高性能MCU的FPGA原型验证系统研究与平台实现

本文研究并实现了一种基于Cortex-A7核的高性能MCU在FPGA原型阶段的验证平台。该设计研究可以针对高性能MCU芯片或其FPGA原型验证阶段的软硬件验证环境快速搭建,通过交互式、软硬件协同的方式对MCU芯片各个模块功能进行实时、可靠的功能验证。高效的FPGA原型验证可以提高MCU研发速度、缩短验证时间、提高验证效率、及时发现芯片设计的缺陷、缩短芯片研发周期。     

基于稳健设计的SGNS算法的超参数调优方法

通常给定超参数的若干取值选取性能最大的为最优组合(称为直接选优法),但是此方法的稳健性差。为此,提出了一种基于稳健设计的超参数调优方法(称为稳健调优法)。具体地,以SGNS算法中的超参数调优为例,在词语推断任务上实验并得出:经方差分析得到SGNS算法中的七个超参数中的五个对算法预测性能有显著影响,确定为主控因子,其余两个确定为噪声因子,且主控因子中有三个对性能估计的方差有显著影响,因此,调优中仅从期望最大来直接选优是不合理的;稳健调优法与直接选优法两者在预测性能上没有显著差异,但稳健调优法对噪声因子具有较好的稳健性。稳健调优法对一般的深度神经网络的调参有实际的借鉴意义。     

Enhancement of the hydrogen storage properties of Mg/C nanocomposites prepared by reactive milling with molybdenum

The effect of Mo on the morphology, crystal structure and hydrogen sorption properties of Mg/C composites prepared by reactive milling was studied. Transmission electron microscopic(TEM) observation shows that Mg/C composites prepared with the addition of Mo are of nanoscale with particle size about 20-120 nm after 3 h of milling under 1 MPaH_2. MgH_2 of tetrahedral crystal structure predominates in the materials with the geometric shape of oblique hexagonal prism. From X-ray diffraction(XRD) and hydrogen content studies, Mo and crystallitic carbon have a synergistic effect on promoting the hydrogenation rate in the reactive milling process. From differential scanning calorimetric(DSC) studies, the dehydrogenation peak temperature of the Mg/C materials with Mo is lowered to 299-340 ℃.     

PVA纤维对混凝土抗裂性能的影响研究

针对锦屏二级水电站引水隧洞末端的4个调压井,通过掺入不同掺量的PVA纤维进行混凝土的开裂性能试验研究,得出PVA混凝土最佳纤维掺量为0.9%的结果。在此基础上,探讨了PVA纤维混凝土的配合比,提出了施工现场泵送适应性建议。     

柴油机自动减压起动装置的有限元分析

分析了柴油机自动减压装置的工作原理,针对在潍柴WP10型柴油机上加装的减压装置,利用Solidworks Simulation对压板进行了静力分析,找出了应力最大的部位和最大值,并按照Von Mises准则,判别压板满足刚度要求。     

Morphology,crystal structure and hydration of calcined and modified anhydrite

The effects of calcination and modification on the morphology （shapes and textures） and crystal structure of anhydrite powders were studied. The results show that, calcination at 100℃ causes anhydrite to disintegrate into smaller crystals, accompanied by a slight in- crease in d-spacing. Without calcination and modification, the solidification time and curing time of anhydrite are 15 and 77 h, respectively. After the treatment, however, the solidification time and curing time are shortened significantly to 9.5 and 14 rain, respectively. The com- pressive and flexural strengths of hydration products made from the treated anhydrite reach 10.2 and 2.0 MPa, respectively. The much shorter solidification and curing time make it possible to use anhydrite as a building and construction material.     

一种改进的ViBe目标检测算法

现有ViBe目标检测算法存在误检率高,得到的结果噪声较大的问题。为此本文提出了一种将判定阈值自适应规则与优化结果反馈机制相结合的改进算法。该算法首先使用样本自身统计值作为阈值进行目标检测;接着对检测结果进行去噪、形态学处理等优化处理;最后将优化后的检测结果反馈给背景模型更新过程使检测更精确。与传统的ViBe算法相比,本文算法可更精确的提取出运动目标,误判率低,过检率较原始算法降低10%-20%。实验结果证明了该算法的有效性。     

The relation between the parabolic rate constants for the internal oxidation of binary alloys in terms of weight gain or thickness

A calculation of the parabolic rate law for internal oxidation in binary alloys expressed in terms of weight gain shows that its dependence on the concentration of the most-reactive component is different from that predicted by the classical Wagner treatment for the rate constant expressed in terms of thickness of the internal oxidation zone. It is shown that the ratio between the two rate constants for a given system is a very sensitive function of the concentration of the reactive element in the alloy.     

Mechanical nondiscoloring and antistretching photonic crystal films based on Zn2+ coordination and hydroxypropyl methylcellulose

Mechanical nondiscoloring and antistretching photonic crystal (PC) films, especially those with stable structure colors during deformation, have great potential applications in wearable display devices, decoration, and packaging. Here, PC films with antistretching and invariant structural colors during deformation were prepared, by combining Zn²⁺ coordinated elastic material and hydroxypropyl methylcellulose (HPMC) with polystyrene@silica (PS@SiO₂) colloidal crystals. The PC films release energy by forming local fractures at a microscopic level during the straining process but the lattice spacing and effective refractive index of the local array do not change. According to the Bragg law, the structure color remains unchanged. The introduction of HPMC gave the PC films excellent tensile properties, and the maximum tensile strength reached 10 MPa. And after 100 times of stretching, bending and compression cycles, the structural color remained unchanged.     

Effect of hollow glass beads on density and mechanical properties of silicone rubber composites

In this work, low density hollow glass beads (HGB)/silicon rubber (SR) composites were prepared by solution method and flocculation process. The prepared samples were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, tensile test, and friction test. The results show that the densities of SR composites decrease from 1.140 to 0.792 g/cm³ with the addition of HGB. By comparing theoretical density with true density, it can be estimated that the ratio of shattered HGB increase from 8.79% to 24.76%. Especially, the mechanical properties of SR composites were improved by surface modification of HGB. By adding surface-modified HGB at 5 and 10 wt%, the tensile strengths of SR composites were enhanced by 17.8% and 28.2%, respectively. In addition, tear strength, shore A hardness, compression set, and friction property were significantly ameliorated. Furthermore, the mechanism of surface-modified HGB in mechanical properties was analyzed.