Phenotypic identification and technological properties of lactic acid bacteria isolated from traditionally processed fish products of the Eastern Himalayas

Sukako maacha, gnuchi, sidra and sukuti are traditional smoked and sun-dried fish products of the Eastern Himalayan regions of Nepal and India. A total of 40 samples of sukako maacha (14), gnuchi (6), sidra (10) and sukuti (10) were collected and were analysed for microbial load. Population of lactic acid bacteria (LAB) as well as aerobic mesophilic counts ranged from 4.7-8.3 to 5.1-8.5 log cfu g(-1), respectively. A total of 189 strains of LAB were isolated from sukako maacha, gnuchi, sidra and sukuti samples, out of which 171 strains were cocci and 15 strains, were heterofermentative lactobacilli. LAB were identified on the basis of phenotypic characters including API system as Lactococcus lactis subsp. cremoris, Lactococcus lactis subsp. lactis, Lactococcus plantarum, Leuconostoc mesenteroides, Enterococcus faecium, Enterococcus faecalis, Pediococcus pentosaceus and Weissella confusa. LAB strains produced a wide spectrum of enzymes. Some strains of LAB showed antagonistic properties against pathogenic strains. None of the strains produced biogenic amines in the method applied. This paper is the first report on the microbial composition, mostly lactic acid bacteria, of traditionally processed fish products of Eastern Himalayas.     

Enzyme-Assisted Process for Production of Superior Quality Vanilla Extracts from Green Vanilla Pods Using Tea Leaf Enzymes

Vanilla planifolia Andrews is a perennial tropical vine and is an orchid grown for its pleasant flavor. There is an increasing trend world over for using natural flavors. Vanilla being an important food flavoring ingredient, the demand for natural vanilla extract is increasing. Hence, the aim of the present study was to prepare vanilla extract from green beans without going through the elaborate and time-consuming conventional curing process. Vanilla beans after size reduction were mixed in a suitable proportion with tea leaf enzyme extract (TLEE) and incubated to facilitate action of enzymes on vanilla flavor precursors. The beans mix was squeezed, and the filtrate was treated with ethanol to extract the vanilla flavor. TLEE-treated extracts had higher vanillin content (4.2%) compared to Viscozyme extract (2.4%). Also, it had higher intensity of vanilla flavor, sweet, and floral notes. Further, electronic nose analysis confirmed the discrimination between extracts. It was concluded that the use of TLEE is very much useful to obtain higher yield of vanilla extract and superior quality vanilla flavor, which avoids the traditional laborious and time-consuming curing process.     

Simulation of population balance model-based particulate processes via parallel and distributed computing

Population Balance Models (PBMs), a class of integro partial differential equations, are utilized for simulating dynamics of numerous particulate systems. PBMs describe the time evolutions and distributions of many particulate processes and their efficient and quick simulation are critical for enhanced process control and optimization, especially for real-time applications. However, their intensive computational resource requirement is largely a prohibitive factor in the utility of PBMs for control and optimization. This paper describes how distributed computing systems may be leveraged to execute PBM-based simulations thus achieving time savings, using MATLAB's Distributed Computing Toolbox. A parallel computing algorithm was developed for a three dimensional and four dimensional population balance model with built-in constructs such as SPMD that ran efficiently on a cluster of two quad-core machines linked via a gigabit ethernet cable. Speedup of 6.2 and 5.7 times were achieved with 8 workers, over an un-parallelized code, for a 3 and 4 dimensional PBM respectively. Evaluations on work efficiency and scalability further affirm the algorithms’ respectable performance on larger clusters despite significant memory transfer overheads.     

Assessment of flow induced vibration in a sodium-sodium heat exchanger

The 500 MWe Prototype Fast Breeder Reactor (PFBR) is under construction at Kalpakkam. It is a liquid metal sodium cooled pool type fast reactor with all primary components located inside a sodium pool. The heat produced due to fission in the core is transported by primary sodium to the secondary sodium in a sodium to sodium Intermediate Heat Exchanger (IHX), which in turn is transferred to water in the steam generator. PFBR IHX is a shell and tube type heat exchanger with primary sodium on shell side and secondary sodium in the tube side. Since IHX is one of the critical components placed inside the radioactive primary sodium, trouble-free operation of the IHX is very much essential for power plant availability. To validate the design and the adequacy of the support system provided for the IHX, flow induced vibration (FIV) experiments were carried out in a water test loop on a 60° sector model. This paper discusses the flow induced vibration measurements carried out in 60° sector model of IHX, the modeling criteria, the results and conclusion.     

Fracture behaviour of fly-ash filled FRP composites

The major objective of this study was to determine the fracture toughness and fracture surface energy of epoxy, epoxy/fly-ash, epoxy/carbon fibre, epoxy/carbon fibre/fly-ash, epoxy/glass fibre and epoxy/glass fibre/fly-ash composites. The quality of composite specimens was evaluated by the ultrasonic method. The results show that a fly-ash particle can arrest the crack path and thus improve the fracture properties of fibre reinforced plastic (FRP) composites. The results of this study have further significance in view of the fact that fly-ash powder is far cheaper than carbon fibre, glass fibre and epoxy resin.     

A figure of merit for evaluating sustainability of renewable energy systems

For grading different types of renewable energy based electricity generation systems, a figure of merit has been proposed and evaluated. The figure of merit has been obtained by analyzing total energy utilization in constructing and installing the systems and by their respective electricity generation. The gross carbon emission has also been estimated for evaluation of figure of merit. This figure of merit clearly indicates that wind power is the most sustainable source for electricity generation, followed by small hydropower and solar photovoltaics.     

Multi-electrode microbial fuel cell (MEMFC): A close analysis towards large scale system architecture

Microbial fuel cells are capable of producing electricity through the treatment of wastewater, however, the low power density poses main hurdles towards their wide application. In present work, microbial fuel cell based on multiple anodes, acting as baffle is constructed for achieving higher performance which can be scaled up for real life application. It is investigated for continuous sixty two days using distillery wastewater (WW) in three batches under ambient condition. During first batch, the WW is maintained under stagnant condition inside the anode chamber where as in the rest of the two batches WW is recirculated in the chamber. A maximum power density 427 mW m⁻², is achieved under stagnant condition which is further enhanced to 597 mW m⁻² under recirculation mode. Recirculation of WW reduces the internal resistance arising from the mass transfer by 50%. Maximum COD removal and Coulombic efficiency obtained is 43% and 23%. Biofouling on the surface of the membrane facing anode chamber is observed.     

Experimental and thermal analysis of energy efficient novel design wet cooling towers

Waste heat is generally dissipated from process water to atmospheric air in cooling towers. In the present study, a novel design is used to extract more amount of heat without any additional energy input by incorporating secondary ambient air in an induced draft wet cooling tower. In addition, more fresh air is induced in the tower from the rain zone, which increases the effectiveness at any value of the water to air flow rate (L/G ratio). Moreover, tower characteristics, range, and evaporation loss were also increased due to the novel design. It is noteworthy that secondary fresh air increases effectiveness, heat rejection, and tower characteristics by 10.12%, 19.65%, and 26.11%, respectively, and decreases approach by 16.32% at 0.55 L/G ratio, 44°C inlet water temperature, 29.7°C dry bulb temperature, and 18.4°C inlet air wet bulb temperature.     

Orientation-Dependent Developments in Misorientation and Residual Stress in Rolled Aluminum: The Defining Role of Dislocation Interactions

Orientation-dependent developments in misorientation and residual stress, in rolled aluminum, were quantified experimentally and simulated numerically. The latter involved analysis using a crystal plasticity finite element model, accounting for anisotropies in slip system hardening but neglecting near-neighbor interactions, and discrete dislocation dynamics of the single crystals. Both were successful in capturing the experimental patterns of orientation dependence. Numerical simulations, without slip transfer across the neighboring grains, thus established the defining role of dislocation interactions in establishing orientation-sensitive microstructural evolution.