Analysis of protein adsorption and binding at biosensor polymer interfaces using X-ray photon spectroscopy and scanning electrochemical microscopy

We describe a method, based on X-ray photoelectron spectroscopy (XPS) measurements, to assess the extent of protein adsorption or binding on a variety of different muTAS and biosensor interfaces. Underpinning this method is the labeling of protein molecules with either iodine- or bromine-containing motifs by using protocols previously developed for radiotracer studies. Using this method, we have examined the adsorption and binding properties of a variety of modified electrodeposited polymer interfaces as well as other materials used in muTAS device fabrication. Using polymer interfaces modified with poly(propylene glycol) (PPG) chains, our results indicate that a chain of at least approximately 30 monomer units is required to inhibit nonspecific adsorption from concentrated protein solutions. The XPS methodology was also used to probe specific binding of avidins and enzyme conjugates thereof to biotinylated and mixed biotin/PPG-modified polymer interfaces. In one example, using competitive binding, it was established that the mode of binding of a peroxidase-streptavidin conjugate to a biotinylated modified polymer interface was primarily via the streptavidin moiety (as opposed to nonspecific binding via the enzyme conjugate). XPS evaluation of nonspecific and specific peroxidase-streptavidin immobilization on various functionalized polymers has guided the design and fabrication of functionalized interdigitated electrodes in a biosensing muTAS device. Subsequent characterization of this device using scanning electrochemical microscopy (SECM) corroborated the adsorption and binding previously inferred from XPS measurements on macroscale electrodes.     

Gene expression within cell-sized lipid vesicles

Functional protein synthesis was observed in cell-sized lipid vesicles following encapsulation of a gene-expression system. Expression of rsGFP (red-shifted green fluorescent protein) within individual vesicles was observed by fluorescence microscopy. Interestingly, at the early stage of the reaction, the expression efficiency inside the vesicle was remarkably higher than that in the solution outside. The synthesized rsGFP in individual vesicles is safe from attack by proteinase K added to the external aqueous solution. Studies on cell-sized vesicles expressing protein should contribute to a fundamental understanding of certain aspects of living systems and will be useful for practical applications, such as the construction of microreactors.     

Electrochemical Fabrication of Metallic Nanowires and Metal Oxide Nanopores

A nuclear track etched polycarbonate membrane filter with numerous cylindrical nanopores was applied as a nanoporous template for growing metallic nanowires. Nickel, cobalt, and iron nanowires were electrodeposited into the cylindrical nanopores. Cathodic polarization curves were measured to determine an optimum condition for growing nanowires. The shape of nanowires was observed using scanning electron microscope (SEM) and the crystal structure was analyzed using transmission electron microscopy (TEM). Diameter and length of nanowires corresponded to those of nanopores and each nanowire was composed of a single crystal. Anodized aluminum oxide films were also fabricated as a novel nanoporous template. The pore length and diameter was controlled changing anodizing conditions. Ordering behavior of nanopores array in an anodized aluminum oxide film was also investigated to make a novel nanoporous template with a highly ordered honeycomb array of nanopores.     

Superfluid-Normal Interface of 4He Near a Wall

We observed a profile of nonequilibrium superfluid-normal (SN) interface of ⁴He near a vertical wall. A glass, brass or copper wall was used. The SN interface was produced by cooling liquid ⁴He in a bath from the bottom, where liquid ⁴He was pumped through a flow impedance in order to cool down the liquid. Superfluid (Normal fluid) occupied the lower (upper) part of the bath. The SN interface was visualized by three methods: simple visualization, shadowgraphy and schlieren method. The interface touched a vertical glass wall at almost 90°. A large hollow was observed near a brass wall which had intermediate thermal conductivity. Downward flow was observed on a copper wall due to the very good thermal conductivity of the wall. Various types of interface profile were observed depending on the thermal conductivity of the wall used.      

Microstructure of External Stress Whiskers and Mechanical Indentation Test Method

Lead-free commercial products have been dramatically increasing in the world markets as the restriction of certain hazardous substances (RoHS) directive in the European Union has been enacted. At the same time, the problem of “tin whiskers” has become one of the most serious problems in the industry. Growth of tin whiskers is believed to be related to residual stress inside the tin plating film and external compressive stress. Whiskers in fine-pitch connectors have affected the practical production of advanced digital equipment. The Japan Electronics and Information Technology Industries Association (JEITA) has proposed a new testing method to evaluate tin whiskers, especially for the fine-pitch connectors. This paper describes the microstructures of external stress whiskers and the mechanical indentation test method.     

Informative patches sampling for image classification by utilizing bottom-up and top-down information

In image classification based on bag of visual words framework, image patches used for creating image representations affect the classification performance significantly. However, currently, patches are sampled mainly based on processing low-level image information or just extracted regularly or randomly. These methods are not effective, because patches extracted through these approaches are not necessarily discriminative for image categorization. In this paper, we propose to utilize both bottom-up information through processing low-level image information and top-down information through exploring statistical properties of training image grids to extract image patches. In the proposed work, an input image is divided into regular grids, each of which is evaluated based on its bottom-up information and/or top-down information. Subsequently, every grid is assigned a saliency value based on its evaluation result, so that a saliency map can be created for the image. Finally, patch sampling from the input image is performed on the basis of the obtained saliency map. Furthermore, we propose a method to fuse these two kinds of information. The proposed methods are evaluated on both object categories and scene categories. Experiment results demonstrate their effectiveness.     

Shear properties of metal-free wooden load-bearing walls using plywood jointed with a combination of adhesive tape and wood dowels

In this study, the potential of wood-only (metal-free) load-bearing walls was proposed and tested based on the idea of using the same type of material throughout wherever possible while improving basic properties such as strength, sound insulation, and heat insulation. Specifically, a technique was tested of combining pressure sensitive adhesive tape and wood dowels in place of nails for load-bearing structures with panel reinforcement represented by wood-frame construction. For this paper, its strength was evaluated by conducting in-plane shear tests, which revealed that the initial rigidity and maximum load of the proposed test specimens were greater than that of specimens using nails for jointing. However, the shear load factor, which is calculated based on some strength parameters and which forms the foundation of housing strength design, was slightly lower than that of the nail-jointed specimen. This was because there was a large decline in post-collapse resistance and a lower calculated absorbed energy caused by brittleness. The early detachment of panels was also revealed as a problem in the tests.     

Cogging Torque Characteristics of a Magnetic‐Geared Motor

This paper describes the cogging torque characteristics of a magnetic‐geared motor with permanent magnets only on the high‐speed rotor. The operational principle, which is different from that of the magnetic‐geared motor with permanent magnets on the high‐speed rotor and stator, is described. The torque characteristics, especially the order of the cogging torque, are mathematically formulated and verified by conducting 3D finite element analysis and carrying out measurements on a prototype. A novel cogging torque reduction method is proposed and verified as well.     

Efficiency of hydrogen internal combustion engine combined with open steam Rankine cycle recovering water and waste heat

A hydrogen internal combustion engine (HICE) wastes more heat, and producing nearly three times more water than a conventional engine. This paper describes the principle behind a novel waste heat recovery sub-system that exploits the water produced by an HICE as the working fluid for an open-cycle power generation system based on the Rankine cycle. Water from the HICE exhaust is superheated by the waste heat from the HICE and used to produce power in a steam expander. A fundamental thermodynamic model shows the contribution of the sub-system to the overall thermal efficiency of the HICE at various engine speeds, with and without a condenser. The results show that the condenser is not cost-effective and that the overall thermal efficiency with the proposed sub-system is 27.2% to 33.6%, representing improvements of 2.9% to 3.7%, at engine speeds of 1500 to 4500 rpm.