Electron microscopy and phase analysis of fly ash from pressurized fluidized bed combustion

The characterization of the typical fly ashes from pressurized fluidized bed combustion system (PFBC) in Japan and Europe was carried out by electron microscopy and phase analysis using energy-dispersive X-ray spectroscopy (EDX). The purity of limestone as in-bed sulfur removal sorbent influences the desulfurization reaction. The high-purity limestone yielded both hydroxyl ellestadite and anhydrite in Japanese PFBC ashes, while dolomite-rich limestone yielded anhydrite in European PFBC ashes. When the high-purity limestone was used, hydroxyl ellestadite particles were observed as the independent particles or the rim around limestone particles. The Al₂O₃ content in the glassy phase was inversely proportional to the CaO content in the glassy phase, suggesting that the glassy phases were formed from metakaoline and calcite as end members. Since hydroxyl ellestadite, glassy phase and metakaoline are reactive under hydrothermal conditions, PFBC ashes are expected to be used as raw materials for autoclaved products.     

CO2 laser beam welding of 6061-T6 aluminum alloy thin plate

Laser beam welding is an attractive welding process for age-hardened aluminum alloys, because its low heat input minimizes the width of weld fusion and heat-affected zones (HAZs). In the present work, 1-mm-thick age-hardened Al-Mg-Si alloy, 6061-T6, plates were welded with full penetration using a 2.5-kW CO₂ laser. Fractions of porosity in the fusion zones were less than 0.05 pct in bead-on-plate welding and less than 0.2 pct in butt welding with polishing the groove surface before welding. The width of a softened region in the-laser beam welds was less than 1/4 times that of a tungsten inert gas (TIG) weld. The softened region is caused by reversion of strengthening β″ (Mg₂Si) precipitates due to weld heat input. The hardness values of the softened region in the laser beam welds were almost fully recovered to that of the base metal after an artificial aging treatment at 448 K for 28.8 ks without solution annealing, whereas those in the TIG weld were not recovered in a partly reverted region. Both the bead-on-plate weld and the butt weld after the postweld artificial aging treatment had almost equivalent tensile strengths to that of the base plate.     

Aluminum-doped zinc oxide electrode for robust (Pb,La)(Zr,Ti)O3 capacitors: effect of oxide insulator encapsulation and oxide buffer layer

Conductive aluminum-doped zinc oxide (AZO) was deposited by pulsed laser deposition as top electrodes for chemical solution deposition derived lanthanum modified lead zirconate titanate (PLZT) capacitors. Compared with PLZT capacitors with Pt top electrodes (Pt/PLZT/Pt), PLZT capacitors with AZO as top electrodes (AZO/PLZT/Pt) showed improved fatigue endurance after cycles of 200 kV/cm (10 V) were applied with a 100 μs pulse width at 1 ms intervals. By using a combination of AZO as the top electrode and as a thin buffer layer (10 nm) under PLZT thin films (AZO/PLZT/AZO/Pt), fatigue behavior was also improved compared with the case without an AZO buffer layer. The addition of either an Al₂O₃ or HfO₂ encapsulation layer increased the remnant polarization ratio of PLZT capacitors (after annealing at 200 °C, 1 Torr, 3 % hydrogen atmosphere) to 0.80 and 0.57, respectively, comparing with 0.52 without an encapsulation layer.     

Synthesis of spherical LiMn2O4 microparticles by a combination of spray pyrolysis and drying method

Lithium manganese oxide (LiMn₂O₄) has been synthesized by a spray pyrolysis method from the precursor solution; LiNO₃ and Mn(NO₃)₂·6H₂O were stoichiometrically dissolved into distilled water. The synthesized LiMn₂O₄ particles exhibited a pure cubic spinel structure in the X-ray diffraction (XRD) patterns, however they were spherical hollow spheres for various concentrations of precursor solution. Thus, the as-prepared LiMn₂O₄ particles were then ground in a mortar and dispersed into distilled water. To make a well dispersed slurry solution, a dispersion agent was also added into the slurry solution. The LiMn₂O₄ microparticles with a spherical nanostructure were finally prepared by a spray drying method from the slurry solution. The tap density of the LiMn₂O₄ microparticle prepared by a combination of spray pyrolysis and drying method was larger than that by a conventional spray pyrolysis method.The as-prepared samples were sintered at 750 °C for 1 h in air and used as cathode active materials for lithium batteries. Test experiments in the electrochemical cell Li|1 M LiClO₄ in EC:DEC = 1:1|LiMn₂O₄ demonstrate that the sample prepared by the present method is a promising cathode active material for 4 V lithium-ion batteries at high-charge-discharge and elevated temperature operation. The LiMn₂O₄ compounds by the combination of spray pyrolysis and drying method are superior to that by the conventional spray pyrolysis method in terms of electrochemical characteristics and tap density.     

Near-infrared reflection from periodically aluminium-doped zinc oxide thin films

Multilayers of aluminium-doped zinc oxide (Al:ZnO) as a heat-reflection material were prepared by a reactive sputtering method with intermittent Al doping or Al content modulation. A drop in the refractive indices n around the plasma wavelength λ_p of 1456 nm for the optimally-doped Al:ZnO layers formed the periodic distribution of n in the multilayers. The periodic n provided selective reflection of approximately 60% under λ_p and shielded near-infrared solar radiation containing high energy, which was impossible to be reflected from the Al:ZnO monolayer. The selective reflection was accompanied by infrared reflection above λ_p, low emissivity and no subsequent visible reflection, which allowed the multilayers to achieve compatibility between the solar heat gain coefficient of 0.6 and the visible transmittance of nearly 80%.     

Eviprostat Activates cAMP Signaling Pathway and Suppresses Bladder Smooth Muscle Cell Proliferation

Eviprostat is a popular phytotherapeutic agent for the treatment of lower urinary tract symptoms (LUTS). At present, the signaling mechanisms underlying its therapeutic effects are still poorly understood. Given that cAMP has been reported to suppress cell hyperplasia and hypertrophy in various pathological situations, we asked whether the effect of Eviprostat could be ascribed to the activation of the cAMP signaling pathway. In the study, exposure of cAMP response element (CRE)-secreted alkaline phosphatase (SEAP) (CRE-SEAP)-reporter cells to Eviprostat elevated SEAP secretion, which was associated with an increased phosphorylation of vasodilator-stimulated phosphoprotein (VASP) and cAMP-response element-binding protein (CREB), as well as enhanced expression of CRE-regulated protein connexin43, indicating an activation of the cAMP signaling pathway. Consistent with these observations, Eviprostat-induced expression of Cx43 was abolished in the presence of adenylyl cyclase inhibitor SQ22536 or PKA inhibitor H89, whereas it was mimicked by adenylyl cyclase activator, forskolin. Further analysis demonstrated that Eviprostat significantly potentiated the effect of phosphodiesterase 3 (PDE3) inhibitor, but not that of PDE4 inhibitor, on CRE activation. Moreover, Eviprostat suppressed PDGF-induced activation of ERK and Akt and inhibited cell proliferation and hillock formation in both mesangial cells and bladder smooth muscle cells. Collectively, activation of the cAMP signaling pathway could be an important mechanism by which Eviprostat exerts its therapeutic effects for LUTS.     

Mechanical properties of a medical β-type titanium alloy with specific microstructural evolution through high-pressure torsion

The effect of high-pressure torsion (HPT) processing on the microstructure and mechanical biocompatibility includes Young's modulus, tensile strength, ductility, fatigue life, fretting fatigue, wear properties and other functionalities such as super elasticity and shape memory effect, etc. at levels suitable for structural biomaterials used in implants that replace hard tissue in the broad sense (Sumitomo et al., 2008 [4]). In particular, in this study, the mechanical biocompatibility implies a combination of great hardness and high strength with an adequate ductility while keeping low Young's modulus of a novel Ti–29Nb–13Ta–4.6Zr (TNTZ) for biomedical applications at rotation numbers (N) ranging from 1 to 60 under a pressure of 1.25 GPa at room temperature was systematically investigated in order to increase its mechanical strength with maintaining low Young's modulus and an adequate ductility.TNTZ subjected to HPT processing (TNTZ_HPT) at low N exhibits a heterogeneous microstructure in micro-scale and nano-scale consisting of a matrix and a non-etched band, which has nanosized equiaxed and elongated single β grains, along its cross section. The grains exhibit high dislocation densities, consequently non-equilibrium grain boundaries, and non-uniform subgrains distorted by severe deformation. At high N which is N > 20, TNTZ_HPT has a more homogeneous microstructure in nano-scale with increasing equivalent strain, ε_eq. Therefore, TNTZ_HPT at high N exhibits a more homogenous hardness distribution. The tensile strength and 0.2% proof stress of TNTZ_HPT increase significantly with N over the range of 0 ≤ N ≤ 5, and then become saturated at around 1100 MPa and 800 MPa at N ≥ 10. However, the ductility of TNTZ_HPT shows a reverse trend and a low-level elongation, at around 7%. And, Young's modulus of TNTZ_HPT decreases slightly to 60 GPa with increasing N and then becomes saturated at N ≥ 10. These obtained results confirm that the mechanical strength of TNTZ can be improved while maintaining a low Young's modulus in single β grain structures through severe plastic deformation.