Organochlorine Formation in Tertiary Amine Catalyzed Pulp Bleaching

An oxygen delignified eucalyptus kraft pulp was bleached by applying a catalytic amount of a tertiary amine, 1,4-diazabicyclo[2,2,2]octane, and hypochlorous acid at varying pH, temperature, and time. The bleaching filtrate was analyzed for chloroform and AOX and the pulp for residual lignin, hexenuronic acid, and OX. In comparison with chlorine dioxide bleaching, the novel catalytic bleaching (pH < 6) generated only traces of chloroform and low contents of AOX and OX. Separate catalytic oxidations of authentic hexenuronic acid showed that it was a major precursor of chloroform. The results demonstrate a practical way to reduce organochlorine formation in pulp bleaching and provide new understanding on the reaction pathways that yield chloroform.     

Molecular and thermal studies of carbon fiber precursor polymers with low thermal‐oxidative stabilization characteristics

In this investigation, terpolymers, copolymers, and homopolymer of acrylonitrile with dimethylaminopropyl acrylamide (DMAPA), itaconic acid (IA) viz., poly(acrylonitrile‐ran‐3‐dimethylaminopropyl acrylamide‐ran‐itaconic acid) [P(AN‐DMAPP‐IA)], poly(acrylonitrile‐co‐3, dimethylaminopropyl acrylamide) [P(AN‐DMAPP)] were synthesized with varying amounts of comonomers using solution polymerization process. The chemical structure, composition, bonding network were determined employing infrared, 1H and, 13‐carbon nuclear magnetic resonance spectroscopic techniques. Molecular characteristics of as‐synthesized polymers such as different kinds of average molecular weights, molecular weight distribution were estimated applying solution viscometry and size exclusion chromatography. The influence of comonomers (DMPAA, IA) on the thermal stabilization characteristics of acrylonitrile terpolymers in comparison with copolymers and homopolymers of acrylonitrile were studied using differential scanning calorimetry (DSC), hyphenated thermal techniques (thermal gravimetry coupled with differential thermal analyzer).The DSC curves of P(AN‐DMAPP‐IA) exhibit a distinct broader bimodal peaks with thermal exotherm initiating at as low as 165 °C, and followed by two peaks with temperature difference of 42 °C, releasing the evolved heat at a release rate of 0.7–0.11 J g^?1s^?1over 10 min as compared to 1.2, 7.5 J g^?1s^?1 in 4.5, 2 min as observed in P(AN‐DMAPP), polyacrylonitrile, respectively. The thermal stability of P(AN‐DMAPP‐IA) and P(AN‐DMAPP), as evidenced by TGA‐DTA was found to be higher than PAN homopolymers. Specific heat capacity measurements confirmed the DSC results. Bulk densities of P(AN‐DMAPP‐IA) were in the range 0.31–0.35 g/cc. These results confirm the low‐temperature stabilization characteristics and suitability of P(AN‐DMAPP‐IA) as low cost carbon fiber precursor polymers. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46381.     

Optical and structural properties of highly porous shell structured Fe doped TiO2 thin films

TiO2thin films with 0.2 wt%, 0.4 wt%, 0.6wt%, and 0.8 wt% Fe were prepared on glass and silicon substrates using sol–gel spin coating technique. The optical cut-off points are increasingly red-shifted and the absorption edge is shifted over the higher wavelength region with Fe content increasing. As Fe content increases, the optical band gap decreases from 3.03 to 2.48 eV whereas the tail width increases from 0.26 to 1.43 eV. The X-ray diffraction（XRD） patterns for doped films at 0.2 wt% and0.8 wt% Fe reveal no characteristic peaks, indicating that the film is amorphous whereas undoped TiO2exhibits（101） orientation with anatase phase. Thin films of higher Fe content exhibit a homogeneous, uniform, and nanostructured highly porous shell morphology.     

Performance Tuning and Reliability Analysis of the Electrostatically Configured Nanotube Tunnel FET with Impact of Interface Trap Charges

Silicon - This paper examines, an electrostatically configured Nano-Tube Tunnel Field-Effect Transistor (ED-NTTFET). During the fabrication process, different charges such as fixed charge, oxide...     

Design of Dual-Gate P-type IMOS Based Industrial Purpose Pressure Sensor

Silicon - In this treatise, we have proposed a Single Material Gate–Dual Gate Impact Ionization Metal Oxide Semiconductor (SMG DG-IMOS) based Pressure Sensor. The pressure sensor has the most...     

Growth of nano-particles of Al2O3, AlN and iron oxide with different crystalline phases in a thermal plasma reactor

The paper presents the experimental results showing that the crystalline phase of the nano-particles, synthesized in a DC transferred arc thermal plasma reactor, critically depend on the operating pressure in the reaction zone. The paper reports about the changes in crystalline phases of three different compounds namely: aluminium oxide (Al₂O₃), aluminium nitride (AlN) and iron oxide (Fe_xO_y) synthesized at 760 Torr and 500 Torr of operating pressures. The major outcome of the present work is that the phases having higher defect densities are more probable to form at the sub-atmospheric operating pressures. The variations in the crystalline structures are discussed on the basis of the change in the temperature during the nucleation process, prevailing at the boundary of the plasma, on account of the ambient pressures. The as-synthesized nano-particles were examined by X-ray diffraction analysis and transmission electron microscopy. In addition, the confirmatory analysis of the crystalline phases of iron oxides was carried out with the help of Mössbauer spectroscopy.     

Functionally modified gelatin microspheres as a growth factor’s delivery system: development and characterization

One of the advances in biotechnology has been the development of the capability to produce large quantities of highly purified polypeptides and proteins. Unfortunately, the circulatory half-lives of many of these agents are short, usually of the order of minutes and the time required for a response in tissues is usually long compared to the half-life. Hence, there is always demand for polymeric systems which can deliver the proteins for prolonged period and also to protect the molecules from degradation. The present work was attempted to develop heparin-functionalized gelatin microspheres (HMS) to deliver heparin-binding growth factors particularly for wound-healing applications. The heparin conjugation was carried out using EDC/NHS coupling protocol. Heparin-binding EGF-like growth factor (HB-EGF) was loaded in HMS and its in vitro release behaviour in an environment with or without proteases was studied. The bioactivity of the HB-EGF released from the microspheres was assessed using NIH 3T3 mouse embryonic fibroblast culture. The extent of heparin modification was found to be 1.97 μmol/g of HMS and demonstrated significant protection against enzymatic degradation and sustained release of HB-EGF for more than 10 days. The bioactivity of HB-EGF released from the HMS was retained during the observed release period. The HMS was also found to be non-toxic as determined by calcein AM fluorescent staining. The overall study suggests that the HMS could be used as a growth factor’s delivery component in tissue engineering scaffolds particularly for wound-healing applications.     

Optimization of sensitizer concentration for upconversion photoluminescence of Yb3+/Er3+: La10W22O81 nanophosphor rods

Yb³⁺/Er³⁺codoped La₁₀W₂₂O₈₁ (LWO) nanophosphor rods have been successfully synthesized by a facile hydrothermal assisted solid state reaction method, and their upconversion photoluminescence properties were systematically studied. X-ray diffraction patterns revealed that the nanophosphors have an orthorhombic structure with space group Pbcn (60). A microflowers-like morphology with irregular hexagonal nanorods was observed using field emission scanning electron microscopy for the Yb³⁺(2 mol%)/Er³⁺(2 mol%):LWO nanophosphor. The shape and size of the nanophosphor and the elements along with their ionic states in the material were confirmed by TEM and XPS studies, respectively. A green upconversion emission was observed in the Er³⁺: LWO nanophosphors under 980 nm laser excitation. A significant improvement in upconversion emission has been observed in the Er³⁺: LWO nanophosphors by increasing the Er³⁺ ion concentration. A decrease in the upconversion emission occurred due to concentration quenching when the doping concentration of Er³⁺ ions was greater than 2 mol%. An optimized Er³⁺(2 mol%): LWO nanophosphor exhibited a strong near infrared emission at 1.53 μm by 980 nm excitation. The green upconversion emission of Er³⁺(2 mol%): LWO was remarkably enhanced by co-doping with Yb³⁺ ions under 980 nm excitation because of energy transfer from Yb³⁺ to Er³⁺. The naked eye observed this upconversion emission when co-doping with 2 mol% Yb³⁺. In order to obtain the high upconversion green emission, the optimized sensitizer concentration of Yb³⁺ ions was found to be 2 mol%. The upconversion emission trends were studied as a function of stimulating laser power for an optimized sample. Moreover, the NIR emission intensity has also been enhanced by co-doping with Yb³⁺ ions due to energy transfer from Yb³⁺ to Er³⁺. The energy transfer dynamics were systematically elucidated by energy level scheme. Colorimetric coordinates were determined for Er³⁺ and Yb³⁺/Er³⁺: LWO nanophosphors. The energy transfer mechanism was well explained and substantiated by several fluorescence dynamics of upconversion emission spectra and CIE coordinates. The results demonstrated that the co-doped Yb³⁺(2 mol%)/Er³⁺(2 mol%): LWO nanophosphor material is found to be a suitable candidate for the novel upconversion photonic devices.     

Synthesis and Humidity Sensing Properties of NiO Intercalated Polyaniline Nanocomposite

The exercising cooperative and interfacial properties of metal oxide and conducting polymer as a sensing material for humidity detection was the focal point of this study. In this piece of work nano sized NiO and its composite with polyaniline has been prepared. The cooperative effects of NiO on stuructural, morphology, humidity sensing behaviour of PANI has been investigated. Prepared materials were characterized by infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM),UV–VIS spectroscopy and Four probe techniques. The result reveals that the NiO strongly influences on polymer chain, crystallinity, stability, electrical and optical properties of PANI, which improves its viability in technology development. Finally, PANI/NiO was used for electrochemical humidity sensing of a closed atmosphere. The result reveals that 100 times increase in sensitivity of PANI due to the presence of NiO nano particles. Finally, the results indicate that the impact of NiO on PANI makes it promising perspective materials for humidity monitoring of closed chamber with improved sensing parameters over several method and materials.