A multi-echelon production–inventory system with supply disruption

The article investigates an integrated multi-layer supply chain model consisting of supplier, manufacturer and retailer while supply disruption, machine breakdown, safety stock, maintenance breakdown occur simultaneously. At beginning of the production, manufacturer keeps some raw materials in stock received from second supplier at high price, as safety stock due to supply disruption of first supplier. Corrective maintenance is done immediately to restore its normal stage when machine breakdown occurs. Stock out situations at manufacturer and retailer are considered due to disruption of production for machine breakdown. The integrated expected costs of the chain in centralized (collaborating) and decentralized (Stakelberg approach) system are compared. A numerical example and its sensitivity analysis are provided to test feasibility of the model.     

Three stage trade credit policy in a three-layer supply chain–a production-inventory model

The main purpose of this paper is to investigate the optimal replenishment lot size of supplier and optimal production rate of manufacturer under three levels of trade credit policy for supplier–manufacturer–retailer supply chain. The supplier provides a fixed credit period to settle the accounts to the manufacturer, while the manufacturer gives a fixed credit period to settle the account to the retailer and the retailer, in turn, also offers a credit period to each of its customers to settle the accounts. We assume that the supplier supplies the raw material to the manufacturer and sends back the defective raw materials to the outside supplier after completion of inspection at one lot with a sales price. The system always produces good items in the model. Also, we consider the idle times of supplier and manufacturer. Finally, numerical examples are provided to illustrate the behaviour and application of the model with graphical simulation.     

Rheology of oil in water emulsions with added solids

The effect of added solids on the rheology of oil in water emulsions was investigated. The range of the oil concentration, solids free basis, was (0-70%) and the solids volume fraction was (0-0.16). The solids mean diameter was 45 μm and it was about four times larger than the oil droplets. In the absence of added solids, non-Newtonian behaviour was observed for oil concentrations above 40%. The added solids increased the emulsion viscosity in a manner similar to the addition of solids to a homogeneous fluid. The rheological data of all the emulsion-solids mixtures investigated were correlated as relative viscosity versus solids volume fraction, where the relative viscosity is defined as the ratio of the emulsion-solids mixture viscosity to the solids-free emulsion viscosity. In the case of non-Newtonian systems, the emulsion-solids mixture viscosity and the solids-free emulsion viscosity were calculated at the same shear stress. The Barnea and Mizrahi viscosity correlation was found to fit the data well.     

Dual segment rectangular dielectric resonator antenna with metamaterial for improvement of bandwidth and gain

The simulation and experimental studies of an aperture‐coupled wideband dual segment rectangular dielectric resonator antenna with metamaterial for C‐band applications are presented in this paper. The antenna consists of Alumina (Al₂O₃) ceramic as upper segment and Teflon as lower segment. The combination of circular‐shaped coplanar split‐ring resonator and conducting strip has been used as metamaterial superstrate. With the use of metamaterial superstrate, the bandwidth of the antenna is increased by 48% through simulation and 22% experimentally. The broadside radiation pattern of the antenna is converted into directive radiation pattern with reduced beamwidth when metamaterial superstrate is used. The peak gain of the antenna is also enhanced by 33% through simulation and 31% experimentally with the use of metamaterial superstrate. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:646–655, 2014.     

Separation of mixtures and distribution of a liquid on a structured packing in a large-scale model of a distillation column

A large-scale experimental setup is designed to study the hydrodynamic parameters and the mass-transfer efficiency in a countercurrent flow of mixtures of Freon R21 and Freon R114 on structured packings in a column 0.9 m in diameter. The study deals with the local and integral parameters of separation of the mixture, the degrees of nonuniformity of the flow rates and concentration distributions of the liquid and vapor phases over a cross section and on the column wall, and the pressure difference while varying the number of packing layers and their rotation angle. The mass-transfer processes while independently varying the liquid and vapor flow rates over wide ranges are also investigated. Experimental data are presented to illustrate the effect of the operating parameters on the height of an equivalent theoretical plate, the relative pressure difference, and the distributions of the local parameters of the flows.     

Mechanical,electrical, and thermal expansion properties of carbon nanotube-based silver and silver-palladium alloy composites

The mechanical, electrical, and thermal expansion properties of carbon nanotube（CNT）-based silver and silver–palladium（10：1, w/w） alloy nanocomposites are reported. To tailor the properties of silver, CNTs were incorporated into a silver matrix by a modified molecular level-mixing process. CNTs interact weakly with silver because of their non-reactive nature and lack of mutual solubility. Therefore, palladium was utilized as an alloying element to improve interfacial adhesion. Comparative microstructural characterizations and property evaluations of the nanocomposites were performed. The structural characterizations revealed that decorated type-CNTs were dispersed, embedded, and anchored into the silver matrix. The experimental results indicated that the modification of the silver and silver–palladium nanocomposite with CNT resulted in increases in the hardness and Young＇s modulus along with concomitant decreases in the electrical conductivity and the coefficient of thermal expansion（CTE）. The hardness and Young＇s modulus of the nanocomposites were increased by 30%？40% whereas the CTE was decreased to 50%-60% of the CTE of silver. The significantly improved CTE and the mechanical properties of the CNT-reinforced silver and silver–palladium nanocomposites are correlated with the intriguing properties of CNTs and with good interfacial adhesion between the CNTs and silver as a result of the fabrication process and the contact action of palladium as an alloying element.     

One pot synthesis of nano Ag in calcium alginate beads and its catalytic application in p‐Nitrophenol reduction with kinetic parameter estimation and model fitting

In this work, one step process of synthesis of silver nanoparticles (Agnp) embedded in insitu formed calcium alginate (CA) beads is stated. CA, formed from the reaction between sodium alginate and calcium hydroxide, acts as reducing and stabilizing agent as well as support for nanoparticles. The reaction mechanism for the formation and stabilization of Agnp is proposed where the vicinal dihydroxy groups of alginate are assumed to act as the reducing agent for Ag⁺ to Ag°. Transmission electron microscopy (TEM), x‐ray diffraction (XRD), UV‐vis spectroscopy, field emission scanning electron microscopy (FESEM), and atomic absorption spectroscopy (AAS) were used to characterize the Agnp. The formation of spherical nanoparticles with average size range of 4‐5 nm was confirmed by TEM. Catalytic activity of this nano silver‐calcium alginate (Agnp‐CA) composite was evaluated in the reduction of p‐nitrophenol. Concentrations of sodium alginate, calcium hydroxide, and AgNO₃ are found to be the parameters that critically affect the synthesis of Agnp. The efficacy of the catalyst is expressed on the basis of suitable reaction parameters. Both pseudo‐homogeneous and heterogeneous kinetic models are proposed for the reaction to find the best model and the Eley‐Riedel model is found to fit well with the experimental data. The novelty of this work is that the tandem process of CA bead formation, Agnp formation, and Agnp entrapment in CA have been transformed into a single‐step process. Moreover, elaborations of each step of the ionic mechanisms of Agnp formation and p‐NP reduction with Agnp and the establishment of a heterogeneous kinetic model for the reaction are reported for the first time here.     

Two‐echelon manufacturer–retailer supply chain strategies with price,quality, and promotional effort sensitive demand

This study deals with the two‐layer supply chain model of one manufacturer and one retailer for a single commodity where market demand is assumed to be dependent on selling price, quality of the products, and promotional effort of the retailer. We investigate the behavior of the supply chain under centralized, manufacturer Stackelberg, conditional manufacturer Stackelberg, retailer Stackelberg, conditional retailer Stackelberg, and vertical Nash model structure. The nature of the above models provides great insights to a firm's manager for achieving optimal strategy in a competitive marketing system. Quite often, not all items produced in a firm are of perfect quality; some are perfect (conforming) quality and others are imperfect (nonconforming) quality. The nonconforming products are sold in a secondary shop or by other retailers. The procurement cost of finished products depends on the quality of the products due to more investment in advanced technology, better raw materials, and skilled labor, etc. The warranty policy for the products is also imposed to attract the customers to buy more. Here, both members (manufacturer and retailer) jointly share the cost of the warranty policy. The objective of this paper is to determine the optimal selling price and promotional effort of the retailer, while the optimal wholesale price and quality of the products are determined by the manufacturer so that the above strategies are maximized. Finally, numerical examples with sensitivity analysis of the key parameters are illustrated to investigate the proposed model.     

Femtocell based green power consumption methods for mobile network

This paper presents the analytical models of power consumption in macrocell, microcell, picocell and femtocell based networks. Five case studies are presented in this paper where macrocells, microcells, picocells and femtocells are deployed based on the number of mobile subscribers present in a region, mobile user traffic in that region and the area of the region where cellular coverage has to be provided. A comparative study is performed between the power consumption by the base stations in each of these five cases and that of the only macrocell based network. The simulation results demonstrate that using each of these five strategies the power consumption by the base stations can be minimized than that of only macrocell based network. Based on the power consumption by the base stations in these five schemes, we have categorized the networks into five classes, A, B, C, D and E, each of which contains cells of different types to reduce power consumption to achieve green cellular network.     

Multi-objective optimization in wire-electro-discharge machining of TiC reinforced composite through Neuro-Genetic technique

This paper proposed a Neuro-Genetic technique to optimize the multi-response of wire electro-discharge machining (WEDM) process. The technique was developed through hybridization of a radial basis function network (RBFN) and non-dominated sorting genetic algorithm (NSGA-II). The machining was done on 5 vol% titanium carbide (TiC) reinforced austenitic manganese steel metal matrix composite (MMC). The proposed Neuro-Genetic technique was found to be potential in finding several optimal input machining conditions which can satisfy wide requirements of a process engineer and help in efficient utilization of WEDM in industry.