Design challenges of a 65 nm CMOS stacked folded differential PA structure for mobile communications

In this paper, a novel phase-locked loop (PLL) architecture with multiple charge pumps, which is used to design a fast-locking PLL and a low-phase-noise PLL, is proposed. The effective capacitance and resistance of the loop filter in terms of voltage is scaled up/down according to the locking status by controlling the magnitude and direction of the charge pump current. Two PLLs, one with a fast-locking characteristic and the other with a low-phase-noise characteristic, are designed and fabricated in a 0.35-μm CMOS process based on the proposed architecture. The fast-locking PLL has a locking time of less than 6 μs and a phase noise of −90.45 dBc/Hz at 1 MHz offset. The low-phase-noise PLL has a locking time of 25 μs, a phase noise of −105.37 dBc/Hz at 1 MHz offset, and a reference spur of −50 dBc. Both PLLs have an 851.2 MHz output frequency.     

Topical Capsaicin in Poly(lactic-co-glycolic)acid (PLGA) Nanoparticles Decreases Acute Itch and Heat Pain

Background: Capsaicin, the hot pepper agent, produces burning followed by desensitization. To treat localized itch or pain with minimal burning, low capsaicin concentrations can be repeatedly applied. We hypothesized that alternatively controlled release of capsaicin from poly(lactic-co-glycolic acid) (PLGA) nanoparticles desensitizes superficially terminating nociceptors, reducing burning. Methods: Capsaicin-loaded PLGA nanoparticles were prepared (single-emulsion solvent evaporation) and characterized (size, morphology, capsaicin loading, encapsulation efficiency, in vitro release profile). Capsaicin-PLGA nanoparticles were applied to murine skin and evaluated in healthy human participants (n = 21) for 4 days under blinded conditions, and itch and nociceptive sensations evoked by mechanical, heat stimuli and pruritogens cowhage, β-alanine, BAM8-22 and histamine were evaluated. Results: Nanoparticles (loading: 58 µg capsaicin/mg) released in vitro 23% capsaicin within the first hour and had complete release at 72 h. In mice, 24 h post-application Capsaicin-PLGA nanoparticles penetrated the dermis and led to decreased nociceptive behavioral responses to heat and mechanical stimulation (desensitization). Application in humans produced a weak to moderate burning, dissipating after 3 h. A loss of heat pain up to 2 weeks was observed. After capsaicin nanoparticles, itch and nociceptive sensations were reduced in response to pruritogens cowhage, β-alanine or BAM8-22, but were normal to histamine. Conclusions: Capsaicin nanoparticles could be useful in reducing pain and itch associated with pruritic diseases that are histamine-independent.     

Mechanical and barrier properties of cardboard and 3D packaging coated with microfibrillated cellulose

Microfibrillated cellulose (MFC) is increasingly used with cellulosic substrates and especially with paper materials. Its use with cardboard remains not reported and the study of mechanical and barrier properties of MFC‐coated cardboard has been investigated in this article. The influence of coating process as well as the effect of MFC have been highlighted by comparing different MFC‐coated cardboard samples with PE‐coated cardboard samples. MFC was coated using bar coating process. Their distribution and homogeneity onto cardboard was observed using techniques such as SEM and FE‐SEM. Tests such as oxygen and air permeability, bending stiffness, and compressive strength have been carried out. The coating process used impacts significantly cardboard properties by two opposite ways: on one hand it damages the structure cohesion of cardboard decreasing its compressive strength; on the other hand it increases its bending stiffness by increasing considerably the samples thickness. The addition of MFC counterbalances the negative effects of the coating process: bending stiffness and compressive strength are indeed improved by 30% in machine direction. On the contrary, MFC does not enhance much cardboard barrier properties, although it considerably increases their water absorption. Within a framework of packaging application, MFC will rather have consequent effects on cardboard's properties as blend or as part of the multilayer structure. Other applications have to be considered for its use as top layer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40106.     

Processing of CaLa2S4 infrared transparent ceramics: A comparative study of HP and FAST/SPS techniques

The densification of CaLa₂S₄ (CLS) powders prepared by combustion method was investigated by the use of Field-Assisted Sintering Technique (FAST) and Hot Pressing (HP). CLS powders were sintered using FAST at 1000°C at different pressures and heating rates and sintered by HP under 120 MPa from 800°C to 1100°C for 6 hours with a heating rate of 10°C/min. Comparison of both techniques was further realized by use of the same conditions of pressure, dwell time, and heating rate. Complementary techniques (XRD, SEM-EDS, density measurements, FTIR spectroscopy) were employed to correlate the sintering processes/parameters to the microstructural/compositional developments and optical transmission of the ceramics. Both sintering techniques produce ceramics with submicrometer grain size and relative density of about 99%. Nevertheless, HP is more suitable to densify CLS ceramics without fragmentation and also reach higher transmission than FAST. Transmission of 40%–45% was measured out of a possible maximum of 69% based on the Fresnel losses in the 8-14 μm window when HP is applied at 1000°C for 6 hours under 120 MPa. In both techniques, ceramics undergo reduction issues that originate from graphitic sintering atmosphere.     

Individual cell lag time distributions of Cronobacter (Enterobacter sakazakii) and impact of pooling samples on its detection in powdered infant formula

Cells of six strains of Cronobacter were subjected to dry stress and stored for 2.5 months at ambient temperature. The individual cell lag time distributions of recovered cells were characterized at 25 °C and 37 °C in non-selective broth. The individual cell lag times were deduced from the times taken by cultures from individual cells to reach an optical density threshold. In parallel, growth curves for each strain at high contamination levels were determined in the same growth conditions. In general, the extreme value type II distribution with a shape parameter fixed to 5 (EVIIb) was the most effective at describing the 12 observed distributions of individual cell lag times. Recently, a model for characterizing individual cell lag time distribution from population growth parameters was developed for other food-borne pathogenic bacteria such as Listeria monocytogenes. We confirmed this model’s applicability to Cronobacter by comparing the mean and the standard deviation of individual cell lag times to populational lag times observed with high initial concentration experiments. We also validated the model in realistic conditions by studying growth in powdered infant formula decimally diluted in Buffered Peptone Water, which represents the first enrichment step of the standard detection method for Cronobacter. Individual lag times and the pooling of samples significantly affect detection performances.     

In vitro comparisons between Carica papaya and pancreatic lipases during test meal lipolysis: Potential use of CPL in enzyme replacement therapy

High levels of lipase activity are known to occur in Carica papaya latex, and this activity is being used in some biotechnological applications. The lipolytic activity of C. papaya lipase (CPL) on dietary triacylglycerols (TAG) has not yet been studied. Hence, the aim of this study was to characterise the specific activity of CPL on dietary TAG present in a crude preparation. Also, we have determined its stability during the lipolysis of a test meal at various pH values mimicking those occurring in the gastro-intestinal tract, with or without bile, and have compared these properties with those of porcine pancreatic extract (PPE) and human pancreatic lipase (HPL). CPL showed maximum stability at pH 6.0, both with and without bile. Some residual activity was still observed at pH 2 (20%), whereas the pancreatic lipases tested were immediately completely inactivated at this pH. In the absence of bile, the highest specific activities were measured at pH 6 in the case of CPL, PPE and HPL. Adding bile slightly decreased the CPL activity in the 4–6 pH range, thus shifting the optimum CPL activity to pH 7, where the presence of bile had no effect. Lipolysis levels decreased with the pH, but CPL was still more active than PPE at pH 5 on a relative basis. These results suggest that CPL might be a promising candidate for use as a therapeutic tool on patients with pancreatic exocrine insufficiency.     

Radical‐scavenging properties of extracts from the white button mushroom,Agaricus bisporus

BACKGROUND: Agaricus bisporus is the premier cultivated edible mushroom but is usually considered to be of lesser value nutritionally and medicinally compared with other cultivated mushrooms. The objective of this study was to investigate the radical‐scavenging properties of methanolic extracts and the free radical‐processing enzyme activities of water extracts from A. bisporus fruit bodies. Analyses were performed on total fruit bodies from three strains and on separated stipe, cap and gills from one strain, all cultivated experimentally under the same conditions. RESULTS: EC₅₀ values of scavenging ability on 1,1‐diphenyl‐2‐picrylhydrazyl radicals (DPPH^?), scavenging ability on 2,2‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonic acid) radical cations (ABTS^?+) and reducing power of methanolic extracts from total fruit bodies ranged between 1.7 and 5.0 and were 1.1–1.9 times higher in a white hybrid than in two wild strains, cream and brown. The gills exhibited higher antioxidant activities relative to the stipe and cap. In water extracts, glutathione peroxidase activities were up to eight times higher than glutathione reductase activities and no difference was observed between strains. Catalase activity was highest in the brown wild strain. The only significant differences in free radical‐processing enzymes between the three parts of the mushroom were higher catalase activity in the gills and lower glutathione reductase activity in the stipe. CONCLUSION: The radical‐scavenging properties of the button mushroom are comparable to those of other edible mushrooms and dependent on the strain and on the section of the fruit body. Copyright © 2008 Society of Chemical Industry     

Disrupting the methionine biosynthetic pathway in Candida guilliermondii: characterization of the MET2 gene as counter‐selectable marker

Candida guilliermondii (teleomorph Meyerozyma guilliermondii) is an ascomycetous species belonging to the fungal CTG clade. This yeast remains actively studied as a result of its moderate clinical importance and most of all for its potential uses in biotechnology. The aim of the present study was to establish a convenient transformation system for C. guilliermondii by developing both a methionine auxotroph recipient strain and a functional MET gene as selection marker. We first disrupted the MET2 and MET15 genes encoding homoserine‐O‐acetyltransferase and O‐acetylserine O‐acetylhomoserine sulphydrylase, respectively. The met2 mutant was shown to be a methionine auxotroph in contrast to met15 which was not. Interestingly, met2 and met15 mutants formed brown colonies when cultured on lead‐containing medium, contrary to the wild‐type strain, which develop as white colonies on this medium. The MET2 wild‐type allele was successfully used to transfer a yellow fluorescent protein (YFP) gene‐expressing vector into the met2 recipient strain. In addition, we showed that the loss of the MET2‐containing YFP‐expressing plasmid can be easily observed on lead‐containing medium. The MET2 wild‐type allele, flanked by two short repeated sequences, was then used to disrupt the LYS2 gene (encoding the α‐aminoadipate reductase) in the C. guilliermondii met2 recipient strain. The resulting lys2 mutants displayed, as expected, auxotrophy for lysine. Unfortunately, all our attempts to pop‐out the MET2 marker (following the recombination of the bordering repeat sequences) from a target lys2 locus were unsuccessful using white/brown colony colour screening. Nevertheless, this MET2 transformation/disruption system represents a new versatile genetic tool for C. guilliermondii. Copyright © 2014 John Wiley & Sons, Ltd.