Online collaboration: Collaborative behavior patterns and factors affecting globally distributed team performance

Studying the collaborative behavior of online learning teams and how this behavior is related to communication mode and task type is a complex process. Research about small group learning suggests that a higher percentage of social interactions occur in synchronous rather than asynchronous mode, and that students spend more time in task-oriented interaction in asynchronous discussions than in synchronous mode. This study analyzed the collaborative interaction patterns of global software development learning teams composed of students from Turkey, US, and Panama. Data collected from students’ chat histories and forum discussions from three global software development projects were collected and compared. Both qualitative and quantitative analysis methods were used to determine the differences between a group’s communication patterns in asynchronous versus synchronous communication mode. K-means clustering with the Ward method was used to investigate the patterns of behaviors in distributed teams. The results show that communication patterns are related to communication mode, the nature of the task, and the experience level of the leader. The paper also includes recommendations for building effective online collaborative teams and describes future research possibilities.     

Epithelial Layer Estimation Using Curvatures and Textural Features for Dysplastic Tissue Detection

Boundary effect in digital pathology is a phenomenon where the tissue shapes of biopsy samples get distorted during the sampling process. The morphological pattern of an epithelial layer is greatly affected. Theoretically, the shape deformation model can normalise the distortions, but it needs a 2D image. Curvatures theory, on the other hand, is not yet tested on digital pathology images. Therefore, this work proposed a curvature detection to reduce the boundary effects and estimates the epithelial layer. The boundary effect on the tissue surfaces is normalised using the frequency of a curve deviates from being a straight line. The epithelial layer’s depth is estimated from the tissue edges and the connected nucleolus only. Then, the textural and spatial features along the estimated layer are used for dysplastic tissue detection. The proposed method achieved better performance compared to the whole tissue regions in terms of detecting dysplastic tissue. The result shows a leap of kappa points from fair to a substantial agreement with the expert’s ground truth classification. The improved results demonstrate that curvatures have been effective in reducing the boundary effects on the epithelial layer of tissue. Thus, quantifying and classifying the morphological patterns for dysplasia can be automated. The textural and spatial features on the detected epithelial layer can capture the changes in tissue.     

Using tchebichef moment for fast and efficient image compression

Orthogonal moment is known as better moment functions compared to the non-orthogonal moment. Among all the orthogonal moments, Tchebichef Moment appear to be the most recent moment functions that still attract the interest among the computer vision researchers. This paper proposes a novel approach based on discrete orthogonal Tchebichef Moment for an efficient image compression. The image compression is useful in many applications especially related to images that are needed to be seen in small devices such as in mobile phone. Meanwhile, the method incorporates simplified mathematical framework techniques using matrices, as well as a block-wise reconstruction technique to eliminate possible occurrences of numerical instabilities at higher moment orders. In addition, a comparison between Tchebichef Moment compression and JPEG compression is conducted. The result shows significant advantages for Tchebichef Moment in terms of its image quality and compression rate. Tchebichef moment provides a more compact support to the image via sub-block reconstruction for compression. Tchebichef Moment Compression is able to perform potentially better for a broader domain on real digital images and graphically generated images.     

Corrosion of Steel Reinforcement in Carbon Fiber-Reinforced Polymer Wrapped Concrete Cylinders

The rehabilitation, repair, and strengthening of concrete structures has increased worldwide with a growing number of systems employing externally applied fiber-reinforced polymer (FRP) composites. However, the service life and effectiveness of FRP repair and strengthening techniques when applied to concrete in corrosive marine environments is still not well understood. This paper presents the results of an experimental study on the corrosion performance of embedded steel reinforcement in cylindrical reinforced concrete specimens with 13 different surface treatment options. Samples were subjected to an impressed current and a high salinity solution. Test variables included the type of epoxy, wrap fiber orientation, and the number of wrap layers. Samples were evaluated for corrosion activity by monitoring corrosion potentials and impressed current flow levels, and by examining reinforcement mass loss and concrete chloride content among samples. Test results indicated that FRP wrapped specimens had prolonged test life, decreased reinforcement mass loss, and reduced concrete chloride content. The performance of wrapped specimens was superior to that of either control samples or those coated only with epoxy. Epoxy type had a significant effect on the performance of samples regarding their resistance to corrosion. It was concluded that carbon FRP wraps were able to confine concrete, slowing deterioration from cracking and spalling and inhibiting the passage of salt water.     

Some silicon-based heterostructures for optical applications

In this paper, we will present our recent research on the growth and characterization of some Si-based heterostructures for optical and photonic devices. The heterostructures to be discussed are ZnO nanorods on Si, SiO₂, and other substrates such as SiN and sapphire. We will also consider strained Si_1−xGe_x/Si heterostructures for Si optoelectronics. The performance and functionality extension of Si technology for photonic applications due to the development of such heterostructures will be presented. We will focus on the results of structural and optical characterization in relation to device properties. The structural characterization includes x-ray diffraction for assessment of the crystallinity and stress in the films and secondary ion mass spectrometry for chemical analysis. The optical properties and electronic structure were investigated by using photoluminescence. The device application of these thin film structures includes detectors, lasers, and light emitting devices. Some of the Si-based heterostructures to be presented include devices emitting and detecting up to the blue-green and violet wave lengths.     

A proposal for “correction values” for winter outdoor design temperatures

This study aims to find a correlation between winter outdoor design temperature (WDT) and mass of the building envelope. The daily variations of the inside surface temperatures and heat fluxes of the walls under various climatic conditions and different wall constructions have been calculated by a computer program based on the response factor technique, which uses variable outside air temperature and solar radiation and constant inside air temperature values as input climatic data. The analysis of the relation between mass of the walls and inside surface heat fluxes resulted with the correction values for winter design temperature (WDTCV) depending on the mass of the wall and on the direction of facades for different climatic zones.     

Effects of rf power on the structural properties of carbon nitride thin films prepared by plasma enhanced chemical vapour deposition

Carbon nitride (CN_x) thin films were deposited by radio frequency plasma enhanced chemical vapour deposition (rf PECVD) technique from a gas mixture of methane (CH₄), hydrogen (H₂) and nitrogen (N₂). The effects of rf power on the structural properties of CN_x thin films were discussed in this paper. It was found that rf power had significant effects on the growth rate, structural and morphological properties of the deposited films. The point of transition of the growth rate trend marked the equilibrium condition for primary and secondary reactions in growth kinetics of the film with respect to rf power. The films grown at this optimum rf power were most ordered in structure with high surface roughness and had the lowest N incorporation. This work showed that H etching effects and ion bombardment effects increase with increase in rf power and strongly influenced the structure of the CN_x films.     

Dual Activity BLEG-1 from Bacillus lehensis G1 Revealed Structural Resemblance to B3 Metallo-β-Lactamase and Glyoxalase II: An Insight into Its Enzyme Promiscuity and Evolutionary Divergence

Metallo-β-lactamases (MBLs) are class B β-lactamases from the metallo-hydrolase-like MBL-fold superfamily which act on a broad range of β-lactam antibiotics. A previous study on BLEG-1 (formerly called Bleg1_2437), a hypothetical protein from Bacillus lehensis G1, revealed sequence similarity and activity to B3 subclass MBLs, despite its evolutionary divergence from these enzymes. Its relatedness to glyoxalase II (GLXII) raises the possibility of its enzymatic promiscuity and unique structural features compared to other MBLs and GLXIIs. This present study highlights that BLEG-1 possessed both MBL and GLXII activities with similar catalytic efficiencies. Its crystal structure revealed highly similar active site configuration to YcbL and GloB GLXIIs from Salmonella enterica, and L1 B3 MBL from Stenotrophomonas maltophilia. However, different from GLXIIs, BLEG-1 has an insertion of an active-site loop, forming a binding cavity similar to B3 MBL at the N-terminal region. We propose that BLEG-1 could possibly have evolved from GLXII and adopted MBL activity through this insertion.     

Fermentation and oxygen transfer characteristics in serine alkaline protease production by recombinant Bacillus subtilis in molasses‐based complex medium

Serine alkaline protease (SAP) production in a complex medium based on physically pretreated molasses by recombinant Bacillus subtilis carrying pHV1431::subC gene is described. The effects of oxygen transfer were investigated in 3.5 dm³ bioreactor systems with controls for agitation rate, dissolved oxygen, pH, temperature, and foam formation under two different agitation rates, ie N = 500 and 750 min^?1, and four different air flow rates, ie Q/V_R = 0.2, 0.5, 0.7, and 1.0 vvm, at a molasses concentration equivalent to initial sucrose concentration (C_So) of 20 kg m^?3. The yield values (Y_X/S, Y_X/O, Y_S/O) and maintenance coefficient of oxygen (m_O), were calculated. m_O decreased with the increase in the air‐inlet rate. Increase in oxygen transfer rate increased the rate of growth and SAP activity, and affected the cultivation time to achieve maximum expression of SAP activity. At Q/V_R = 0.5 vvm and N = 750 min^?1, SAP activity reached 2250 U cm^?3 at t = 36 h. The oxygen transfer coefficient (K_La) and oxygen uptake rate (?r_O) were measured throughout the fermentations and their variation with the oxygen transfer conditions determined. New correlations for the calculation of K_La and ?r_O are proposed. Copyright © 2004 Society of Chemical Industry     

Effective properties of cemented granular materials

An analytical model is developed to describe the effective elastic properties of a cemented granular material that is modeled as a random packing of identical spheres. The elastic moduli of grains may differ from those of cement. The effective bulk and shear moduli of the packing are calculated from geometrical parameters (the average number of contacts per sphere and porosity), and from the normal and tangential stiffnesses of a two-grain combination. The latter are found by solving the problems of normal and tangential deformation of two elastic spherical grains cemented at their contact. A thin cement layer is approximated by an elastic foundation, and the grain-cement interaction problems are reduced to linear integral equations. The solution reveals a peculiar distribution pattern of normal and shear stresses at the cemented grain contacts: the stresses are maximum at the center of the contact region when the cement is soft relative to the grain, and are maximum at the periphery of the contact region when the cement is stiff. Stress distribution shape gradually varies between these two extremes as the cement's stiffness increases. The solution shows that it is mainly the amount of cement that influences the effective elastic properties of cemented granular materials. The radius of the cement layer affects the stiffness of a granular assembly much more strongly than the stiffness of the cement does. This theoretical model is supported by experimental results.