Characterization of electrical properties and photosensitivity of SnS thin films prepared by the electrochemical deposition method

Using the electrochemical deposition (ECD) method, we prepared tin sulfide thin films, which are suitable for the absorption layer in solar cells because of its bandgap energy (1 eV). We first optimized pulse-form biasing for ECD by characterizing deposited samples with scanning electron microscope, Auger electron spectroscopy and X-ray diffraction measurements. Then, we investigated the electrical properties of deposited SnS thin films and the properties of contacts with several different metals. Furthermore, we observed the photoconductivity of the films by means of photoelectrochemical measurements. From these results, we confirmed that the SnS thin films show p-type conduction.     

Re-evaluation of the phase relationship between plutonium and zirconium dioxides

The phase relationship between ZrO₂ and PuO₂ was examined in a low PuO₂ content region, from 3.1 to 11.2 mol% PuO₂, at temperatures between 1273 K and 1473 K, by high temperature X-ray diffractometry. The measurements were carried out in air. At 1273 K, the samples in this composition range consisted of two phases, monoclinic and cubic. Another phase, tetragonal, was observed at 1373 K. The low temperature monoclinic phase disappeared at 1473 K. It was confirmed that the monoclinic phase disappears around 1463 K; the disappearance temperature does not depend on the composition of the sample. It was, thus, inferred that there should be a eutectoid line in the phase diagram. Though the eutectoid point is not clear, the PuO₂ content at the point should be less than 3.1 mol%.     

Oxygen potential measurements of Am0.5Pu0.5O2−x by EMF method

The dependence of the oxygen potentials on oxygen non-stoichiometry and temperature of Am_0.5Pu_0.5O_2−x has been obtained by the electromotive force (EMF) method with the cell: (Pt) air |Zr(Ca)O_2−x| Am_0.5Pu_0.5O_2−x (Pt). The x value of Am_0.5Pu_0.5O_2−x was changed at 1333 K over 0.02 < x ? 0.25 by the coulomb titration method. The temperature dependence of the oxygen potential was also measured over the range of 1173-1333 K. It was found that the oxygen potential decreased from −80 to −360 kJ mol⁻¹ with increasing x from 0.021 to 0.22 at 1333 K and that it remained almost constant at −360 kJmol⁻¹ around x = 0.23. It was concluded that Am_0.5Pu_0.5O_2−x should be composed of the single fluorite-type phase over 0.02 < x ? 0.22 and the mixed phases of fluorite-type and (Am, Pu)₉O₁₆ at around x = 0.23.     

Overexpression and purification of Aspergillus aculeatus beta-mannosidase and analysis of the integrated gene in Aspergillus oryzae

An expression plasmid for the manB gene encoding Aspergillus aculeatus beta-d-mannosidase (MANB) was constructed by using an expression vector carrying an improved promoter. After transformation of A. oryzae by the plasmid, several transformants formed colonies emitting fluorescence on a plate containing 4-methylumbelliferyl beta-d-mannopyranoside (MU-Man) under UV-irradiation. The transformant that displayed the strongest fluorescence, named A. oryzae BMN1, produced about 270 mg MANB/l in liquid culture. Recombinant MANB overproduced in BMN1 was purified by two steps of column chromatography to a single protein band on SDS-polyacrylamide gel electrophoresis and had a molecular weight of 130,000. Analyses by Southern blotting and genomic PCR demonstrated that a single copy of the plasmid was integrated into the chromosome by recombination at the niaD locus.     

Expression of a gene encoding chitinase (pCA 8 ORF) from Aeromonas sp. no. 10S-24 in Escherichia coli and enzyme characterization

A gene encoding chitinase from Aeromonas sp. no. 10S-24 was expressed using pTrc99A in Escherichia coli JM 105 which yielded a 5-fold higher activity than when pUC19 was used. Three different truncated enzymes (SA-1, SA-2 and SA-3) were obtained after purification. Their isoelectric points were 7.0, 6.9, and 6.7, respectively. The enzymes showed two optimum pHs, 4.0 and 7.0, when incubated with ethylene glycol chitin as the substrate, and were stable over a wide pH range (3.0-9.0). The optimum temperature was 60 degrees C and the enzymes were stable up to 50 degrees C. The chitinases exhibited wide substrate specificities for chitin-related compounds.     

Effects of dissolved carbonate on arsenate adsorption and surface speciation at the hematite--water interface

Effects of dissolved carbonate on arsenate [As(V)] reactivity and surface speciation at the hematite-water interface were studied as a function of pH and two different partial pressures of carbon dioxide gas [P(CO2) = 10(-3.5) atm and approximately 0; CO2-free argon (Ar)] using adsorption kinetics, pseudo-equilibrium adsorption/titration experiments, extended X-ray absorption fine structure spectroscopic (EXAFS) analyses, and surface complexation modeling. Different adsorbed carbonate concentrations, due to the two different atmospheric systems, resulted in an enhanced and/or suppressed extent of As(V) adsorption. As(V) adsorption kinetics [4 g L(-1), [As(V)]0 = 1.5 mM and I = 0.01 M NaCl] showed carbonate-enhanced As(V) uptake in the air-equilibrated systems at pH 4 and 6 and at pH 8 after 3 h of reaction. Suppressed As(V) adsorption was observed in the air-equilibrated system in the early stages of the reaction at pH 8. In the pseudo-equilibrium adsorption experiments [1 g L(-1), [As(V)]0 = 0.5 mM and I = 0.01 M NaCI], in which each pH value was held constant by a pH-stat apparatus, effects of dissolved carbonate on As(V) uptake were almost negligible at equilibrium, but titrant (0.1 M HCl) consumption was greater in the air-equilibrated systems (P(CO2) = 10(-3.5) atm) than in the CO2-free argon system at pH 4-7.75. The EXAFS analyses indicated that As(V) tetrahedral molecules were coordinated on iron octahedral via bidentate mononuclear ( 2.8 A) and bidentate binuclear (approximately equal to 3.3 A) bonding at pH 4.5-8 and loading levels of 0.46-3.10 microM m(-2). Using the results of the pseudo-equilibrium adsorption data and the XAS analyses, the pH-dependent As(V) adsorption under the P(CO2) = 10(-3.5) atm and the CO2-free argon system was modeled using surface complexation modeling, and the results are consistent with the formation of nonprotonated bidentate surface species at the hematite surfaces. The results also suggest that the acid titrant consumption was strongly affected by changes to electrical double-layer potentials caused by the adsorption of carbonate in the air-equilibrated system. Overall results suggest that the effects of dissolved carbonate on As(V) adsorption were influenced by the reaction conditions [e.g., available surface sites, initial As(V) concentrations, and reaction times]. Quantifying the effects of adsorbed carbonate may be important in predicting As(V) transport processes in groundwater, where iron oxide-coated aquifer materials are exposed to seasonally fluctuating partial pressures of CO2(g).     

Polymorphisms of dopamine receptor and transporter genes and Parkinson's disease

Disturbances of the dopamine system are involved in the pathogenesis of idiopathic Parkinson's disease (PD). Although genetic factors may play a role in the etiology of PD, there is little direct evidence implicating a specific gene. We conducted a study to test the hypothesis that allelic variations of the dopamine receptors (D2, D3, D4) and the dopamine transporter (DAT) contribute to the susceptibility to PD. Association analyses of 70 Japanese PD patients and the same number of age-matched controls did not reveal any association between alleles of the D2, D3 or D4 receptor genes or the DAT gene and PD. Thus, our results suggest that factor(s) other than allelic variations of these key proteins in the dopamine system contribute to the susceptibility to PD.     

A framework for capacity planning and machine configuration in flexible assembly systems

We consider the problem of simultaneously determining the number of machines (and/or workers), the assignment of tasks (and related tools and components) to these machines, and the number of jobs circulating in a flexible assembly system (FAS), to satisfy steady-state throughput requirements for a family of similar products at minimum cost. We focus on situations where there are precedence relations among the various tasks, as is common in assembly systems. We present a framework for solving this problem based on a heuristic decomposition approach which involves the solution of only a few types of sub-problems. We demonstrate the efficiency and effectiveness of the overall procedure using a number of example problems.