspirate culture, and blood culture. Bone marrow trephine biopsy specimens with corresponding bone marrow aspirate and blood cultures from 86 HIV-positive patients were reviewed. Of the 86 patients, 30 had positive results for disseminated MAC infection, and all 30 of those patients had positive blood cultures. Bone marrow aspirate cultures identified 17 MAC-positive cases, and AFB staining of the biopsy specimen identified 9. The mean times to detection of MAC positivity were 1.1 days for AFB staining of the biopsy specimen, 19 days for bone marrow aspirate culture, and 16 days for blood culture. While AFB staining of biopsy specimens was the least sensitive of the detection methods, it was useful for the rapid diagnosis of disseminated MAC infection, allowing for prompt initiation of antimycobacterial therapy in one third of patients.     

Rapid separation of shikimic acid from Chinese star anise (Illicium verum Hook. f.) with hot water extraction

Shikimic acid can be rapidly separated (ca. 5 min) from Chinese star anise with hot water extraction at temperatures of 120 °C or higher to obtain recoveries of 100%. Extraction recoveries of shikimic acid close to 97% can be obtained with water at 70 °C using slightly longer extraction times (ca. 10 min) than those at 120 °C. A semi-batch flow apparatus was used to study the effect of temperature, average particle size, water flow rate, and extraction time on the experimental recoveries. For 0.5 g Chinese star anise raw material that contained ca. 8% shikimic acid, 100% recoveries of shikimic acid could be obtained with 60 g water at 150 °C at 15 MPa in 4 min for star anise material having a particle size range from 355 to 600 μm. A one-site kinetic model was found to provide good correlation of the data and the kinetic parameters of the model could be written in terms of linearized contributions in temperature, average particle diameter and flow rate.     

The puzzling afterglow of GRB 050721: a rebrightening seen in the optical but not in the X-ray

We present here the analysis of the early and late multiwavelength afterglow emission, as observed by Swift a small robotic telescope and very large telescope (VLT). We compare early observations with late afterglow observations obtained with Swift and the VLT and we observe an intense rebrightening in the optical band at about 1 day after the burst, which is not present in the X-ray band. The lack of detection in X-ray of such a strong rebrightening at lower energies may be described with a variable external density profile. In such a scenario, the combined X-ray and optical observations allow us to derive that the matter density located at approximately 1017 cm from the burst is approximately a factor of 10 higher than in the inner region. This is the first time in which a rebrightening has been observed in the optical afterglow of a gamma-ray burst that is clearly absent in the X-ray afterglow.     

Fabrication and properties of one-mask-patterned ferroelectric integrated capacitors

A one-mask-patterned ferroelectric capacitor test structure designed with a 0.5-μm feature size was fabricated. Oxygen plasma treatment after dry etching decreased the leakage current to as low as that of as-deposited film. These one-mask-patterned ferroelectric capacitors, with switching charge almost equal to as-deposited film, were successfully fabricated. Ferroelectric memories as dense as dynamic random access memories will become possible with this technology. However, the leakage current density for micron-sized capacitors is 2 to 10 times that of large capacitors. The leakage current in small capacitors is increased due to perimeter leakage that runs through the damaged region on the capacitor sidewall. © Scripta Technica, Inc. Electr Eng Jpn, 121(1): 43–50, 1997     

MiR-7-5p Is Involved in Ferroptosis Signaling and Radioresistance Thru the Generation of ROS in Radioresistant HeLa and SAS Cell Lines

In cancer therapy, radioresistance or chemoresistance cells are major problems. We established clinically relevant radioresistant (CRR) cells that can survive over 30 days after 2 Gy/day X-ray exposures. These cells also show resistance to anticancer agents and hydrogen peroxide (H₂O₂). We have previously demonstrated that all the CRR cells examined had up-regulated miR-7-5p and after miR-7-5p knockdown, they lost radioresistance. However, the mechanism of losing radioresistance remains to be elucidated. Therefore, we investigated the role of miR-7-5p in radioresistance by knockdown of miR-7-5p using CRR cells. As a result, knockdown of miR-7-5p increased reactive oxygen species (ROS), mitochondrial membrane potential, and intracellular Fe²⁺ amount. Furthermore, miR-7-5p knockdown results in the down-regulation of the iron storage gene expression such as ferritin, up-regulation of the ferroptosis marker ALOX12 gene expression, and increases of Liperfluo amount. H₂O₂ treatment after ALOX12 overexpression led to the enhancement of intracellular H₂O₂ amount and lipid peroxidation. By contrast, miR-7-5p knockdown seemed not to be involved in COX-2 and glycolysis signaling but affected the morphology of CRR cells. These results indicate that miR-7-5p control radioresistance via ROS generation that leads to ferroptosis.     

NUMERICAL STUDY ON TURBULENT FLOW AND HEAT TRANSFER IN CIRCULAR COUETTE FLOWS

Abstract

A numerical study is performed to investigate heat transfer and fluid flow in the entrance and fully developed regions of an annulus, consisting of a rotating, insulated inner cylinder and a stationary, heated outer cylinder. Several different k-ε turbulence models are employed to determine the turbulent kinetic energy, its dissipation rate, and the heat transfer performance. The governing boundary layer equations are discretized by means of a control volume finite difference technique and numerically solved using the marching procedure. In the entrance region the axial rotation of the inner cylinder induces a thermal development and causes an increase in both the Nusselt number and the turbulent kinetic energy in the inner cylinder wall region. In the fully developed region, an increase in the Taylor number causes an amplification of the turbulent kinetic energy over the whole cross section, resulting in a substantial enhancement in the Nusselt number. These transport phenomena are also affected by the radius ratio and Reynolds number.     

The Uncertainty in SCHF‐DT Thermal Conductivity Measurements of Lotus‐Type Porous Copper

Lotus‐type porous metals with many straight pores are attractive for use as heat‐sinks because a large heat‐transfer capacity can be obtained, due to the small diameter of the pores. In order to use lotus‐type porous copper effectively as a heat sink, it is important to know the effective thermal conductivity considering the effect of pores on heat conduction in the material. Since these metals have anisotropic pores, a steady‐state comparative longitudinal heat‐flow method for measuring thermal conductivity, referring to an ASTM standard, is better than other methods. So far, the effective thermal conductivity of lotus‐type porous copper has been measured by using specimens of different thickness (the SCHF‐DT method). In this paper, the uncertainty in the effective thermal conductivity of a specimen measured using this method was evaluated by comparison between numerical analysis and current experimental data. The following conclusions were drawn: 1) The uncertainty showed good agreement with the uncertainty analysis; 2) The contribution of the thermal grease thickness was large, based on a combined standard uncertainty analysis; and, 3) The effective thermal conductivity perpendicular to the pores of lotus copper can be measured within 10% uncertainty by this method.     

Large Magnetovolume Effect Induced by Embedding Ferromagnetic Clusters into Antiferromagnetic Matrix of Cobaltite Perovskite

Materials that show negative thermal expansion (NTE) have significant industrial merit because they can be used to fabricate composites whose dimensions remain invariant upon heating. In some materials, NTE is concomitant with the spontaneous magnetization due to the magnetovolume effect (MVE). Here the authors report a new class of MVE material; namely, a layered perovskite PrBaCo₂O_5.5+x (0 ≤ x ≤ 0.41), in which strong NTE [β ≈ ?3.6 × 10^?5 K^?1 (90–110 K) at x = 0.24] is triggered by embedding ferromagnetic (F) clusters into the antiferromagnetic (AF) matrix. The strongest MVE is found near the boundary between F and AF phases in the phase diagram, indicating the essential role of competition between the F‐clusters and the AF‐matrix. Furthermore, the MVE is not limited to the PrBaCo₂O_5.5+x but is also observed in the NdBaCo₂O_5.5+x . The present study provides a new approach to obtaining MVE and offers a path to the design of NTE materials.     

A Knowledge-Based Software Process Simulation Model

In this paper we propose a new software development process simulation model. The model can predict variations of productivity based on dynamic changes in the developer's knowledge structure. An important concept of the model is that a developer's productivity is influenced by the developer's knowledge. Moreover, a developer can acquire new knowledge by executing activities of a project. In other words, the developer's knowledge structure changes during the project. The knowledge structure is defined using a cognitive map that consists of knowledge elements and prerequisite relationships among the knowledge elements. By adding the specific developer's knowledge and the specific project workload to the knowledge structure, an increment of the developer's knowledge and the project progress are calculated into the model. The simulation results are useful for making project plans including technical reviews, which are an efficient technique for acquiring new knowledge. The simulation model can predict what knowledge should be discussed in the technical review, when the review should be held, and who the members of the review should be. The simulation results help managers make the most appropriate and executable project plan.