Error evaluation on experimental stress–strain curve obtained from tube bulging test

To get precise material data for advanced numerical modelling of tube hydroforming process, the tube bulging test is recommended. Stresses and strains in the tube cannot be evaluated easily and several approaches have been proposed. A review is proposed and points out their advantages and drawbacks.     

In-Situ Analyzing the Influence of Thermoelectromagnetic Convection on the Nucleation Ahead of the Advancing Interface During Directional Solidification

Sn-3wt%Pb alloy was directionally solidified without and with a 0.08T transverse magnetic field(TMF),and real-time recorded by in-situ synchrotron X-ray imaging.Results indicate that TMF shortened the distance from the location of nucleation to the advancing interface,and accelerated the growth rate of the equiaxed crystal,which caused the columnar-to-equiaxed transition(CET)finally.The thermoelectromagnetic convection(TEMC)in front of the interface and around the crystal’s dendritic branch should respond to changes of the distance and the growth rate.     

Nanometric Scale Investigation of Phase Transformations in Advanced Steels for Automotive Application

The current trend toward producing lighter vehicles in the automotive industry is driven by the need to conform to the new exhaust emission control regulations. This objective presents a challenge to steel manufacturers. The difficulty lies in designing new alloys with an optimum strength/formability/cost balance for the various components. Here, the key to success lies in controlling the steel microstructure and especially the phase transformations at the smallest possible scale. Among the different alloying elements, light elements such as carbon and boron are of prime importance due to their major effects on the kinetics of phase transformations. Characterization tools combining high spatial and analytical resolution such as secondary ion mass spectrometry (SIMS) and field emission gun-transmission electron microscopy (TEM) were used. In this article, the examples presented are as follows. (1) Boron segregation and precipitation effects to control hardenability in martensitic steels. (2) Local carbon distribution in advanced high-strength steels, with a specific emphasis on martensite tempering. Links have been established between the boron and carbon distribution and the formability.     

A linear 60 GHz 65 nm-CMOS power amplifier realization and characterization for OFDM signal

A millimeter-wave Power Amplifier (PA) based on a 65nm CMOS technology from STMicroelectronics has been designed. The targeted feature is the unlicensed band around 60 GHz suitable for wireless personal area network application (WPAN). To optimize the linearity, the PA is designed under class A biasing to have an output compression point (OCP₁) close to its saturated Power (P _sat). S-parameters and large signal measurement results are demonstrated and compared with electromagnetic simulations. The PA offers a P _sat of 8.3 dBm, an OCP₁ of 6 dBm and a gain of 6.7 dB. The die area is 0.29 mm² with pads. Considering those results, one-tone simulations are not sufficient to characterize the linearity performances of the PA in its real conditions of use. Consequently, two-tone simulations are firstly performed. After, linearity figures of merit (FoM) are discussed applying an orthogonal frequency-division multiplexing (OFDM) modulated signal. The PA offers an adjacent channel power ratio (ACPR) of 15 dB and an error vector magnitude (EVM) of 20% at PA compression operating mode.     

A comparison of MOSFETs aging under d.c., a.c. and alternating stress conditions

The effects of static, alternating and dynamic stress conditions on the degradation rate of 0.8μm n- and p-channel LDD MOS transistors have systematically been investigated and compared. The shifts of the threshold voltage, transconductance, linear drain current and charge pumping current were used to monitor the transistor degradation. The results suggest that the aging induced by a dynamic stress cannot be directly explained with static stress models, essentially because it is highly dependent on a larger number of parameters (biases and durations of the top and bottom levels of the pulses, transient times). The correlation of static and dynamic stresses also clarifies the degradation mechanisms, in particular the role of hot holes in the generation of interface states.     

A multiparameter wearable physiologic monitoring system for space and terrestrial applications.

A novel, unobtrusive and wearable, multiparameter ambulatory physiologic monitoring system for space and terrestrial applications, termed LifeGuard, is presented. The core element is a wearable monitor, the crew physiologic observation device (CPOD), that provides the capability to continuously record two standard electrocardiogram leads, respiration rate via impedance plethysmography, heart rate, hemoglobin oxygen saturation, ambient or body temperature, three axes of acceleration, and blood pressure. These parameters can be digitally recorded with high fidelity over a 9-h period with precise time stamps and user-defined event markers. Data can be continuously streamed to a base station using a built-in Bluetooth RF link or stored in 32 MB of on-board flash memory and downloaded to a personal computer using a serial port. The device is powered by two AAA batteries. The design, laboratory, and field testing of the wearable monitors are described.     

FeO0.7F1.3/C Nanocomposite as a High‐Capacity Cathode Material for Sodium‐Ion Batteries

Searching high capacity cathode materials is one of the most important fields of the research and development of sodium‐ion batteries (SIBs). Here, we report a FeO_0.7F_1.3/C nanocomposite synthesized via a solution process as a new cathode material for SIBs. This material exhibits a high initial discharge capacity of 496 mAh g^?1 in a sodium cell at 50 °C. From the 3^rd to 50^th cycle, the capacity fading is only 0.14% per cycle (from 388 mAh g^?1 at 3^rd the cycle to 360 mAh g^?1 at the 50^th cycle), demonstrating superior cyclability. A high energy density of 650 Wh kg^?1 is obtained at the material level. The reaction mechanism studies of FeO_0.7F_1.3/C with sodium show a hybridized mechanism of both intercalation and conversion reaction.     

Millimeter wave band ultra wideband transmitter MMIC

This paper presents a new millimeter-wave (MMW) ultra wideband (UWB) transmitter MMIC which has been developed in an OMMIC 0.1 μm GaAs PHEMT foundry process (f_t = 100 GHz) for 22-29 GHz vehicular radar systems. The transmitter is composed of an MMW negative resistance oscillator (NRO), a power amplifier (PA), and two UWB pulse generators (PGs). In order to convert the UWB pulse signal to MMW frequency and reduce the total power consumption, the MMW NRO is driven by one of the UWB pulse generators and the power amplifier is triggered by another UWB pulse generator. The main advantages of this transmitter are: new design, simple architecture, high-precision distance measurements, infinite ON/OFF switch ratio, and low power consumption. The total power consumption of the transmitter MMIC is 218 mW with a peak output power of 5.5 dBm at 27 GHz.