Photoluminescence of Rare-Earth-Doped Ca-α-SiAlON Phosphors: Composition and Concentration Dependence

Rare-earth-doped Ca-α-SiAlON phosphors, with the compositions of (Ca_{1−3/2 x} RE _x ) _{m /2}Si_{12− m − n} Al _m+n O _n N_{16− n} (RE=Ce, Sm, and Dy, 0.5≤ m =2 n ≤3.0), were prepared by sintering at 1700°C for 2 h under 10 atm N₂. The concentration of rare earths varied from 3 to 30 at.% with respect to Ca. The photoluminescence (PL) properties were investigated as functions of the composition of the host matrix (i.e., m ) and the concentration of rare earths (i.e., x ). The results show that the emission properties can be optimized by tailoring m and x . The Ce³⁺ luminescence originating from the 4 f –5 d interconfigurational transitions is greatly affected by the environment surrounding the Ce³⁺ ions, which differs from the Sm³⁺ or Dy³⁺ luminescence arising from the 4 f –4 f intraconfigurational transitions. X-ray diffraction and scanning electron microscopy were used to explain the composition and concentration dependence of PL properties.     

Resistance to sulfur poisoning of hot gas cleaning catalysts for the removal of tar from the pyrolysis of cedar wood

In the partial oxidation of tar derived from the pyrolysis of cedar wood, the effect of H₂S addition was investigated over non-catalyst, steam reforming Ni catalyst, and Rh/CeO₂/SiO₂ using a fluidized bed reactor. In the non-catalytic gasification, the product distribution was not influenced by the presence of H₂S. Steam reforming Ni catalyst was effective for the tar removal without H₂S addition, however, the addition of H₂S deactivated drastically. In contrast, Rh/CeO₂/SiO₂ exhibited higher and more stable activity than the Ni catalyst even under the presence of high concentration of H₂S (280 ppm). On the Ni catalyst, the adsorption of sulfur was observed by XPS and Ni species was oxidized during the partial oxidation of tar. In the case of Rh/CeO₂/SiO₂, the adsorption of sulfur was below the detection limit of XPS. This can be related to the self-cleaning of catalyst surface during the circulation in the fluidized bed reactor for the partial oxidation of tar derived from cedar pyrolysis.     

Preparation and properties of biodegradable network poly(ester-carbonate) elastomers

Biodegradable elastomeric network poly(ester-carbonate)s were prepared from multifunctional aliphatic carboxylic acids such as tricarballylic acid (Y_t) or trimesic acid (Y) and polycarbonate diols (PCD) with molecular weights of 1000 and 2000 g/mol. Prepolymers prepared by a melt polycondensation were cast from dimethylformamide solution and postpolymerized at 270 °C for 40-80 min to form a network. The resultant films were transparent, flexible and insoluble in organic solvents. WAXS exhibited the crystalline peaks due to polycarbonate segments for the network films from PCD₂₀₀₀, while those from PCD₁₀₀₀ were amorphous. The tensile properties were determined for these network films at the temperatures 22, 30, 40 and 50 °C. These films showed elastomeric properties at all temperatures measured. The elongation at break was much higher for the films from PCD₂₀₀₀ (208-434%) than those from PCD₁₀₀₀ (40-120%), and decreased with increasing temperatures. The weight losses of the network films degraded in the buffer solution of Rhizopus delemar lipase at 37 °C increased with time, suggesting that these network films are biodegradable. The degradation rate of the network films from Y_t is faster than that from Y. The GPC curves showed that the lipase hydrolyzed both the ester linkages between Y or Y_t and PCD as well as polycarbonate moiety in the network polymer.     

Effect of Lipase Activity and Specificity on the DAG Content of Olive Oil from the Shodoshima-Produced Olive Fruits

Olive oils have a higher relative diacylglycerol (DAG) content than other plant oils. The lipase in olive fruits is involved in DAG production and is directly related to the acidity of the olive oil. However, the lipase activity and positional selectivity have not been clarified. To investigate the properties of olive fruit lipase, olive fruits of the Mission variety harvested during mid-December of 2005 on Shodoshima Island (Japan) were stored at 20, 30 or 40 °C for 4 weeks. Changes in the acidity and acylglycerol content of the oils extracted from the stored fruits were analyzed. The acidity and DAG content of the olive oils increased due to triacylglycerol (TAG) hydrolysis during storage. sn-1,2-DAGs preferentially increased during the early stages of storage, indicating that the olive fruit lipase is enantioselective for the sn-3 position, while non-enzymatic isomerization of sn-1,2-DAGs was observed throughout the entire duration of storage. Kinetic analysis revealed that the enantioselectivity of olive fruit lipase for the sn-3 position was approximately four times greater than for the sn-1 position. The lipase was gradually inactivated at temperatures of 30 °C or higher, and the ratios of the rate constant for inactivation to TAG hydrolysis at the sn-3 position was 0.2, 13, and 23 at 20, 30, and 40 °C, respectively.     

Polyethylene–Carbon Nanotube Composite Film Deposited by Cold Spray Technique

Carbon nanotubes (CNTs) are high-performance materials because of their superior electrical conductivity, thermal conductivity, and self-lubrication, and they have been studied for application to polymer composite materials as fillers. However, the methods of fabricating polymer composites with CNTs, such as injection molding, are too complicated for industrial applications. We propose a simple cold spray (CS) technique to obtain a polymer composite of polyethylene (PE) and CNTs. The composite films were deposited by CS on polypropylene and nano-porous structured aluminum substrates. The maximum thickness of the composite film was approximately 1 mm. Peaks at G and D bands were observed in the Raman spectra of the films. Scanning electron microscopy images of the film surface revealed that PE particles were melted by the acceleration gas and CNTs were attached with melted PE. The PE particles solidified after contact with the substrate. These results indicate that PE–CNT composite films were successfully deposited on polypropylene and nano-porous structured aluminum substrates by CS.     

Ferroelectric properties of ultrathin films of Nylon 11

Ferroelectric properties of ultrathin films of Nylon 11 were investigated. The thickness was in the range of 25 to 55 nm. Ferroelectric response was largely affected by thermal annealing and following cooling conditions. Thermal annealing at higher temperature followed by quenching in liquid nitrogen gave larger remanent polarization and smoother surface, whereas cooling down in an ambient atmosphere caused smaller remanent polarization and rough surface. Surface roughness strongly affected the polarization reversal and remanent polarization. Hydrogen bonding in crystal was also significantly related to the polarization reversal and thus remanent polarization.     

Biocompatibility of a-C:H film coating for synthetic vascular graft

Amorphous hydrogenated carbon (a-C:H) films have many excellent properties such as biocompatibility, anti-corrosion, and chemical stability. Therefore, there are many reports on application of a-C:H film as surface modification technique for biomaterials. However, it is difficult to deposit a-C:H film on complex structures such as artificial heart blood pump and synthetic vascular grafts. In our previous work, we have developed an electrode which is adapted to such irregular structures for plasma CVD technique.In this study, a-C:H film was deposited on a synthetic vascular graft inner-wall by r.f. plasma CVD technique with cylindrical electrode. The purpose of such coating is improvement of biocompatibility of the vascular graft. The biocompatibility of the a-C:H film was evaluated by cytocompatibility and plasma protein adhesion. For the a-C:H film deposition, cytocompatibility and protein adsorbent of the vascular grafts were improved for biological response under cell culture with mouth fibroblasts and plasma proteins (albumin, fibrinogen, and globulin), respectively. This study indicates that the a-C:H films coatings is expected to surface modification for medical appliances.     

Force sensorless robust tracking servo system suppressing periodic disturbance and sudden disturbance for optical disk system

This paper proposes a new force sensorless robust tracking servo system, which detects and suppresses both the periodic disturbance and the sudden disturbance without force sensor. The proposed system estimates both the periodic disturbance and the sudden disturbance and the sudden disturbance by using a new sudden disturbance observer and the memory of tracking error. In the proposed system, the influence of sudden disturbance is suppressed by the proposed sudden disturbance observer. On the other hand, the influence of periodic disturbance is suppressed by means of ZPET feed‐forward servo system. The experimental results point out that the proposed tracking servo system has a precise tracking response against both the periodic disturbance and the sudden disturbance. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(1): 82–90, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20614