Comparison of gas sensing properties based on hollow and porous α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanotubes

Hollow and porous α-Fe₂O₃ nanotubes were successfully synthesized by single nozzle electrospinning method followed by annealing treatment. The crystal structures and morphologies of the as-prepared materials were characterized by X-ray diffraction and scanning electron microscopy, respectively. The as-prepared materials were applied to construct gas sensor devices which gas sensing properties were further investigated. The obtained results revealed that porous α-Fe₂O₃ nanotube gas sensors exhibit a markedly enhanced gas sensing performance compared with hollow α-Fe₂O₃ nanotube gas sensors, which was about three times higher to 100 ppm acetone at 240 °C. Interestingly, hollow and porous α-Fe₂O₃ nanotube gas sensors both showed fast response–recovery time and good selectivity, but the porous ones possessed the shorter recovery time. The improved properties could be attributed to the unique morphology of porous nanotubes. Thus, further improvement of performance in metal-oxide-semiconductors materials could be realized by preparation the unique porous structures of nanotubes. Moreover, it is expected that porous metal-oxide-semiconductors nanotubes could be further design as promising candidates for gas sensing materials.     

La<Subscript>1−x</Subscript>Ag<Subscript>x</Subscript>FeO<Subscript>3</Subscript>/halloysites nanocomposite with enhanced visible light photocatalytic performance

La_1?xAg_xFeO₃/halloysites nanotubes (HNTs) nanocomposite was synthesized by sol–gel method. It was characterized by X-ray diffraction, transmission electron microscope, Fourier transform infrared spectroscopy and UV–visible diffused reflectance spectroscopy measurements. The photo-activity of the La_1?xAg_xFeO₃/HNTs nanocomposite was evaluated via degradation of methylene blue (MB) under visible-light irradiation. The results showed that the HNTs with unique pore structure favored the adsorption of organic molecules. Adequate Ag⁺ doping improved the absorption ability for visible light. The La_0.95Ag_0.05FeO₃/HNTs demonstrated the best photocatalytic performance, which achieved as high as 99 % for MB degradation exposed 2 h irradiation. However,further increasing of Ag⁺ doping gradually reduced the photocatalytic activity. The nanocomposite catalyst showed outstanding recyclability after eight cycles which still remained up to 90 %.     

强磁场对硅锰铸钢于A_1点附近等温珠光体相变的影响

通过开展12 T强磁下硅锰铸钢(50Si_2Mn_3)于A_1点温度附近不同等温时间的热处理试验,并对比强磁场与无磁场条件下等温珠光体相变试验结果,研究了磁场对珠光体转变量及组织形貌的影响。研究表明,对于50Si_2Mn_3在A1点以下较高温度范围内,强磁场可缩短珠光体相变的孕育期,促进硅锰铸钢珠光体转变,使其转变量明显增加;强磁场能够提高珠光体转变临界点,使50Si_2Mn_3在A1点以上等温过程中能够发生珠光体相变。     

Aggregation-induced emission luminogen-assisted stimulated emission depletion nanoscopy for super-resolution mitochondrial visualization in live cells

Nano Research - Aggregation-induced emission luminogens (AIEgens) are fluorescent agents that are ideal for bioimaging and have been widely used for organelle targeting, cellular mapping, and...     

Computational Parametric Analysis of Cellular Solids with the Miura-Ori Metamaterial Geometry under Quasistatic Compressive Loads

Origami-based metamaterials have widespread application prospects in various industries including aerospace, automotive, flexible electronics, and civil engineering structures. Among the wide range of origami patterns, the fourfold tessellation known as Miura-ori is of particular attraction to engineers and designers. More specifically, researchers have proposed different 3D structures and metamaterials based on the geometric characteristics of this classic origami pattern. Herein, a computational modeling approach for the design and evaluation of 3D cellular solids with the Miura-ori metamaterial geometry which can be of zero or nonzero thicknesses is presented. To this end, first, a range of design alternatives generated based on a numerical parametric model is designed. Next, their mechanical properties and failure behavior under quasistatic axial compressive loads along three perpendicular directions are analyzed. Then, the effects of various geometric parameters on their energy absorption behavior under compression in the most appropriate direction are investigated. The findings of this study provide a basis for future experimental investigations and the potential application of such cellular solids for energy-absorbing purposes.     

湖北省城镇垃圾处理政策研究

在对垃圾处理现状进行系统的调查研究的基础上,作者提出了湖北省城镇垃圾处理的合理改革与相应措施．