Equilibrium and kinetic adsorption study of Basic Yellow 28 and Basic Red 46 by a boron industry waste

In this study, the adsorption characteristics of Basic Yellow 28 (BY 28) and Basic Red 46 (BR 46) onto boron waste (BW), a waste produced from boron processing plant were investigated. The equilibrium adsorption isotherms and kinetics were investigated. The adsorption equilibrium data were analyzed by using various adsorption isotherm models and the results have shown that adsorption behavior of two dyes could be described reasonably well by a generalized isotherm. Kinetic studies indicated that the kinetics of the adsorption of BY 28 and BR 46 onto BW follows a pseudo-second-order model. The result showed that the BW exhibited high-adsorption capacity for basic dyes and the capacity slightly decreased with increasing temperature. The maximum adsorption capacities of BY 28 and BR 46 are reported at 75.00 and 74.73mgg(-1), respectively. The dye adsorption depended on the initial pH of the solution with maximum uptake occurring at about pH 9 and electrokinetic behavior of BW. Activation energy of 15.23kJ/mol for BY 28 and 18.15kJ/mol for BR 46 were determined confirming the nature of the physisorption onto BW. These results indicate that BW could be employed as low-cost material for the removal of the textile dyes from effluents.     

Use of superswelling acrylamide/maleic acid hydrogels for monovalent cationic dye adsorption

Acrylamide/maleic acid (AAm/MA) superswelling hydrogels prepared by irradiation with γ radiation were used in experiments on swelling, diffusion, and adsorption of some water‐soluble monovalent cationic dyes such as basic red 5 (BR‐5), basic violet 3 (BV‐3), and brilliant cresyl blue (BCB). The AAm/MA hydrogel containing 60 mg MA and irradiated at 5.20 kGy was used for swelling and diffusion studies in water and aqueous solutions of the monovalent cationic dyes. For this superswelling hydrogel the swelling studies indicated that swelling increased in the following order: BR‐5 > water > BV‐3 ≥ BCB. The diffusion of water and the dyes within the hydrogels was found to have a non‐Fickian character. The uptake of the cationic dyes to the AAm/MA superswelling hydrogels was studied by the batch adsorption technique at 25°C. The uptake of dyes within the hydrogel increased in the following order: BR‐5 > BV‐3 > BCB. In the experiments of the adsorption equilibrium, S‐type adsorption in Giles' classification system was found. The binding ratio of the hydrogel/dye systems was gradually increased with the increase of the MA content in the AAm/MA hydrogel and the irradiation dose. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1809–1815, 2001     

Determination of diffusion coefficient of oxygen into polymers by using electron spin resonance spectroscopy. I. Poly(methyl methacrylate)

A simple technique has been proposed for the measurement of the diffusion coefficient of oxygen into polymeric spheres. The technique is based on the scavenging of radicals produced by high energy radiation by oxygen. The diffusion coefficient of oxygen determined for poly(methyl methacrylate) has shown an inverse dependency on the dose received. Diffusion coefficient determined for low doses (D = 3.4 × 10^?8 cm²/s) as well as that determined after extrapolation to zero dose (D₀ = 3.7 × 10^?8 cm²/s) are in excellent agreement with the values reported in the literature.     

A study on the adsorption of some cationic dyes onto acrylamide/itaconic acid hydrogels

Summary Acrylamide/itaconic acid (AAm/IA) hydrogels prepared by irradiating with radiation were used in experiments on the adsorption of some cationic dyes such as basic red 9 (BR 9), basic green 4 (BG 4), cresyl violet (CV), and basic blue 20 (BB 20). Adsorption of the cationic dyes onto AAm/IA hydrogels is studied by batch adsorption technique. In the experiments of the adsorption, Langmiur type adsorption in the Giles classification system was found. Monolayer coverages for AAm/IA hydrogel-dye systems were calculated by using B point method. Adsorption studies indicated that monolayer coverages of AAm/IA hydrogel by these dyes were increased with following order; BB 20>CV>BR9>BG 4.     

Radiation‐induced graft polymerization of glycidyl methacrylate onto PE/PP nonwoven fabric and its modification toward enhanced amidoximation

A nonwoven fabric made of polypropylene coated by polyethylene was used as the trunk polymer in the preparation of a highly efficient new adsorbent. Metal ion uptake capacity has been aimed to be increased by introducing double amidoxime groups per repeating unit of the chains grafted to trunk polymer. The base polymer was irradiated by electron beams with a dose of 200 kGy under N₂ atmosphere and glycidyl methacrylate (GMA) was grafted onto irradiated nonwoven fabric. Grafting conditions were optimized, and GMA‐grafted polymer was modified with 3,3′‐iminodipropionitrile in ethanol at 80°C. GMA grafting (150%) was determined to be the optimum degree given that higher extent of grafting rendered the materials brittle. Pendant nitrile groups were then amidoximated by using 6% hydroxylamine in methanol–water mixture (1 : 1). The all‐polymeric structures were characterized by using FTIR, SEM, and thermal analysis methods, confirming the grafting, modification, and amidoximation stages gravimetrically, spectroscopically, and visually. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Tunable fluorescent and antimicrobial properties of poly(vinyl amine) affected by the acidic or basic hydrolysis of poly(N-vinylformamide)

Synthesis of poly(N-vinylformamide) (PNVF) and its subsequent hydrolysis to convert it to poly(vinyl amine) (PVAm) were performed. Kinetics of acidic and basic hydrolysis of poly(N-vinylformamide) (PNVF), and products of hydrolysis were investigated by using Fourier transform infrared, size exclusion chromatography, ¹H NMR, and ¹³C NMR spectroscopies, and thermogravimetric analysis. It was observed that amide groups did not completely transform into amine groups by acidic hydrolysis of PNVF while the conversion of amides into amine groups via basic hydrolysis of PNVF was complete in 12 h, as confirmed by spectroscopic measurements. Results of extensive characterization revealed significant structural and conformational differences between acidic and basic hydrolysis products. Fluorescence spectroscopy was used for the first time to follow the conversion of amide groups into amine groups. The fluorescence intensity of PVAm obtained from basic hydrolysis of PVNF showed significant increase with amide/amine conversion. Finally, PVAm obtained from acidic hydrolysis of PNVF demonstrated potent antimicrobial activity, 10–20 times more, against common pathogens for example, C. albicans as fungal strain and E. coli, S. aureus, B. subtilis, and P. aeruginosa as bacterial strains as compared to PVAm obtained from basic hydrolysis.