The slow start power controlled MAC protocol for mobile ad hoc networks and its performance analysis

We propose and evaluate the performance of a new MAC-layer protocol for mobile ad hoc networks, called the Slow Start Power Controlled (abbreviated SSPC) protocol. SSPC improves on IEEE 802.11 by using power control for the RTS/CTS and DATA frame transmissions, so as to reduce energy consumption and increase network throughput and lifetime. In our scheme the transmission power used for the RTS frames is not constant, but follows a slow start principle. The CTS frames, which are sent at maximum transmission power, prevent the neighbouring nodes from transmitting their DATA frames at power levels higher than a computed threshold, while allowing them to transmit at power levels less than that threshold. Reduced energy consumption is achieved by adjusting the node transmission power to the minimum required value for reliable reception at the receiving node, while increase in network throughput is achieved by allowing more transmissions to take place simultaneously. The slow start principle used for calculating the appropriate DATA frames transmission power and the possibility of more simultaneous collision-free transmissions differentiate the SSPC protocol from the other MAC solutions proposed for IEEE 802.11. Simulation results indicate that the SSPC protocol achieves a significant reduction in power consumption, average packet delay and frequency of RTS frame collisions, and a significant increase in network throughput and received-to-sent packets ratio compared to IEEE 802.11 protocol.     

Gait recognition using radon transform and linear discriminant analysis.

A new feature extraction process is proposed for gait representation and recognition. The new system is based on the Radon transform of binary silhouettes. For each gait sequence, the transformed silhouettes are used for the computation of a template. The set of all templates is subsequently subjected to linear discriminant analysis and subspace projection. In this manner, each gait sequence is described using a low-dimensional feature vector consisting of selected Radon template coefficients. Given a test feature vector, gait recognition and verification is achieved by appropriately comparing it to feature vectors in a reference gait database. By using the new system on the Gait Challenge database, very considerable improvements in recognition performance are seen in comparison to state-of-the-art methods for gait recognition.     

Tailoring Wetting Properties at Extremes States to Obtain Antifogging Functionality

Fog formation decreases light transmission of optically clear materials. A promising approach to address this problem is to control the wetting properties of the material at extremes states, which requires imparting micro and nano morphology features on the surface. However, such features may affect the optical properties of the surface. In this work, superhydrophobic and superhydrophilic surfaces, with different morphology characteristics ranging from nanoscale to hierarchical micro-nanoscale are fabricated and evaluated in order to investigate which wetting extreme and surface morphology is more suitable to preserve the light-transmitting properties and exhibit antifogging functionalities. The performance of the aforementioned surfaces is compared for the first time in two different testing modes: under intense fog flow and no surface cooling, and under no-flow and surface cooling, which enhances dew condensation on the surfaces. It is demonstrated that superhydrophilic surfaces with nanoscale morphology maintain their optical transmittance under fog flow for more than 20 min. This duration is one of the longest reported in the literature revealing the long-term antifogging functionality of the proposed surfaces. Finally, by tailoring the morphology and the surface wetting properties, an optically switching surface (initially “milky” which becomes “clear”) when exposed to humidity is demonstrated.     

Mobile tele-echography: user interface design.

Ultrasound imaging allows the evaluation of the degree of emergency of a patient. However, in some instances, a well-trained sonographer is unavailable to perform such echography. To cope with this issue, the Mobile Tele-Echography Using an Ultralight Robot (OTELO) project aims to develop a fully integrated end-to-end mobile tele-echography system using an ultralight remote-controlled robot for population groups that are not served locally by medical experts. This paper focuses on the user interface of the OTELO system, consisting of the following parts: an ultrasound video transmission system providing real-time images of the scanned area, an audio/video conference to communicate with the paramedical assistant and with the patient, and a virtual-reality environment, providing visual and haptic feedback to the expert, while capturing the expert's hand movements. These movements are reproduced by the robot at the patient site while holding the ultrasound probe against the patient skin. In addition, the user interface includes an image processing facility for enhancing the received images and the possibility to include them into a database.     

Unsupervised Segmentation of Stereoscopic Video Objects: Constrained Segmentation Fusion Versus Greedy Active Contours

In this paper, we present a novel memory access reduction scheme (MARS) for two-dimension fast cosine transform (2-D FCT). It targets programmable DSPs with high memory-access latency. It reduces the number of memory accesses by: 1) reducing the number of weighting factors and 2) combining butterflies in vector-radix 2-D FCT pruning diagram from two stages to one stage with an efficient structure. Hardware platform based on general purpose processor is used to verify the effectiveness of the proposed method for vector-radix 2-D FCT pruning implementation. Experimental results validate the benefits of the proposed method with reduced memory access, less clock cycle and fewer memory space compared with the conventional implementation.     

Parlay‐based service provision in circuit‐ and packet‐switched telecommunications networks

The spectrum of potential value added services over Internet telephony is wide, but the current service provision solutions are inadequate or proprietary. The nature of Internet differs significantly from that of circuit switched network, however, VoIP architectures can capitalize service control architectures in the PSTN world. We describe such an architecture based on the intelligent network and the Parlay, employing distributed objects and mobile agents as enabling technologies. This architecture has been implemented in the PSTN and the Internet and it has provided a framework for service provisioning, augmenting the space of supported services. Copyright © 2004 John Wiley & Sons, Ltd.     

Control of Canal Flow by Adjoint Sensitivity Method

A new method for control of unsteady flow in open channels is presented. Control is achieved using an iterative approach, the Broyden, Fletcher, Goldfarb, and Shanno quasi-Newton method that utilizes an adjoint sensitivity method to efficiently compute gradient information. The adjoint equations are derived from the differential form of the full shallow-water equations in one dimension and the resulting sensitivies allow a wide class of flows to be controlled. In addition, the adjoint sensitivity method permits both scheduled and adaptive flow control to be achieved. Application of the method to scheduled flow control is presented.     

A sensor monitoring system for telemedicine,safety and security applications

A sensor system capable of medical, safety and security monitoring in avionic and other environments (e.g. homes) is examined. For application inside an aircraft cabin, the system relies on an optical cellular network that connects each seat to a server and uses a set of database applications to process data related to passengers’ health, safety and security status. Health monitoring typically encompasses electrocardiogram, pulse oximetry and blood pressure, body temperature and respiration rate while safety and security monitoring is related to the standard flight attendance duties, such as cabin preparation for take-off, landing, flight in regions of turbulence, etc. In contrast to previous related works, this article focuses on the system’s modules (medical and safety sensors and associated hardware), the database applications used for the overall control of the monitoring function and the potential use of the system for security applications. Further tests involving medical, safety and security sensing performed in an real A340 mock-up set-up are also described and reference is made to the possible use of the sensing system in alternative environments and applications, such as health monitoring within other means of transport (e.g. trains or small passenger sea vessels) as well as for remotely located home users, over a wired Ethernet network or the Internet.     

Equilibrium and dynamic swelling of polyacrylates

Polyacrylates were prepared by solution polymerization of partially neutralized acrylic acid at 37°C. The swelling behavior of the polyacrylates was examined using equilibrium and dynamic swelling studies. Equilibrium swelling studies in deionized water were used to determine the molecular weight between crosslinks using the Flory-Rehner theory. The amount of crosslinking agent incorporated into the network was a function of the nominal crosslinking ratio. Dynamic swelling studies in saline solutions were used to investigate the initial swelling rate for the polyacrylates. Swelling studies of the polyacrylates in saline solutions under load were used to elucidate the degree of swelling under load, the compliance, and sample elasticity.