Remelting of Iron Shavings with the Synergistic Effect of Minimum Metal Loss

Metallurgist - The well-known technologies of remelting iron shavings lead to significant (30%) losses of metal. An electroslag smelting furnace with graphite electrodes is proposed for remelting...     

Combustion in Ni–Al System with Cu Additive (Powder or Rod). Experiment and Mathematical Model

Russian Journal of Non-Ferrous Metals - Experimental studies have been carried out with theoretical calculations of wave synthesis in the Ni–Al–Cu system using a mathematical model....     

Cerium Effect on the Phase Composition and Crystallization Behavior of Aluminum Casting Alloys Based on the Al–Mg–Si System

Russian Journal of Non-Ferrous Metals - Using a Thermo-Calc software package (TCAl4.0 database), unexplored data concerning the phase composition and crystallization behavior of...     

Ensuring Strength in Laser Welds Made Using the Dispersion-Hardened EP693 Nickel Alloy

Russian Journal of Non-Ferrous Metals - The process of making a weld using the heat-resistant EP693 alloy (Ni–Cr–W–Co–Co–Mo system) to make assemblies and components...     

Grain Refinement of Casting Aluminum Alloys of the Al–Mg–Si System by Processing the Liquid Phase Using Nanosecond Electromagnetic Pulses

Russian Journal of Non-Ferrous Metals - In this paper, using the AA 511 alloy of the Al–Mg–Si system as an example, it is shown that the irradiation of aluminum melts with nanosecond...     

Microdistortions,Hardness, and Young’s Modulus of Multicomponent Bcc Solid Solutions

Powder Metallurgy and Metal Ceramics - The phase composition, type II microstresses, and coherent scattering domains (CSDs) of multicomponent (medium- and high-entropy) bcc solid solutions with an...     

The Influence of Hydrogen Concentration in an Ar–H2 Mixture on the Electrical Properties of Solid Oxide Fuel Cells

Powder Metallurgy and Metal Ceramics - Fuel cells are today among the most efficient and environmentally friendly devices for the production of electricity. They are developing rapidly and are...     

Equivalent linear limit states

The replacement of any limit state function by an equivalent linear function is discussed in detail and it is shown that there are several methods by which such an equivalence may be established. In the case of multiple failure mode problems the definition of fully equivalent linear functions requires the additional consideration of mode correlations. The manner in which this may be carried out is discussed and it is shown that, for most practical cases, a relatively simple analysis is likely to be sufficient to define the set of equivalent linear limit states, with the advantage that the established theory of such linear limit states may then be employed in the majority of reliability analyses.     

Lead and cadmium in teeth,bone and kidneys of rats with a standard Pb‐Cd supply

Male Wistar rats received a combination of 25 ppm PbCl₂ and 5 ppm CdCl₂ in drinking water at different developmental stages. Pb and Cd levels of incisors, molars, epiphyses, diaphyses and kidney cortex were recorded by atomic absorption spectrophotometry. The results confirmed that Pb has an affinity for hard tissue and especially to teeth, but it also accumulated in soft tissues under the above conditions. In addition, the results indicated none or only a moderate placental or mammary barrier for Pb, and suggested a high absorption of lead from the intestine of sucklings. The results also confirmed that kidney cortex is a primary target for Cd, and indicated that Cd has crossed the placental and mammary barriers to some degree. The positive significant correlation between Cd levels in molars and kidney cortex suggested that rodent molars indicate a degree of Cd absorption, whereas incisors do not. It is supposed that rodent molars are comparable to human deciduous teeth. It is thus confirmed that human deciduous teeth indicate previous lead exposure. It is further inferred that they also can be used as indicators of previous Cd‐exposures.     

Hydrocarbon stress response of four tropical plants in weathered crude oil contaminated soil in microcosms

Responses to hydrocarbon stress of four tropical plants Panicum maximum, Zea mays, Centrosema sp. and Pueraria sp. grown in crude oil contaminated soils (1%, 5% and 10% w/w) were evaluated in a green house. Plants’ percentage survival, shoot heights, biomass development, and phytotoxicity susceptibility were used as indicators of growth, stress response and hydrocarbon tolerance. Relative to control, shoot heights and biomass of plants reduced with increasing hydrocarbon concentration, but 1% w/w oil-in-soil, stimulated shoot heights (5.9% and 6.4%) and weights (21.9% and 2.3%) in P. maximum and Centrosema sp. respectively. P. maximum tolerated the contaminant stress with biomass yields of 113% and 57% of control respectively in 1% and 10% w/w oil-in-soil. All the plants had 100% survival in 1% w/w, but considerably reduced survival in 10% w/w oil-in-soil. These results show that P. maximum has great potential for phytoremediation of petroleum contaminated soil.