The measurement of hydrogen activities in molten copper using an oxide protonic conductor

We have developed a hydrogen sensor for in situ measurements of hydrogen activities in molten copper. The sensor consists of a concentration cell utilizing a proton conductor, CaZr_0.9In_0.1O_3-δ, as the solid electrolyte. The electromotive force (emf) of the cell was generated by both hydrogen and oxygen activity gradients across the cell in a high-temperature region simulating the fire refining processes of copper. However, accurate hydrogen activity in molten copper could be evaluated from the emf if oxygen activity in molten copper was determined simultaneously by another concentration cell and if the hydrogen and the oxygen activities at the reference electrode were known. The performance of the sensor was studied under various conditions. The observed good response and reliability of the sensor show that it should be a powerful tool for improvement of the fire refining process of the molten copper. Theoretical treatment of the calculation of the emf of the concentration cells using a mixed ionic conductor, i.e., protonic and oxide ionic conductor, as solid electrolytes is also discussed briefly.     

Impaired tumorigenicity of IL-4-producing murine neuroblastoma cells in immunodeficient nude mice

OBJECTIVE: Our purpose was to evaluate the clinical utility of serum uric acid measurements in the hypertensive diseases of pregnancy. STUDY DESIGN: We performed a nested case-control study to assess the clinical utility of serum uric acid measurements in women with hypertensive diseases of pregnancy. We identified 344 women who had serum uric acid measurements at term and categorized them into five diagnostic groups according to definitions of hypertensive diseases in pregnancy published by the National Working Group on Hypertension in Pregnancy: transient hypertension of pregnancy (n = 69), preeclampsia (n = 130), chronic hypertension (n = 23), chronic hypertension with superimposed preeclampsia (n = 29), and normal (n = 93). We compared the mean uric acid concentration for each group with use of a one-way analysis of variance and Scheffe's post hoc test and calculated the sensitivities and specificities in diagnosing preeclampsia as well as the likelihood ratios for serum uric acid values of 5.5, 6.0, and 6.5 mg/dl. We also examined the correlation between serum uric acid levels and several clinical outcome measures in women with hypertensive diseases of pregnancy. RESULTS: The mean serum uric acid values for women with preeclampsia (6.2 +/- 1.4 mg/dl) and transient hypertension (5.6 +/- 1.7 mg/dl) were significantly higher than those of controls (4.3 +/- 0.8 mg/dl, p < 0.05). The difference in mean serum uric acid values between women with chronic hypertension (4.9 +/- 1.0 mg/dl) and superimposed preeclampsia (5.8 +/- 1.4 mg/dl) were not statistically significant. The likelihood ratio of having preeclampsia with a serum uric acid value of 5.5 mg/dl was 1.41 in gestational hypertension of pregnancy and 2.5 in chronic hypertension. With use of a receiver-operator characteristic curve, we were unable to identify a serum uric acid value that could be used to differentiate various hypertensive diseases of pregnancy. There was a weak correlation between serum uric acid values and several clinical outcome measures of preeclampsia (r = 0.06 to 0.26). CONCLUSION: Although mean serum uric acid values are elevated in women with preeclampsia, the clinical utility of serum uric acid values in differentiating various hypertensive diseases of pregnancy appears to be limited. In the setting of chronic hypertension, however, a serum uric acid level of > or = 5.5 mg/dl could identify women with an increased likelihood of having superimposed preeclampsia.     

Finite element incremental contact analysis with various frictional conditions

The use of contacting components such as gear teeth in mesh and shrink-fitted shafts is very common in engineering practice. This paper deals with the development of a theoretical method which gives a solution for non-linear contact problems with irreversibility resulting from stick-slip phenomenon. The method is based on the finite element method and load incremental theory. The geometrical and the statical boundary conditions on contact surfaces are treated as additional conditions being independent of stiffness equations. As a result, the algorithm of calculation is simplified and only a part of the simultaneous equations related to the contact surfaces is required to be solved instead of the overall stiffness equations at each step. Furthermore, the magnitude of load causing a change in a contact condition of one contact nodepair is taken as a load increment, in analogy with the incremental iterative procedure for elastic-plastic problems. Therefore, the method provides a general and efficient method for analysis and design of such problems. As illustrative examples, the stick-slip behaviour of turbo-alternator end-bells and other problems are discussed. The calculated results show a reasonable agreement with experimental data and other solutions.     

Wind-flow measurement over the Subaru Telescope

Wind flows over the 8.2-m Subaru Telescope at Mauna Kea in Hawaii were analyzed with a correlation method. Three or four wind flows were detected from our measurements. Spatial and temporal resolution of the wind-flow analysis across the 8.2 m pupil were investigated experimentally. A three-dimensional spatiotemporal-frequency analysis was also applied to the wind-flow data.     

Optimally designing caches to reduce P2P traffic

Traffic caused by P2P services dominates a large part of traffic on the Internet and imposes significant loads on the Internet, so reducing P2P traffic within networks is an important issue for ISPs. In particular, a huge amount of traffic is transferred within backbone networks; therefore reducing P2P traffic is important for transit ISPs to improve the efficiency of network resource usage and reduce network capital cost. To reduce P2P traffic, it is effective for ISPs to implement cache devices at some router ports and reduce the hop length of P2P flows by delivering the required content from caches. However, the design problem of cache locations and capacities has not been well investigated, although the effect of caches strongly depends on the cache locations and capacities. We propose an optimum design method of cache capacity and location for minimizing the total amount of P2P traffic based on dynamic programming, assuming that transit ISPs provide caches at transit links to access ISP networks. We apply the proposed design method to 31 actual ISP backbone networks and investigate the main factors determining cache efficiency. We also analyze the property of network structure in which deploying caches are effective in reducing P2P traffic for transit ISPs. We show that transit ISPs can reduce the P2P traffic within their networks by about 50-85% by optimally designing caches at the transit links to the lower networks.     

Managing a Very Connected World: A Report on APNOMS2015

This article presents a report on APNOMS2015, which was held August 19–21, 2015 in Busan, Korea. The theme of APNOMS2015 was “Managing a Very Connected World.”     

Cranial Base Synchondrosis Lacks PTHrP-Expressing Column-Forming Chondrocytes

The cranial base contains a special type of growth plate termed the synchondrosis, which functions as the growth center of the skull. The synchondrosis is composed of bidirectional opposite-facing layers of resting, proliferating, and hypertrophic chondrocytes, and lacks the secondary ossification center. In long bones, the resting zone of the epiphyseal growth plate houses a population of parathyroid hormone-related protein (PTHrP)-expressing chondrocytes that contribute to the formation of columnar chondrocytes. Whether PTHrP⁺ chondrocytes in the synchondrosis possess similar functions remains undefined. Using Pthrp-mCherry knock-in mice, we found that PTHrP⁺ chondrocytes predominantly occupied the lateral wedge-shaped area of the synchondrosis, unlike those in the femoral growth plate that reside in the resting zone within the epiphysis. In vivo cell-lineage analyses using a tamoxifen-inducible Pthrp-creER line revealed that PTHrP⁺ chondrocytes failed to establish columnar chondrocytes in the synchondrosis. Therefore, PTHrP⁺ chondrocytes in the synchondrosis do not possess column-forming capabilities, unlike those in the resting zone of the long bone growth plate. These findings support the importance of the secondary ossification center within the long bone epiphysis in establishing the stem cell niche for PTHrP⁺ chondrocytes, the absence of which may explain the lack of column-forming capabilities of PTHrP⁺ chondrocytes in the cranial base synchondrosis.     

Analysis of PD-generated SF/sub 6/ decomposition gases adsorbed on carbon nanotubes

Chemical byproducts analysis has been recognized as a powerful diagnosis method for SF₆ gas-insulated switchgear (GIS). The authors have previously demonstrated that a carbon nanotube (CNT) gas sensor could detect partial discharge (PD) generated in SF₆ gas. However, PD-generated decomposition gas species, which were responsible for the CNT gas sensor response, have not been identified yet. In this paper, two kinds of experiments were conducted in order to identify the responsible decomposition gas species. At first, the decomposition gas molecules adsorbed on CNTs were analyzed by Fourier transformation infrared (FTIR) spectroscopy. FTIR absorbance was observed around 735 cm^-1 after CNTs were exposed to PD generated in SF₆. In the second experiment, the CNT gas sensor responses to typical SF₆ decomposition products (HF and SF₄) were examined. The CNT gas sensor responded to these gases in the same way as to PD generated in SF₆. SF₄ response was larger than HF response. Based on these results, SF ₄ and SOF₂ emerged as candidates for the responsible decomposition gases. Electrochemical interactions between adsorbed gas molecules and CNT were discussed based on theoretical predictions of molecular orbital calculations. The calculation results suggested that both of SOF₂ and SF₄ could increase the CNT gas sensor conductance     

Posture Control for Personal Mobility Robot Using Feedback Compensation with Unstable Pole

This paper presents a novel posture control approach using feedback compensation with an unstable pole. For a narrow and small personal mobility robot (PMR), this is needed in order to control its posture for achieving quick turning and high acceleration. However, in the conventional control approach that uses the posture angle as a controlled variable, the zero moment point (ZMP) does not settle to the desired point in the following cases: an unknown disturbance force given to the PMR, a fluctuation in the center of gravity of the PMR, and a change in the conditions between the tires and the road surface. In this paper, a novel control method using feedback compensation with an unstable pole is proposed to achieve the desired ZMP in the steady state. The proposed controller changes the control input for the actuator of posture control to zero in order to achieve the desired posture angle. The effectiveness of the proposed approach is verified through experiments using a prototype of the PMR.