Impact of the mechanical characteristics of weak rocks and trona ore beds on the main drift deformation at the beypazari mine, Turkey

In northern Turkey, the Main Drift, T-2000, and a roadway, T-3000, were excavated for Beypazari trona (natural soda) underground mine project between the years 1999 and 2001. This work was one of the most important mining projects in Turkey in the last decade. T-2000 was designed as a main drift with a length of 965 m, 14° inclined and excavated with a cross-sectional area of 18 m². The T-3000 roadway was driven in the trona beds for the first production panel. In this study, in situ and laboratory studies have been made to define the formations through which the drift has been driven. In situ engineering geology measurements were carried out consisting of field observation, mapping, boreholes and laboratory tests on samples collected from the trona field and the boreholes. After drift excavation and support installation, the deformations and the loads on the supports were measured. As a result of this study, the deformational characteristics of the trona ore beds and weak rocks and their effect on the main drift (T-2000) deformation have been determined. The importance of this study lies in the fact that most natural soda mines in the world apply room and pillar mining methods. This study is probably the first investigation on underground openings with steel-set support systems and rock deformations in natural soda beds.     

Investigation of Thermal Properties of High-Density Polyethylene/Aluminum Nanocomposites by Photothermal Infrared Radiometry

In this study, thermal properties of high-density polyethylene (HDPE) filled with nanosized Al particles (80 nm) were investigated. Samples were prepared using melt mixing method up to filler volume fraction of 29 %, followed by compression molding. By using modulated photothermal radiometry (PTR) technique, thermal diffusivity and thermal effusivity were obtained. The effective thermal conductivity of nanocomposites was calculated directly from PTR measurements and from the measurements of density, specific heat capacity (by differential scanning calorimetry) and thermal diffusivity (obtained from PTR signal amplitude and phase). It is concluded that the thermal conductivity of HDPE composites increases with increasing Al fraction and the highest effective thermal conductivity enhancement of 205 % is achieved at a filler volume fraction of 29 %. The obtained results were compared with the theoretical models and experimental data given in the literature. The results demonstrate that Agari and Uno, and Cheng and Vachon models can predict well the thermal conductivity of HDPE/Al nanocomposites in the whole range of Al fractions.     

Rheology of fiber-reinforced cementitious materials

An improved understanding of the influence of fibers on the rheology of cementitious systems is needed so that fiber reinforcement can be used effectively. However, conventional rheometers are not suitable for testing stiff fiber-reinforced materials. In this study, a parallel plate rheometer that is capable of evaluating the rheology of stiff fiber-reinforced cement paste and mortar systems was designed and built. The governing equations for the rheometer were derived and experimental procedures were developed that yielded reproducible results. A comparative analysis of the custom-built parallel plate rheometer, a commercial rheometer and the values reported in the literature, indicated that the measurements obtained using the rheometer were reasonable. The rheometer was then used to evaluate the rheology of a variety of cement paste systems, including stiff steel fiber-reinforced cement pastes.     

Thermoresponsive hydrogels based on renewable resources

This work aims to synthesize novel thermoresponsive hydrogels from renewable resources, bacterial cellulose (BC), and castor oil (CO), and to investigate the effect of CO on physical and thermal behaviors of BC/Poly(N-isopropylacrylamide) (PNIPAM) hydrogels. The structural properties of the hydrogels are analyzed by Fourier-transform infrared (FTIR) spectroscopy. Differential scanning calorimeter (DSC) technique and thermogravimetric analysis (TGA) are also performed to examine the thermal properties of the hydrogels. The morphological differences of the hydrogels are analyzed by scanning electron microscope (SEM). The thermoresponsive performances of the hydrogels are examined by swelling and deswelling behaviors. The hydrogel with CO is found to be more sensitive to temperature changes than the one without CO. Deswelling study demonstrates 91 and 25% of water loss for hydrogels with and without CO, respectively. The present study shows a novel approach to synthesize thermoresponsive hydrogels with renewable resources for biomedical applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48861.     

Synthesis, electrochemical and spectroelectrochemical characterization of novel soluble phthalocyanines bearing chloro and quaternizable bulky substituents on peripheral positions

A new phthalonitrile derivative (2), bearing diethylaminophenoxy - and chloro-substituents at peripheral positions was synthesized in this work. Cyclotetramerization of (2) in hexanol gave the desired metal-free (4) and metallophthalocyanines (5-8). These new phthalocyanines (4-8) were converted into water-soluble quaternized products by the reaction with methyl iodide (9-11). The novel compounds have been characterized by using elemental analysis, UV-Vis, FT-IR, ¹H NMR and MS spectroscopic data. The aggregation behaviors of the phthalocyanine complexes were studied in different solvents and concentrations. Electrochemical and spectroelectrochemical characterization of the complexes were also performed in solution. Cobalt phthalocyanine gives both metal-based and ring-based reduction processes in comparison to the complexes having 2H⁺, Zn²⁺, Ni²⁺ and Cu²⁺ metal center which give only ring-based reduction processes. Electrochemical and spectroelectrochemical measurements exhibit that all complexes oxidatively electro-polymerize on the Pt working electrode during repetitive cyclic voltammetry measurements. An in-situ electrocolorimetric method was applied to investigate the color of the electrogenerated anionic and cationic forms of the complexes for possible electrochromatic applications.     

Chrome and cobalt-based novel electrolyte systems for redox flow batteries

In the present work, novel redox ion-pairs (as cobalt and chromium) have been used in aqueous medium for the first time in the literature as electrolyte component of redox flow battery system. The electrochemical performance of the Co(II) and Cr(III) redox species as anolyte and catholyte was investigated by cyclic charge-discharge tests, respectively. Electrochemical behaviors of Cr(III) solutions in sulfuric acid solution were determined by using differential pulse voltammetry, electrochemical impedance spectroscopy and cyclic voltammetry via a typical three-electrode system. Morphological analyses of surface of pencil graphite electrode, which was used as anode in differential pulse voltammetric analysis, were done by scanning electron microscopy. Discharge capacity of the battery system consisting of 1.0 M Cr(III) as anolyte (negative electrolyte) and 1.0 M of Co(II) as catholyte (positive electrolyte) in 4.0 M of sulfuric acid was determined as 682.5 mAh (1.4 Ah L⁻¹) with 4 mA cm⁻² charge current density and 0.4 mA cm⁻² discharge current density. Voltage efficiency, energy efficiency and coulombic efficiency of the battery were 70.1%, 53.8% and 57.2%, respectively. The discharge cell potential of the battery was also determined as 1.40 V.     

Biodiesel production from waste chicken fat based sources and evaluation with Mg based additive in a diesel engine

In this study, chicken fat biodiesel with synthetic Mg additive was studied in a single-cylinder, direct injection (DI) diesel engine and its effects on engine performance and exhaust emissions were studied. A two-step catalytic process was chosen for the synthesis of the biodiesel. Methanol, sulphuric acid and sodium hydroxide catalyst were used in the reaction. To determine their effects on viscosity and flash point of the biodiesel, reaction temperature, methanol ratio, type and amount of catalyst were varied as independent parameters. Organic based synthetic magnesium additive was doped into the biodiesel blend by 12 μmol Mg. Engine tests were run with diesel fuel (EN 590) and a blend of 10% chicken fat biodiesel and diesel fuel (B10) at full load operating conditions and different engine speeds from 1800 to 3000 rpm. The results showed that, the engine torque was not changed significantly with the addition of 10% chicken fat biodiesel, while the specific fuel consumption increased by 5.2% due to the lower heating value of biodiesel. In-cylinder peak pressure slightly rose and the start of combustion was earlier. CO and smoke emissions decreased by 13% and 9% respectively, but NO_x emission increased by 5%.     

Introducing two landscape components from Turkey: Irim and Kesik

A very particular set of landscape components, namely the irim and the kesik, found in the peri-urban rural area called Karabaglar, are considered. This area is in the contiguous land of the city of Mugla, in southwestern Turkey, and is administered by its municipality. It has a rural character, yet also includes summerhouses for the inhabitants of the city. Physical resemblance of the irim and the kesik to the hedgerow suggests similar functions, but a closer look reveals that they have a wider range of features and aspects. Functioning not only as a marker of agricultural land sub-divisions, they also play an important role in the hydrology of the area. While their specific traditional features can be used in designed landscapes, the intention here is, first, to introduce the irim, the kesik and the very special setting offered by Karabaglar, which are now under the pressure of urban encroachment. A comparison with the hedgerow is nevertheless useful in order to better understand related aspects and features.     

Application of temperature-controlled attenuated total reflectance-mid-infrared (ATR-MIR) spectroscopy for rapid estimation of butter adulteration

There is a continual need for development of rapid methods that meet or exceed the detection levels of currently available analytical methods for authentication of food products. The objective of this study was to evaluate temperature-controlled attenuated total reflectance-mid-infrared (ATR-MIR) spectroscopy combined with multivariate analysis as a simple and rapid method for the determination of butter adulteration as a dairy food system. Commercial samples of butter fat were adulterated with margarine fat at levels ranging from 0% to 100% (v/v). Partial least square regression (PLSR) models gave standard error of cross-validation (SECV) of <1.2% (v/v) and correlation coefficients (r) > 0.99. Excellent predicting capabilities were obtained using an external validation set consisting of butter adulterated with margarines at ratios of 2.5%, 13%, and 45%. We have demonstrated the feasibility of a temperature-controlled ATR-MIR spectroscopy technique that would allow for rapid analysis of dairy products.