Effects of porosity,dry unit weight,cement content and void/cement ratio on unconfined compressive strength of roof tile waste-silty soil mixtures

One of the conventional ways to improve the mechanical behavior of soils is to mix them with cementing agents such as cement, lime and fly ash. Recently, introduction to alternative materials or sub-products that can be adopted to improve the soil strength is of paramount importance. Therefore, the present study aims to investigate the effects of porosity (η), dry unit weight (γ_d) of molding, cement content (C) and porosity/volumetric cement content ratio (η/C_iv) or void/cement ratio on the unconfined compressive strength (q_u or UCS) of silty soil–roof tile waste (RT) mixtures. Soil samples are molded into four different dry unit weights (i.e. 13 kN/m³, 13.67 kN/m³, 14.33 kN/m³ and 15 kN/m³) using 3%, 6% and 9% cement and 5%, 15% and 30% RT. The results show that with the addition of cement, the strength of the RT–soil mixtures increases in a linear manner. On the other hand, the addition of RT decreases q_u of the samples at a constant percentage of cement, and the decrease in porosity can increase q_u. A dosage equation is derived from the experimental data using the porosity/volumetric cement content ratio (η/C_iv) where the control variables are the moisture content, crushed tile content, cement content and porosity.     

Effects of Sedentarism and Treadmill Training in Mechanical Properties of Muscles of Ovariectomized Rats with High-Fat Diet

The aim of this study is to evaluate the ability of physical training in the maintenance of muscle strength in rats with HFD （high-fat diet） after OVX （ovariectomy）. Eighty Wistar rats are at eight weeks of age and weight 200 g which divided into 8 groups （n = 10） and treated for 12 weeks： GA： OVX ＋ ND （normal diet）, GB： OVX ＋ ND ＋ training, GC： sham ＋ ND, GD： sham ＋ ND ＋ training, GE： OVX ＋ HFD, GF： OVX ＋ HFD ＋ training, GG： sham ＋ HFD and GH： sham ＋ HFD ＋ training. HFD consists of standard ration for rats with addition of 30% lipids. In training groups, physical training five training/week was conducted on a treadmill with adaptation period of three weeks up to 18 m/s for one hour, training were performed for 12 weeks. The sedentary animals remained in individual box. To analyze the effects of training and diet, tensile strength tests of the gastrocnemius muscles were conducted： the speed of 0.1 mm/min. Analysis of variance was performed to compare groups. The mean （SD） obtained for the maximum load （N） were： GA 57.77 （6.89）, GB 62.74 （5.07）, GC 49.45 （6.06）, GD 59.42 （5.26） and GE 55.58 （4.72）, GF 62.50 （4.56）, GG 58.35 （4.54） and GH 56.67 （5.87）, respectively. There were no differences for maximum load between surgeries （p = 0.004） and between treatments （p = 0.000）. Differences were found also for the relationship surgery diet treatment （p = 0.007）. For the variable stiffness （N/mm）, there were not statistically significant differences： GA 5.03 （0.72）, GB 5.08 （1.09）, GC 5.17 （0.53）, GD 5.35 （0.80）, GE 5.52 （1.20）, GF 5.36 （1.07）, GG 4.83 （1.03） and GH 5.40 （0.73）. For the toughness （N/mm）, there were differences between treatments （p = 0.010） and the ratio diet treatment （p = 0.024）： GA 455.00 （107.21）, GB 541.96 （126.80）, GC 394.97 （84.67）, GD 566.90 （157.07）; GE 424.63 （113.03）, GF 478.07 （106.03）; GG 517.44 （98.65?     

Ultrastructural and immunohistochemical study of the effect of sodium alendronate in the progression of experimental periodontitis in rats

The aim of the present research was to investigate the ultrastructural aspects and the immunoexpression of receptor activator of NFκB ligand (RANKL) and osteoprotegerin (OPG) on experimental periodontal disease of alendronate (ALN)‐treated rats. Male Wistar rats received daily injections of 2.5 mg/kg body weight of ALN during 7 days previously and 7, 14, and 21 days after the insertion of a 4.0 silk suture into the gingival sulcus around the right upper second molar. Specimens were fixed in 0.1% glutaraldehyde + 4% formaldehyde under microwave irradiation, decalcified in 4.13% EDTA and paraffin embedded for TRAP histochemistry and immunohistochemistry for RANKL and OPG, or embedded in Spurr epoxy resin for TEM analysis. ALN reduced the activity of osteoclasts and significantly decreased the resorption of the alveolar crest. In the control group the alveolar crest appeared resorbed by TRAP‐positive osteoclasts, which presented ultrastructural features of activated cells. The immunoexpression of RANKL was not inhibited by the drug; however, the expression of OPG was increased in the treated animals. The alveolar crest of ALN‐treated specimens at 21 days showed signs of osteonecrosis, like empty osteocyte lacunae, the exposed bone regions and bacterial infection. The results showed that ALN treatment in individuals with periodontal disease represents a risk of osteonecrosis because of the reduced activity of osteoclasts resultant of the increased immunoexpression of OPG. Microsc. Res. Tech. 77:902–909, 2014. © 2014 Wiley Periodicals, Inc.     

Salivary Glands after Prolonged Aluminum Exposure: Proteomic Approach Underlying Biochemical and Morphological Impairments in Rats

Aluminum (Al) is one of the most abundant elements on Earth, and its high extraction rate and industrial use make human exposure very common. As Al may be a human toxicant, it is important to investigate the effects of Al exposure, mainly at low doses and for prolonged periods, by simulating human exposure. This work aimed to study the effects of low-dose exposure to chloride aluminum (AlCl₃) on the oxidative biochemistry, proteomic profile, and morphology of the major salivary glands. Wistar male rats were exposed to 8.3 mg/kg/day of AlCl₃ via intragastric gavage for 60 days. Then, the parotid and submandibular glands were subjected to biochemical assays, proteomic evaluation, and histological analysis. Al caused oxidative imbalance in both salivary glands. Dysregulation of protein expression, mainly of those related to cytoarchitecture, energy metabolism and glandular function, was detected in both salivary glands. Al also promoted histological alterations, such as acinar atrophy and an increase in parenchymal tissue. Prolonged exposure to Al, even at low doses, was able to modulate molecular alterations associated with morphological impairments in the salivary glands of rats. From this perspective, prolonged Al exposure may be a risk to exposed populations and their oral health.     

Comparative Analysis of Ozone and Ultrasound Effect on the Elimination of Giardia spp. Cysts from Wastewater

Giardia spp. is a flagellate protozoan that presents two evolution forms, cysts and trophozoites. Cysts are resistant to chlorine, the most employed disinfectant agent in the treatment of water. For this reason, new techniques for the disinfection of waters that contain this parasite are necessary. This work evaluated the efficiency of the disinfection by ozone and ultrasound individually and simultaneously upon wastewater. The data obtained showed that after application, ozone, ultrasound, and combined techniques induced a significant elimination of Giardia spp. cysts. Furthermore, this effect was more accentuated when the two techniques were applied simultaneously.     

Comparison of vacuum impregnation and soaking techniques for addition of the probiotic Lactobacillus acidophilus to minimally processed melon

This study aimed to evaluate the vacuum impregnation (VI) and soaking methods in the addition of Lactobacillus acidophilusLA‐3 to minimally processed melon (MPM). The melons were washed, sanitised in chlorine solution (200 mg L^?1), peeled and cutted into cubes. Lactobacillus acidophilusLA‐3 (1.4 × 10¹⁰ CFU g^?1) were added to the MPM through both techniques. The L. acidophilusLA‐3 count in MPM was similar to those commonly found in dairy products having probiotic claim, but VI was more efficient than soaking in maintaining the viability (8.61 and 7.98 Log CFU g^?1, respectively). The pH, acidity and soluble solids were not affected by probiotic culture and the incorporation technique; however, the VI affected the firmness of fruit. The MPM was within Brazilian standards for their microbiological characteristics. MPM may be used as a carrier of probiotic bacteria, being one more alternative for individuals who consume probiotic products.     

Forms of reasoning used by prospective physical sciences teachers when explaining and predicting natural phenomena: The case of air pressure

Abstract

The co‐ordination between theory and evidence is an outstanding characteristic of scientific thinking. Research indicates that students often have difficulty in explaining natural phenomena because they use their own theories to explain phenomena or they are unable to build a bridge between theory and evidence. Science teachers must teach students to collect and select evidence and to use theory to explain it. The objective of this study was to investigate the forms of reasoning used by prospective physical sciences teachers when they build up explanations and make predictions about natural phenomena. Thirty‐eight prospective teachers answered a questionnaire structured around three problems focusing on phenomena that can be explained through air‐pressure variation. The results seem to indicate a variation in the forms of reasoning used, depending on the problem and the type of request. The number of prospective teachers who consistently use a certain form of reasoning is higher within problems than across problems.     

Effect of cooling rate on Ti–Cu eutectoid alloy microstructure

Titanium alloys present a combination of properties that makes them suitable materials for various medical applications, and there is special interest in Ti–Cu alloys for the fabrication of dental prostheses. The addition of Cu to Ti lowers the melting point of the alloy, as well as leading to the development of desirable mechanical properties. In this study a eutectoid alloy was prepared and heat treated, then cooled at various cooling rates. The eutectoid structure (α + Ti₂Cu) was observed for all cooling rates used, and evidence of α′ martensite was found for cooling rate higher than 9 °C s^–1. Lower cooling rates resulted in higher modulus values. This was attributed to the volume fraction of the α and Ti₂Cu phases. Higher cooling rates produced structures with lower modulus values and greater hardness, a result attributed mainly to the development of a martensitic structure.     

Radar Altimetry Aids Managing Gauge Networks

The hydrological observation network in the Amazon basin is made of conventional rainfall and water level stations presently maintained by the Agência Nacional de Águas (ANA), the National Agency for Waters. The water level network has long been plagued by difficulties associated with spatial coverage, timely delivery and data errors. Satellite observations are important means for providing hydrologic data with acceptable spatial and temporal resolution, and radar altimeters embarked onboard successive satellites since the early 1970s collect measurements of water level over rivers in a well-defined geodetic reference frame and can be used to address some of these problems. Nowadays, satellite altimetry can be used to collect the time variations of the water levels over many rivers throughout the word, as long as the reach are several hundred meters wide. This ability is particularly interesting in ungauge basins but it can also be used as an independent source of information to cross-check existing gauge series. In the present study, we focus on examples from the Amazon basin where radar altimetry has been used to provide an independent dataset that can be used to support the management of hydrological observation networks by including new data together with conventional field data,     

Tritrichomonas foetus adhere to superhydrophilic vertically aligned multi-walled carbon nanotube surface

For the first time, we show that Tritrichomonas foetus can adhere on superhydrophilic vertically aligned carbon nanotubes (VACNT) films. Scanning electron microscopy shows an unusual adhesion with a higher membrane filopodium projection in all directions, directly attached to superhydrophilic VACNT tips.