Intestinal absorption and biological effects of orally administered amorphous silica particles

Although amorphous silica nanoparticles are widely used in the production of food products (e.g., as anticaking agents), there is little information available about their absorption and biological effects after oral exposure. Here, we examined the in vitro intestinal absorption and in vivo biological effects in mice of orally administered amorphous silica particles with diameters of 70, 300, and 1,000 nm (nSP70, mSP300, and mSP1000, respectively) and of nSP70 that had been surface-modified with carboxyl or amine groups (nSP70-C and nSP70-N, respectively). Analysis of intestinal absorption by means of the everted gut sac method combined with an inductively coupled plasma optical emission spectrometer showed that the intestinal absorption of nSP70-C was significantly greater than that of nSP70. The absorption of nSP70-N tended to be greater than that of nSP70; however, the results were not statistically significant. Our results indicate that silica nanoparticles can be absorbed through the intestine and that particle diameter and surface properties are major determinants of the degree of absorption. We also examined the biological effects of the silica particles after 28-day oral exposure in mice. Hematological, histopathological, and biochemical analyses showed no significant differences between control mice and mice treated with the silica particles, suggesting that the silica nanoparticles evaluated in this study are safe for use in food production.     

High-Temperature Active Oxidation of Chemically Vapor-Deposited Silicon Carbide in CO─CO2 Atmosphere

Active oxidation behavior of CVD-SiC in CO─CO₂ atmospheres was investigated using a thermogravimetric technique in the temperature range between 1823 and 1923 K. The gas pressure ratio, P _CO2/ P _CO, was controlled between 10⁻⁴ and 10⁻¹ at 0.1 MPa. Active oxidation rates (mass loss rates) showed maxima at a certain value of P _CO2/ P _CO, ( P _CO2/ P _CO )^*, In a P _CO2/ P _CO region lower than the ( P _CO2/ P _CO)^* a carbon layer was formed on the SiC surface. In a P _CO2/ P _CO region higher than the ( P _CO2/ P _CO)^*, silica particles or a porous silica layer was observed on the SiC surface.     

Temperature- and pH-responsive photosensitization activity of polymeric sensitizers based on poly-N-isopropylacrylamide

We previously reported that a copolymer consisting of N-isopropylacrylamide (NIPAM) and benzophenone (BP) units, behaves as a photosensitizer showing temperature-controlled oxygenation activity in water (J. Am. Chem. Soc.2006, 128, 8751). This polymer shows a heat-induced oxygenation enhancement at low temperature region (5-20 °C), while showing a heat-induced oxygenation suppression at high temperature region (20-60 °C), resulting in an off-on-off activity profile against the temperature window. This is driven by a heat-induced phase transition of the polymer from coil to micelle and then to globule states. In the present work, effects of adding an amine component (N-[3-(dimethylamino)propyl]acrylamide: DMAPAM) to the polymer on the sensitization activity were studied, where the relationship between the phase transition behavior and the activity was clarified by several spectroscopic analyses. The polymers, poly(NIPAM_x-co-BP_y-co-DMAPAM_z), show activity controlled by temperature and pH. The off-on-off activity profile shifts to higher temperature with a pH decrease. This is because protonation of the DMAPAM units leads to an increase in the polymer polarity and, hence, the polymer aggregates at higher temperature. In addition, increase in the DMAPAM content of the polymer leads to further shift of the activity profile. In contrast, at pH < 8, no activity enhancement is observed because complete protonation of the DMAPAM units suppresses polymer aggregation.     

Measurement of liquid water content in cathode gas diffusion electrode of polymer electrolyte fuel cell

Water management in cathode gas diffusion electrode (GDE) of polymer electrolyte fuel cell (PEFC) is essential for high performance operation, because liquid water condensed in porous gas diffusion layer (GDL) and catalyst layer (CL) blocks oxygen transport to active reaction sites. In this study, the average liquid water content inside the cathode GDE of a low-temperature PEFC is experimentally and quantitatively estimated by the weight measurement, and the relationship between the water accumulation rate in the cathode GDE and the cell voltage is investigated. The liquid water behavior at the cathode is also visualized using an optical diagnostic, and the effects of operating conditions and GDL structures on the water transport in the cathode GDE are discussed. It is found that the liquid water content in the cathode GDE increases remarkably after starting the fuel cell operation due to the water production at the CL. At a high current density, the cell voltage drops suddenly after starting the operation in spite of a low water content in the cathode GDE. When the GDL thickness is increased, much water accumulates near the cathode CL and the fuel cell shuts down immediately after the operation. In the final section of this paper, the structure of cathode GDL that has several grooves for water removal is proposed to prevent water flooding and improve fuel cell performance. This groove structure is effective to promote the removal of the liquid water accumulated near the active catalyst sites.     

Removal of a high load of ammonia gas by a marine bacterium, Vibrio alginolyticus

A newly isolated marine bacterium, Vibrio alginolyticus was used to remove a high load of ammonia gas. By a stepwise increase in ammonia supply over the concentration range of 120-2000 ppm (v/v), complete removal of ammonia was observed from the start of the experiment in a suspended culture of the bacterium in basal medium containing 3% NaCl. When cells were inoculated onto an inorganic packing material in a biofilter, and a high load of ammonia was introduced continuously under nonsterile conditions, the average percentage of gas removed exceeded 85% for a 61-d operation. The maximum removal capacity and the complete removal capacity were 22.8 g-N/kg-dry packing material/d and 18.6 g-N/kg-dry packing material/d, respectively, which were about four times larger than those obtained in nitrifying sludge inoculated onto the same packing material. During this operation, the nonsterile air supply had no adverse effect on the removability of ammonia by V. alginolyticus.     

Iterative Design of the Reduced-Order Weight and Controller for the $H_{infty}$ Loop-Shaping Method Under Open-Loop Magnitude Constraints for SISO Systems

The H _infin loop-shaping method is known to be an effective control method. However, it has two drawbacks. The first is that it is difficult to select appropriate loop-shaping weights, and the second is that the resulting controller is very complex. For the first drawback, Lanzon has proposed a suboptimal loop-shaping weight design method. It is formulated as a generalized eigenvalue minimization problem (GEVP). This suboptimal loop-shaping weight design method provides high-order weights, exacerbating the second drawback. To resolve these two drawbacks, a reduced-order loop-shaping weight design method is proposed for SISO systems in this paper. In the proposed method, the weight structure is first fixed, and the weight is then decomposed into a frequency-dependent vector and parameter matrices characterizing the loop-shaping weight. Since the open-loop constraints are represented as linear matrix inequalities with respect to the parameter matrices, the proposed reduced-order loop-shaping weight design problem for SISO systems is formulated as a GEVP, as well as Lanzon's suboptimal loop-shaping weight design method. The proposed method can reduce the designer's burden, although it is only valid for SISO systems. The effectiveness of the proposed method is verified experimentally by velocity control of a belt-driven two-mass system.     

Elastic Model of Deformable Fingertip for Soft-Fingered Manipulation

We propose a straightforward static elastic model of a hemispherical soft fingertip undergoing large contact deformation, as occurs when robotic hands with the fingertips handle and manipulate objects, which is suitable for the analysis of soft-fingered manipulation because of the simple form of the model. We focus on formulating elastic force and potential energy equations for the deformation of the fingers which are represented as an infinite number of virtual springs standing vertically. The equations are functions of two variables: the maximum displacement of the hemispherical fingertip and the orientation angle of a contacting planar object. The elastic potential energy has a local minimum in our model. The elastic model was validated by comparison with results of a compression test of the hemispherical soft fingertip     

Trehalose embedding technique for high-resolution electron crystallography: application to structural study on bacteriorhodopsin

Trehalose was compared with glucose in its use as an embedding medium for the preparation of two-dimensional crystals for electron crystallographic structure analysis. Purple membranes (two-dimensional crystals of bacteriorhodopsin) embedded in either sugar were studied in a 'partially hydrated' state as well as after 'drying' of the specimen. Diffraction patterns of the four conditions, all showing spots to a resolution better than 3.0 A, were analysed and merged. In the case of glucose embedded specimens, the merging R-factor obtained from the diffraction patterns of dried specimens was significantly better than the one obtained from partially hydrated specimens. In the case of trehalose embedding, the merging R-factor for partially hydrated specimens was significantly better than the dried one. The trehalose embedded, partially hydrated specimens gave the best merging R-factor in all four cases.     

Mutation analysis of the WT1 gene in myelodysplastic syndromes

Infectious mononucleosis due to Epstein-Barr virus (EBV) is almost always a self-limited disease, most commonly seen in young adults. Hepatitis is a well-recognized complication of EBV infection that usually resolves spontaneously. Jaundice occasionally results from the unusual complication of autoimmune haemolytic anaemia rather than hepatitis. We report a 60-year-old man with severe cholestatic jaundice whose history, liver histology and laboratory findings suggested EBV infection. He also developed significant jaundice related to his hepatitis, but not to autoimmune haemolysis, a situation that led to diagnostic delay. Costly diagnostic laboratory tests and invasive procedures were performed to rule out a malignant extrahepatic biliary obstruction. Physicians need to be aware of this complication and EBV infection should be included in the differential diagnosis of cholestatic jaundice in the elderly.