Potensoft: MATLAB-based software for potential field data processing, modeling and mapping

An open-source software including an easy-to-use graphical user interface (GUI) has been developed for processing, modeling and mapping of gravity and magnetic data. The program, called Potensoft, is a set of functions written in MATLAB. The most common application of Potensoft is spatial and frequency domain filtering of gravity and magnetic data. The GUI helps the user easily change all the required parameters. One of the major advantages of the program is to display the input and processed maps in a preview window, thereby allowing the user to track the results during the ongoing process. Source codes can be modified depending on the users' goals. This paper discusses the main features of the program and its capabilities are demonstrated by means of illustrative examples. The main objective is to introduce and ensure usage of the developed package for academic, teaching and professional purposes.     

An interferometer for use with gauge blocks up to 1000 mm with laser and white-light sources

A displacement interferometer is described for measuring gauge blocks, in which a spatial filter is used to combine a laser beam with a white-light beam, and the length of the block is calculated from the phase differences of the laser signal corresponding to the centers of gravity of the achromatic fringes from the gauge and from the reference plate. __________ Translated from Izmeritel’naya Tekhnika, No. 9, pp. 3–5, September, 2006.     

Influence of Field Effects on the Performance of InGaAs-Based Terahertz Radiation Detectors

A detailed electrical characterization of high-performance bow-tie InGaAs-based terahertz detectors is presented along with simulation results. The local surface potential and tunnelling current were scanned over the surfaces of the detectors by means of Kelvin probe force microscopy (KPFM) and scanning tunnelling microscopy (STM), which also enabled the determination of the Fermi level. Current-voltage curves were measured and modelled using the Synopsys Sentaurus TCAD package to gain deeper insight into the processes involved in detector operation. In addition, we performed finite-difference time-domain (FDTD) simulations to reveal features related to changes in the electric field due to the metal detector contacts. The investigation revealed that field-effect-induced conductivity modulation is a possible mechanism contributing to the high sensitivity of the studied detectors.     

Electrically controlled release of 5-fluorouracil from conductive gelatin methacryloyl-based hydrogels

Herein, electro-responsive hydrogels were obtained by incorporation of poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) into the gelatin methacryloyl (GelMA) by using photopolymerization technique. Hydrogels were characterized by FTIR and scanning electron microscopy analyses. Cytotoxicity tests were performed by L929 cell lines to determine cell compatibility. Swelling tests were conducted to investigate the water uptake capacity of hydrogels. 5-fluorouracil (5-FU) was selected as a model drug as it is known as a topical drug for some skin cancer type treatment. The release of 5-FU from the hydrogel was provided in efficient and controlled manner at simulated skin cancer (pH = 5.5) and under 0 and 1.5 V. The simulated drug delivery experiments conducted in vitro revealed that the drug releasing amount was higher when voltage is applied to the hydrogels. All results visualized that the obtained GelMA-based PEDOT/PSS hydrogels with enhanced electrical properties could be a potential candidate as an electrically sensitive drug carrier for treatment of skin cancer in the future applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46914.     

The effects of extrusion conditions and the addition of volatile compounds and flavour enhancers to corn grits on the retention of the volatile compounds and texture of the extrudates

Corn grits that were supplemented with isovaleraldehyde, ethyl butyrate, butyric acid and flavour enhancers were extruded under different processing conditions. Volatile compounds retained in the extrudates were isolated by dynamic headspace and analysed using gas chromatography–mass spectrometry. The expansion ratio, density and cut force to break down the extrudates were evaluated and aroma intensity was assessed using a multisample difference test. Butyric acid showed the greatest retention (96.4%), regardless of the extrusion conditions. All compounds were better retained when samples were extruded at 20% feed moisture and 90 °C processing temperature (2.9–81.0%), conditions that also resulted in greater aromatic intensity (moderate to moderate‐strong intensity). The addition of volatile compounds reduced the expansion ratio and cut force, whereas the addition of flavour enhancers increased the expansion ratio but reduced ethyl butyrate and butyric acid retention.     

Effect of laboratory foamer on asphalt foaming characteristics and foamed mixture properties

In the United States, mechanical foaming is the most popular method for producing warm mix asphalt, which is the latest technology implemented to reduce the production temperature and/or enhance the compactability of asphalt mixtures. Three commonly used commercially available laboratory foamers to produce asphalt foams include the Wirtgen WLB 10S (Wirtgen foamer), the InstroTek Accufoamer (InstroTek foamer) and the Pavement Technology Inc. Foamer (PTI foamer). Though these foamers have been widely used in research studies and construction practice, it is still unknown whether they produce asphalt foams with the same quality and quantity. In this study, asphalt foaming characteristics produced by these three laboratory foamers were measured using a non-contact test set-up consisting of a laser device and a digital camera, and compared in terms of instantaneous volume expansion, foam stability and surface area evolution of foam bubbles. Additionally, the workability, coatability and mechanical performance of foamed mixtures prepared using these same laboratory foamers were compared against the conventional hot mix asphalt (HMA). Test results indicated that foamed asphalts produced by the Wirtgen foamer had the largest volume expansion and greatest foam stability, followed by those produced by the InstroTek foamer and the PTI foamer. The optimum foaming water content (W_opt) was determined for each laboratory foamer based on the workability and coatability results of the corresponding foamed mixtures. In addition, the performance evaluation of the foamed mixtures produced at W_opt values indicated equivalent mixture stiffness but greater moisture susceptibility as compared to the conventional HMA.     

Clarification and pasteurisation effects on monomeric anthocyanins and percent polymeric colour of black carrot (Daucus carota L.) juice

Black carrots (BCs) are a rich source of stable anthocyanins (ACNs). The purpose of this study was to evaluate the effects of clarification and pasteurisation on ACNs of black carrot juice (BCJ). Monomeric ACNs, ACN profile and percent polymeric colour were determined during processing of BCJ. While depectinisation and bentonite treatments resulted in 7% and 20% increases in monomeric ACN content of BCJ, respectively, gelatine–kieselsol treatment and pasteurisation resulted in 10% and 3–16% reduction. Percent polymeric colour decreased after clarification, but substantially increased in samples subjected to heat. ACNs of BCJ samples were identified by HPLC–MS. Unclarified BCJ contained cyanidin-3-galactoside-xyloside-glucoside-ferulic acid as the major ACN, followed by cyanidin-3-galactoside-xyloside-glucoside-coumaric acid, and cyanidin-3-galactoside-xyloside-glucoside. After depectinisation, two more ACNs (cyanidin-3-galactoside-xyloside and cyanidin-3-galactoside-xyloside-glucoside-sinapic acid) were also identified. These results indicated that depectinisation and bentonite treatment had positive effect on the colour of BCJ, while gelatin–kieselsol treatment and pasteurisation had negative effect.     

A multinomial logit analysis of risk factors influencing road traffic injury severities in the Erzurum and Kars Provinces of Turkey

A retrospective cross-sectional study is conducted analysing 11,771 traffic accidents reported by the police between January 2008 and December 2013 which are classified into three injury severity categories: fatal, injury, and no injury. Based on this classification, a multinomial logit analysis is performed to determine the risk factors affecting the severity of traffic injuries. The estimation results reveal that the following factors increase the probability of fatal injuries: drivers over the age of 65; primary-educated drivers; single-vehicle accidents; accidents occurring on state routes, highways or provincial roads; and the presence of pedestrian crosswalks. The results also indicate that accidents involving cars or private vehicles or those occurring during the evening peak, under clear weather conditions, on local city streets or in the presence of traffic lights decrease the probability of fatal injuries. This study comprises the most comprehensive database ever created for a Turkish sample. This study is also the first attempt to use an unordered response model to determine risk factors influencing the severity of traffic injuries in Turkey.     

Identification of Bioactivity,Volatile and Fatty Acid Profile in Supercritical Fluid Extracts of Mexican arnica

Supercritical fluid extraction (SFE) is a sustainable technique used for the extraction of lipophilic metabolites such as pigments and fatty acids. Arnica plant is considered a potential candidate material with high antioxidant and antimicrobial activities. Therefore, in this study, a locally available Heterotheca inuloides, also known as Mexican arnica, was analyzed for the extraction of high-value compounds. Based on different pressure (P), temperature (T), and co-solvent (CoS), four treatments (T) were prepared. A maximum 7.13% yield was recovered from T2 (T = 60 °C, P = 10 MPa, CoS = 8 g/min), followed by 6.69% from T4 (T = 60 °C, P = 30 MPa, CoS = 4 g/min). Some bioactive sesquiterpenoids such as 7-hydroxycadalene, caryophyllene and δ-cadinene were identified in the extracts by GC/MS. The fatty acid profile revealed that the main components were palmitic acid (C16:0), followed by linoleic acid (C18:2ω6c), α-linolenic acid (C18:3ω3) and stearic acid (C18:0) differing in percent yield per treatment. Antibacterial activities were determined by the agar diffusion method, indicating that all the treatments exerted strong antibacterial activity against S. aureus, C. albicans, and E. coli strains. The antioxidant capacity of the extracts was also measured by three in vitro assays, DPPH, TEAC and FRAP, using Trolox as a standard. Results showed high antioxidant capacity enabling pharmaceutical applications of Mexican arnica.