The influence of sulphur on the processing of zirconia based ceramics

Yttria stabilized zirconia powders were synthesized by the coprecipitation route. Zirconium oxychloride containing sulphur as contamination and analytical grade yttrium chloride were used as raw materials. Powders were calcined at temperatures between 600 and 1100 °C and ground by ball and attrition milling. The ceramic bodies were sintered at 1350 and 1550 °C for 1 h and the apparent density was measured. In the present work it is shown that the most deleterious effect of sulphur was observed in 3 mol% yttria stabilized zirconia, especially when the pellets were obtained at high pressures and sintered at 1500 °C. The elimination of sulphur at higher calcination temperatures minimizes the effects caused by this contamination, despite the reduction of powder surface area. The best processing condition to obtain high density zirconia ceramics from powders contaminated with sulphur was established.     

Structural, magnetic and electrical properties of (La0.70−xNdx)Sr0.30Mn0.70Cr0.30O3 with 0 ≤ x ≤ 0.30

The structural, magnetic and electrical properties of (La_0.70−xNd_x)Sr_0.30Mn_0.70Cr_0.30O₃ perovskites (0 ≤ x ≤ 0.30) prepared by the usual ceramic procedure were investigated. Structural Rietveld refinement revealed that these compounds crystallize in a rhombohedral perovskite structure when x = 0, 0.10 and 0.20, while for x = 0.30 the structure becomes orthorhombic (Pbnm). It was found that the substitution of La by Nd reduces the Curie temperature (T_C). The FC, ZFC, M(H) and AC susceptibility measurements show typical canted-antiferromagnetism for the Nd-doped samples, in which a ferromagnetic component coexists with predominant antiferromagnetic interactions. The values of the magnetization (M(H)) decrease very slightly when increasing the Nd content, compared to the undoped sample (M_S values at 5 T and 2 K are, respectively, 47.9, 47.3 and 47.5 emu/g for x = 0.10, 0.20 and 0.30, compared to 48.2 emu/g for x = 0), indicating that the Nd³⁺ contribution is negligible compared to the total moment of the ferromagnetic (Mn/Cr) network. The resistivity increases by several orders of magnitude with Nd-doping and the semi-conducting behaviour persists in the whole temperature range. The interaction between Mn⁴⁺–O–Cr³⁺and Cr³⁺–O–Cr³⁺ is responsible for the semi-conducting state.     

Computational Technique to Assess Warhead Lethality against Ballistic Missile

This paper addresses a computational procedure to assess the lethality of kinetic energy projectile warheads against tactical ballistic missile payloads with an innovative and rational damage metric. The individual lethality of different projectile geometries impacting at hypervelocity at different configurations is estimated via a numerical damage index computed from hydrocode simulations. The highest count of possible impacts to the payload is achieved by optimizing the warhead’s configuration and time of detonation, a priori knowledge of the target’s location and speed. The total damage to the payload characterizes the warhead’s lethality for the particular engagement conditions. An example shows the application of the process and potential advantages.     

Controlled release matrices and micro/nanoparticles of chitosan with antimicrobial potential: development of new strategies for microbial control in agriculture

The control of micro‐organisms responsible for pre‐ and postharvest diseases of agricultural products, mainly viruses and fungi, is a problem that remains unresolved, together with the environmental impact of the excessive use of chemicals to tackle this problem. Current efforts are focused on the search for efficient alternatives for microbial control that will not result in damage to the environment or an imbalance in the existing biota. One alternative is the use of natural antimicrobial compounds such as chitosan, a linear cationic biopolymer, which is biodegradable, biocompatible and non‐toxic, has filmogenic properties and is capable of forming matrices for the transport of active substances. The study of chitosan has attracted great interest owing to its ability to form complexes or matrices for the controlled release of active compounds such as micro‐ and nanoparticles, which, together with the biological properties of chitosan, has allowed a major breakthrough in the pharmaceutical and biomedical industries. Another important field of study is the development of chitosan‐based matrices for the controlled release of active compounds in areas such as agriculture and food for the control of viruses, bacteria and fungi, which is one of the least exploited areas and holds much promise for future research. © 2013 Society of Chemical Industry     

Conversion efficiency of glucose/xylose mixtures for ethanol production using Saccharomyces cerevisiae ITV01 and Pichia stipitis NRRL Y‐7124

BACKGROUND: Efficient conversion of glucose/xylose mixtures from lignocellulose is necessary for commercially viable ethanol production. Oxygen and carbon sources are of paramount importance for ethanol yield. The aim of this work was to evaluate different glucose/xylose mixtures for ethanol production using S. cerevisiae ITV‐01 (wild type yeast) and P. stipitis NRRL Y‐7124 and the effect of supplying oxygen in separate and co‐culture processes. RESULTS: The complete conversion of a glucose/xylose mixture (75/30 g L^?1) was obtained using P. stipitis NRRL Y‐7124 under aerobic conditions (0.6 vvm), the highest yield production being Y_p/s = 0.46 g g^?1, volumetric ethanol productivity Q_pmax = 0.24 g L^?1 h^?1 and maximum ethanol concentration P_max = 34.5 g L^?1. In the co‐culture process and under aerobic conditions, incomplete conversion of glucose/xylose mixture was observed (20.4% residual xylose), with a maximum ethanol production of 30.3 g L^?1, ethanol yield of 0.4 g g^?1 and Q_pmax = 1.26 g L^?1 h^?1. CONCLUSIONS: The oxygen present in the glucose/xylose mixture promotes complete sugar consumption by P. stipitis NRRL Y‐7124 resulting in ethanol production. However, in co‐culture with S. cerevisiae ITV‐01 under aerobic conditions, incomplete fermentation occurs that could be caused by oxygen limitation and ethanol inhibition by P. stipitis NRRL Y‐7124; nevertheless the volumetric ethanol productivity increases fivefold compared with separate culture. Copyright © 2011 Society of Chemical Industry     

Synthesis and corrosion inhibition mechanism of ammonium-based ionic liquids on API 5L X60 steel in sulfuric acid solution

A novel class of four new-free-halide-ionic liquids (ILs) derived from ammonium was synthesized and characterized via spectroscopic methods such as ¹H NMR and ¹³C NMR. The synthesized compounds were evaluated as corrosion inhibitors (CIs) of API 5L X60 steel in 1 M sulfuric acid by means of the potentiodynamic polarization and weight loss techniques. The results confirmed that the inhibition efficiency displayed by the four ILs is a function of their concentration and molecular structure. The obtained inhibition efficiency (η) ranged from 51 to 89%, confirming that the new class of ILs is good for corrosion inhibition purposes. The analysis of the potentiodynamic results showed that these compounds inhibit the corrosion of steel, classifying them as mixed-type CIs. The adsorption process of these new CIs on the API 5L X60 steel surface, which obeyed the Langmuir isotherm, was found to be physical and chemical. The SEM and EDX analyses confirmed the protection of steel in the corrosive medium.     

Potential for reducing emissions in a diesel engine by fuelling with conventional biodiesel and Fischer-Tropsch diesel

A gas-to-liquid (GTL) fuel derived from Low Temperature Fischer-Tropsch process has been tested in an automotive diesel engine fulfilling Euro 4 emissions regulations. Both regulated and non-regulated emissions have been compared with those of a commercial diesel fuel, a commercial biodiesel fuel and a GTL-biodiesel fuel (30% and 70% v/v, respectively) in order to check blending properties, synergistic effects and compatibility between first and second generation production technologies for biofuel consumption in current diesel engines. After presenting a detailed literature review, and confirming that similar efficiencies are attained with the four tested fuels under identical road-like operating conditions (this meaning fuel consumption is inversely proportional to their heating values), significant reductions in smoke opacity, particulate matter emissions and particle number concentration were observed with both GTL and biodiesel fuels, with small changes in NO_x emissions. Compared with the reductions in PM emissions derived from the use of biodiesel fuels, those derived from using GTL fuels were quite similar, despite its lower soot emissions reductions. This can be explained by the lower volatile organic fraction of the PM in the case of GTL. By adequately blending both fuels, a considerable potential to optimise the engine emissions trade-off is foreseen.     

Cyclic steps: A phenomenon of supercritical shallow flow from the high mountains to the bottom of the ocean

Cyclic steps constitute a characteristic bedform of Froude-supercritical shallow flow over an erodible bed. They are long-wave features that are bounded by hydraulic jumps and migrate upstream. They can be seen in alluvial streams, stream in cohesive sediment, bedrock streams, and on the seafloor in response to turbidity currents. Recent progress in the modeling of cyclic steps is summarized.