An Improvement of the Portmanteau Statistic

Abstract. The portmanteau statistic is based on the first m‐residual autocorrelations, and is used for diagnostic checks on the adequacy of fit of a model. In this article, we propose a modified portmanteau statistic with a correction term that allows for the use of small values of m for the chi‐squared test. For this modification, we take a different approach to that suggested by Ljung [Biometrika (1986), Vol. 73, pp. 725–30]. Their empirical behaviour is clarified using asymptotic theory.     

Preparation of Aluminum Oxynitride by Nitridation of a Precursor Derived from Aluminum–Glycine Gel and the Effects of the Presence of Europium

Spinel-type AlON, Al_2.75□_0.25O_3.74N_0.26, was obtained by ammonia nitridation of an oxide precursor prepared by peptizing a glycine gel with aluminum nitrate. To achieve crystallization, the nitrided product had to be annealed at 1500°C for 10 min in flowing nitrogen. The use of glycine instead of citric acid was important for obtaining a white product without residual carbon. A similar preparation method was used for adding small amounts of europium below 10 mol%. A strong blue emission was observed for products ranging from 0.5 to 3.0 mol% Eu doping. The product with 0.5 mol% doping had a maximum emission intensity at 400 nm for an excitation of 254 nm. The products with 1 and 3 mol% doping showed double maxima at 475 and 520 nm. These three emissions were due to the presence of divalent europium in the EuAl₁₂O₁₉ magnetoplumbite-like aluminum oxynitride impurity mixed with the AlON spinel major phase. The 1 mol% Eu-doped product exhibited expanded hexagonal lattice parameters ( a =0.5591 and c =2.236 nm) compared with the values for EuAl₁₂O₁₉ magnetoplumbite itself, observed in the 7.7 mol%-doped product without any strong emission. The above spectrum change was discussed in relation to the coordination around Eu²⁺.     

Construction of hydrogen fermentation from garbage slurry using the membrane free bioelectrochemical system

The aim of this study was to show the effectiveness of the membrane free bioelectrochemical system (BES) using three electrodes on inhibition of methanogenesis and construction of hydrogen fermentation from the artificial garbage slurry. The electrical redox-potential on the working electrode was adjusted to -1.0V (vs. Ag/AgCl) that has positive effect on methanogenesis. The redox-potential on the counter electrode was measured to be 1.6V. The pH in the effluents was 5.5-6.4. Hydrogen production rate at the cathode side was similar to that at the anode side and much higher than that calculated from current, and reached a maximum of 2445±815 (average±standard deviation) mL?L(-1)?d(-1) at an organic loading rate of 58.7g dichromate chemical oxygen demand per L d(-1). Methane production was negligible throughout the experiment. Acetate and butyrate were the main products of the fermentation using a BES; these offered favorable conditions for hydrogen production. The bacterial community in the bioelectrochemical hydrogen fermentor differed from that in the methanogenic seed sludge and included hitherto unknown species. These results show that high redox-potential on the anodic electrode and acidic pH in the membrane free BES can be utilized for hydrogen fermentation from the artificial garbage slurry by avoiding methanogenesis.     

Acceleration of cellulose degradation and shift of product via methanogenic co-culture of a cellulolytic bacterium with a hydrogenotrophic methanogen

Although the effects of syntrophic relationships between bacteria and methanogens have been reported in some environments, those on cellulose decomposition using cellulolytic bacteria from methanogenic reactors have not yet been examined. The effects of syntrophic co-culture on the decomposition of a cellulosic material were investigated in a co-culture of Clostridium clariflavum strain CL-1 and the hydrogenotrophic methanogen Methanothermobacter thermautotrophicus strain ΔH and a single-culture of strain CL-1 under thermophilic conditions. In this study, strain CL-1 was newly isolated as a cellulolytic bacterium from a thermophilic methanogenic reactor used for degrading garbage slurry. The degradation efficiency and cell density of strain CL-1 were 2.9- and 2.7-fold higher in the co-culture than in the single-culture after 60?h of incubation, respectively. Acetate, lactate and ethanol were the primary products in both cultures, and the concentration of propionate was low. The content of acetate to total organic acids plus ethanol was 59.3% in the co-culture. However, the ratio decreased to 24.9% in the single-culture, although acetate was the primary product. Therefore, hydrogen scavenging by the hydrogenotrophic methanogen strain ΔH could shift the metabolic pathway to the acetate production pathway in the co-culture. Increases in the cell density and the consequent acceleration of cellulose degradation in the co-culture would be caused by increases in adenosine 5'-triphosphate (ATP) levels, as the acetate production pathway includes ATP generation. Syntrophic cellulose decomposition by the cellulolytic bacteria and hydrogenotrophic methanogens would be the dominant reaction in the thermophilic methanogenic reactor degrading cellulosic materials.     

Characterization of electrical properties and photosensitivity of SnS thin films prepared by the electrochemical deposition method

Using the electrochemical deposition (ECD) method, we prepared tin sulfide thin films, which are suitable for the absorption layer in solar cells because of its bandgap energy (1 eV). We first optimized pulse-form biasing for ECD by characterizing deposited samples with scanning electron microscope, Auger electron spectroscopy and X-ray diffraction measurements. Then, we investigated the electrical properties of deposited SnS thin films and the properties of contacts with several different metals. Furthermore, we observed the photoconductivity of the films by means of photoelectrochemical measurements. From these results, we confirmed that the SnS thin films show p-type conduction.     

Analysis of enoyl-coenzyme A hydratase activity and its stereospecificity using high-performance liquid chromatography equipped with chiral separation column

Enoyl-coenzyme A (CoA) hydratase catalyzes the hydration of trans-2-enoyl-CoA to yield 3-hydroxyacyl-CoA during fatty acid degradation (β-oxidation). Although much research has focused on the stereospecificities of 2-enoyl-CoA hydratases, a direct quantification of the production of 3(R)- and 3(S)-hydroxyacyl-CoA has not yet been established. Therefore, we developed a method of concurrently quantifying 3(R)- and 3(S)-hydroxyacyl-CoA using high-performance liquid chromatography (HPLC) equipped with a chiral separation column. The optimized conditions for the separation of 3(R)-, 3(S)-hydroxyhexadecanoyl-CoA and trans-2-hexadecenoyl-CoA, were determined to be as follows: mobile phase of 35/65 (v/v) of 50 mM phosphate buffer (pH 5.0)/methanol; flow rate of 0.5 mL/min; detection at 260 nm; and column temperature of 25°C. This method was applied to subcellular fractions of rat liver; the results directly confirmed that 3(S)-hydroxyhexadecanoyl-CoA is the dominant product obtained from the heat-stable enoyl-CoA hydratase-catalyzed reaction of trans-2-hexadecenoyl-CoA. Finally, the stereospecificities of L-bifunctional protein (L-BP) and D-bifunctional protein (D-BP) were reinvestigated using this method, and it was confirmed that L- and D-BP yielded 3(S)- and 3(R)-hydroxyhexadecanoyl-CoA were yielded from trans-2-hexadecenoyl-CoA, respectively. 3(R)-Hydroxyacyl-CoA is a peroxisomal β-oxidation-specific intermediate. Therefore, this method is potentially useful not only studies regarding the stereochemistry of enoyl-CoA hydratase but also for the diagnosis of diseases caused by defects of peroxisomal enoyl-CoA hydratase.     

New conceptual three-phase current-fed soft switching pulse width modulation converter with switched capacitor type resonant dc link

This paper presents a novel prototype of three-phase current-fed PWM converter with a switched capacitor type resonant dc link snubber circuit, which can basically operate under a principle of zero current soft switching commutation. The optimum PWM pattern-based control scheme proposed by the authors is effectively applied for this active converter. In this paper, the steady-state operating principle of a new converter circuit treated here is described. The practical design procedure of this converter is discussed from a theoretical point of view. The feasible experiment to confirm zero current soft switching commutation of this converter is concretely implemented and evaluated herein.     

Adhesion Properties of Nanometer-Thick Perfluoropolyether Films Confined Between Solid Surfaces: A Coarse-Grained Molecular Dynamics Study

Lubrication with thin liquid films is essential to ensure the tribological reliability of technologically advanced devices, such as micro-electro-mechanical systems and hard disk drives. However, the adhesion and friction properties of thin films and the underlying mechanism remain elusive due to our limited understanding of film structures and motions at the molecular scale. Here, we investigate the adhesion behavior of nanometer-thick perfluoropolyether (PFPE) films confined between two solid surfaces as a function of film thickness using coarse-grained molecular dynamics simulations. Consistent with typical experimental results, our simulations show that the adhesive force exerted by the PFPE films reaches a maximum and then decreases with increasing solid–solid spacing. The maximum adhesive force increases sharply for PFPE films thinner than 4 nm. When exhibiting the maximum adhesive force, PFPE films are slightly stretched within a solid–solid spacing a little larger than the initial film thickness and thereby show lower density than the original equilibrium density. Conventional theories of adhesion, which assume equilibrium density for liquid films, are not applicable in such case. Therefore, we construct a theoretical model that takes decreasing liquid density into account to discuss the underlying mechanism of the adhesive force exerted by nanometer-thick PFPE films on solid surfaces. We infer from the theoretical analyses that the maximum adhesive force originates mainly from solid–liquid interaction for thin films and liquid–liquid interaction for thick films.     

40 Gbit/s packet bit error ratio and loss real-time measurement for ultrahigh-speed packet switched network

A novel packet bit error rate (BER) and loss measurement method and system is proposed. A proposed 40 Gbit/s packet BER and loss measurement system is expressed in detail. A 40 Gbit/s BER and loss measurement with various conditions is demonstrated experimentally. In real time, only the payload part of a packet and burst stream with fluctuated guard time is evaluated. The BER and packet loss of a randomly received packet sequence due to routing and buffering can be also evaluated by the measurement system. A 10 Gbit/s packet BER and loss measurement with optical label switching, buffering, and preamble-free optical packet 3R are demonstrated experimentally.     

Sulfated Hyaluronan Binds to Heparanase and Blocks Its Enzymatic and Cellular Actions in Carcinoma Cells

We examined whether sulfated hyaluronan exerts inhibitory effects on enzymatic and biological actions of heparanase, a sole endo-beta-glucuronidase implicated in cancer malignancy and inflammation. Degradation of heparan sulfate by human and mouse heparanase was inhibited by sulfated hyaluronan. In particular, high-sulfated hyaluronan modified with approximately 2.5 sulfate groups per disaccharide unit effectively inhibited the enzymatic activity at a lower concentration than heparin. Human and mouse heparanase bound to immobilized sulfated hyaluronan. Invasion of heparanase-positive colon-26 cells and 4T1 cells under 3D culture conditions was significantly suppressed in the presence of high-sulfated hyaluronan. Heparanase-induced release of CCL2 from colon-26 cells was suppressed in the presence of sulfated hyaluronan via blocking of cell surface binding and subsequent intracellular NF-κB-dependent signaling. The inhibitory effect of sulfated hyaluronan is likely due to competitive binding to the heparanase molecule, which antagonizes the heparanase-substrate interaction. Fragment molecular orbital calculation revealed a strong binding of sulfated hyaluronan tetrasaccharide to the heparanase molecule based on electrostatic interactions, particularly characterized by interactions of (−1)- and (−2)-positioned sulfated sugar residues with basic amino acid residues composing the heparin-binding domain-1 of heparanase. These results propose a relevance for sulfated hyaluronan in the blocking of heparanase-mediated enzymatic and cellular actions.