含氧化锆的氧化物系统计算相图研究与进展

氧化锆是一种重要的高性能陶瓷材料，由于其优良的力学和电学性能。在结构陶瓷和功能陶瓷两个都有着广泛的应用前景，本文在简述计算相图发展和原理的基础上，综述了近年来对含氧化锆系统计算相图的研究，总结了一些重要体系的研究结果，提出计算相图方法将对该系统材料的组分设计起重大的促进作用。     

Smart structures and their applications on active vibration control: Studies in the Department of Aerospace Engineering, METU

This work presents the theoretical and experimental studies conducted in Aerospace Engineering Department of Middle East Technical University on smart structures with particular attention given to the structural modelling characteristics and active suppression of in-vacuo vibrations. The smart structures considered in these analyses are finite and flat aluminium cantilever beam-like (called as smart beam) and plate-like (called as smart fin) structures with surface bonded lead–zirconate–titanate patches. Finite element models of smart beam and smart fin are obtained. Then the experimental studies regarding open loop behaviour of the structures are performed by using strain gauges and laser displacement sensor to determine the system models. Further studies are carried out to obtain H _∞ and μ-synthesis controllers which are intended to be used in the suppression of free and forced vibrations of the smart structures. It is observed that satisfactory attenuation levels are achieved and robust performance of the systems in the presence of uncertainties is ensured. In that respect a comparative study involving H _∞ and sliding mode controls is also conducted. Recently, the studies involving aerodynamic loading are also gathering pace.     

On the wind energy resources of Sudan

The imminent exhaustion of fossil energy resources and the increasing demand for energy were the motives for those reasonable in Sudan to put into practice an energy policy based on rational use of energy; and on exploitation of new, and renewable energy sources. After 1980, as the supply of conventional energy has not been able to follow the tremendous increase of the production demand in rural areas of Sudan, a renewed interest for the application of wind energy has shown in many places. Therefore, the Sudanese government began to pay more attention to wind energy utilisation in rural areas. Because the wind energy resource in many rural areas is sufficient for attractive application of wind pumps, and as fuel is insufficient, the wind pumps will be spread on a rather large scale in the near future. Wind is a form of renewable energy, which is always in a non-steady state due to the wide temporal and spatial variations of wind velocity. A number of years worth of data concerning wind speed in Sudan have been compiled, evaluated and presented in this article. The need for the provision of new data stations in order to enable a complete and reliable assessment of the overall wind power potential of the country is identified and specific locations suggested. This paper presents the background and ideas of the development of the concept as well as the main results, and experience gained during ongoing project up to now. In Sudan, various designs of wind machines for water pumping have been developed and some designs are presently manufactured commercially. Results suggest that wind power would be more profitably used for local-and small-scale applications especially for remote rural areas. It is concluded that Sudan is blessed with abundant wind energy.     

Deposition and Characterization of Si Substituted Cu2ZnSnS4 Thin Films

Silicon - The influence of the Si substitution ratio on the structural, morphological, and optical properties of Cu2ZnSnS4 (CZTS) thin films was examined. The Cu2Zn(SixSn1–x)S4 thin films...     

Densification of alumina by SPS and HP: A comparative study

In this study, the densification of alumina by spark plasma sintering (SPS) was investigated and compared to conventional hot pressing. It was shown that SPS is very effective in the sintering of alumina leading to higher densities and allows to work at lower temperatures and with shorter sintering cycles. The effect of the heating rate is dependent on the heating mode (SPS or HP). The identification of active sintering mechanisms was attempted by an isothermal and an anisothermal methods, showing that other mechanisms probably related to electrical effects enhance the densification. We suggest the higher contribution of surface diffusion mainly during the initial stage of sintering and an influence of the presence of impurities segregated at the grain boundaries. They could create conductive layers and also introduce ions with a lower valence than Al³⁺; defects are created in the surface layers and the diffusion of the species is increased.     

Sewer System Design Using Simulated Annealing in Excel

An optimization procedure has been developed for branching storm and sanitary sewer systems with a pre-determined layout for determining the minimum total cost. The model was developed within Microsoft Excel using simulated annealing as the optimization procedure. The total cost of the storm sewer system that was obtained with this optimal design procedure was compared to the total cost of the system as obtained from the conventional straight slope design procedure. Applying the simulated annealing optimizer to the design of the branching storm sewer network resulted in a cost savings of over $77,100 or about 7 % (a reduction from $1,117,700 to $1,040,600). These significant savings were realized by simply going an extra step and implementing an optimization technique during the design phase. Use of Excel should enhance the availability and the usage of such an optimization model for the design of storm and sanitary sewer systems by consulting engineers and various agencies.     

Mesoscopic nonequilibrium thermodynamics treatment of the grain boundary thermal grooving induced by the anisotropic surface drift diffusion

A systematic study based on the self-consistent dynamical simulations is presented for the grain boundary thermal grooving problem by strictly following the irreversible thermodynamic theory of surfaces and interfaces with singularities [T. O. Ogurtani, J. Chem. Phys. 124, 144706 (2006)]. This approach furnishes us to have auto-control on the otherwise free-motion of the grain boundary triple junction without presuming any equilibrium dihedral (wetting) angles at the edges. The effects of physicochemical properties and the anisotropic surface diffusivity on the transient grooving behavior, which takes place at the early stage of the scenario, were considered. We analyzed the experimental thermal grooving data reported for tungsten in the literature, and compared them with the carried simulation results. This investigation showed that the observed changes in the dihedral angles are strictly connected to the transient behavior of the simulated global system, and manifest themselves at the early stage of the thermal grooving phenomenon.     

Fabrication of textured alumina by orienting template particles during electrophoretic deposition

(0 0 1)-Textured α-alumina has been processed by electrophoretic deposition (EPD) and templated grain growth. The mechanism of platelet template orientation during EPD was examined with respect to the impact of the electric field force, gravity and hydrodynamic force in two different deposition cells with vertically or horizontally positioned deposition electrodes. A sharp (0 0 1) ‘fibre texture’ was obtained after templated grain growth during sintering of a deposit formed from a stirred 5 vol% platelet containing suspension in a vertical deposition cell. The texture was characterized by means of the Lotgering factor, texture index and electron backscattering diffraction (EBSD).     

Cost assessment of concrete and steel types for office buildings: An exploratory study

This paper presents a set of regression models which incorporates concrete and steel types in modeling the costs of office buildings. To these ends, three typical office buildings with seven and 15 stories have been designed by the help of a commercial software taking into account the Turkish practice. In each project C-16, C-20, C-25, C-30 and C-35 concrete classes and S-220 and S-420 steel types were used for dimensioning purposes. Rough construction costs were then calculated for different combinations of concrete classes and steel types. The findings of the study revealed that column dimensions decrease following an increase in a particular concrete class. However, this decrease stops after C-30. Furthermore, an average cost difference of 16% was observed between the steel types S-220 and S-420.     

Coordinated discharge of a collection of batteries

Collections of batteries are used to supply energy to a variety of applications. By utilizing the energy in such a collection efficiently, we can improve the lifetime over which energy can be supplied to the application. We say that the discharge of a collection of batteries is coordinated when, at the end of discharge, the difference in the remaining capacity of individual batteries is small. This paper presents a decision-maker based on a goal-seeking formulation that coordinates the discharge of a collection of batteries. This formulation allows us to use a simple battery model and simple decision-making algorithms. We present results from MATLAB simulations that demonstrate the performance of the decision-maker when energy is drawn out of the collection in three different discharge scenarios. The new decision-maker consistently improves the discharge efficiency obtained using scheduling methods. Our results show that when the discharge is coordinated, the lifetime of the collection is extended.