Growth and characterization of Ni:DLC composite films using pulsed laser deposition technique

The structure and surface morphology of Ni-incorporated diamond like carbon (Ni:DLC) films have been investigated. These films were deposited on Si substrates using pulsed laser deposition (PLD) technique. A KrF Excimer laser (λ = 248 nm) was used for co-ablation from multi component Ni–graphite target. The concentration of Ni was varied by ablating the Ni part of the target with various numbers of laser pulses. The SEM and AFM analysis reveals that the surface is composed of segregates of Ni which increases with the increase in Ni content during the growth process. The structural investigations by XRD and Raman spectroscopy provided information about the orientation of the incorporated constituent and the ordering of the carbon species. Maximum height of the nano structures which were observed on the surface was ∼50 nm. The G-peak of the graphite was shifted towards higher wave number due to enhancement in SP² sites which have been increased due to the increase in the Ni concentration. A small change in the surface roughness ranging from 7.78 nm to 13.1 nm due to increased Ni concentration was also observed.     

Node pacing for small optical RAM-buffered packet-switching networks

One of the difficulties with optical packet switched (OPS) networks is buffering optical packets in the network. The only available solution that can currently be used for buffering in the optical domain is using long fiber lines called fiber delay lines (FDLs), which have severe limitations. Moreover, the research on optical RAM presently being done is not expected to achieve a large capacity soon. However, the burstiness of Internet traffic causes high packet drop rates and low utilization in very small buffered OPS networks. We therefore propose a new node-based pacing algorithm for decreasing burstiness. We show that by applying some simple pacing at the edge or core backbone nodes, the performance of very small optical RAM buffered core OPS networks with variable-length packets can be notably increased.     

An experimental and three-dimensional numerical study of natural convection heat transfer between two horizontal parallel plates

In this study, experimental and three-dimensional numerical studies were performed to investigate the effects of plate spacing and temperature difference on natural convection between isothermally heated upward-facing lower horizontal plate and externally insulated horizontal upper plate. Air is used as the heat transfer medium. Rayleigh number varied in the 1108–2.339 × 10⁵ range. Several numerical simulations for three-dimensional steady laminar and turbulent flows heat transfer were carried out using a commercial CFD code Fluent 6.2. Results have shown that there is a good agreement between the numerical and present experimental results as well as with available data in literature.     

Challenges in Developing a Bessel-Beam Based Ultrafast Ablation Probe

Instruments and Experimental Techniques - With its elongated depth of focus, Bessel beams offer rapid and high aspect ratio ablation capability, in contrast to Gaussian beam counterparts. In this...     

IGNITION DELAY CHARACTERISTICS OF SOME TURKISH VEGETABLE OIL-DIESEL FUEL BLENDS

Vegetable oils have chances to be used in Diesel engines as alternative fuels contributing to the solution of some agricultural, environmental and economical problems. Direct use of them has some technical problem yet but as blended fuels with diesel fuel or esters they have places on the application area. In this paper the effect of the compression ratio on ignition delay is investigated in an ASTM-CER engine working with four different types of vegetable oil of Turkish origin (sunflower, corn, soybean, and olive oil) blended with grade No.2-D diesel fuel at a ratio of 20/80 (v/v) and the results are compared with baseline diesel fuel. Longer ignition delay periods have generally been obtained for blend fuels ranking from olive oil to sunflower oil as compared to diesel fuel.     

Ranging Accuracy in Dynamic Spectrum Access Networks

Theoretical analysis of time-of-arrival (TOA)-based high-precision ranging algorithm for the dynamic spectrum access networks (DSANs) is performed. The asymptotic frequency-domain Cramer-Rao bound (CRB) of the ranging algorithm that takes the frequency-dependent feature (FDF) and phase of multipath components (MPCs) into account is derived through Whittle formula. The effects of FDF-MPCs and related parameters such as absolute bandwidth and operating center frequency on the ranging accuracy are investigated. The results show that the impacts of the FDF-MPCs on the ranging accuracy can be significant and it is recommended utilizing as large absolute bandwidth as possible at low operating center frequencies to obtain high-precision distance information of the users in the DSANs     

Weighted averaging for denoising with overcomplete dictionaries.

We consider the scenario where additive, independent, and identically distributed (i.i.d) noise in an image is removed using an overcomplete set of linear transforms and thresholding. Rather than the standard approach, where one obtains the denoised signal by ad hoc averaging of the denoised estimates provided by denoising with each of the transforms, we formulate the optimal combination as a conditional linear estimation problem and solve it for optimal estimates. Our approach is independent of the utilized transforms and the thresholding scheme, and as we illustrate using oracle-based denoisers, it extends established work by exploiting a separate degree of freedom that is, in general, not reachable using previous techniques. Our derivation of the optimal estimates specifically relies on the assumption that the utilized transforms provide sparse decompositions. At the same time, our work is robust as it does not require any assumptions about image statistics beyond sparsity. Unlike existing work, which tries to devise ever more sophisticated transforms and thresholding algorithms to deal with the myriad types of image singularities, our work uses basic tools to obtain very high performance on singularities by taking better advantage of the sparsity that surrounds them. With well-established transforms, we obtain results that are competitive with state-of-the-art methods.     

The effect of etomidate induction on plasma cortisol levels in children undergoing cardiac surgery

Loyalty to one's extended family, a well-known Japanese tradition, has broken down following World War II. Child rearing in Japan, therefore, has been changing gradually and clearly. Traditionally, child rearing was taught to young mothers by the grandmothers. However, recently young couples are no longer living with their parents. Therefore, there are no advisers nor consultants available at home for their child rearing. Commercialism has certainly invaded the field of child rearing, including too many guidebooks and even baby-sitting companies. Children's lives have become much more competitive, busy and unnatural in comparison with those of 20-30 years ago. This might be one cause of the increased incidence of bullying, school phobia and psychological disorders in children.     

Ozonation of synthetic versus natural textile tannins: recalcitrance and toxicity towards Phaeodactylum tricornutum.

A sound in-plant pollution control strategy can only be defined by paying due attention to bio-recalcitrance and toxicity. In this context the levels of toxicity and inert COD introduced to textile dyebath discharges by two alternative auxiliary chemicals, namely natural tannin (NT) and synthetic tannin (ST), were investigated. The effect of 40 minutes ozonation at 1,000 mg h(-1) at pH 3.5 on the segregated effluent streams containing the above-mentioned tannin formulations was evaluated in terms of changes in toxicity and recalcitrance. The effect of ozonation on the COD distribution of raw and ozonated NT and ST samples according to their molecular weight cut-offs was also assessed. Both untreated tannin formulations exerted high acute toxicity towards marine microalgae Phaeodactylum tricornutum. Moderate decrease in the toxicity levels of both tannins was observed upon ozonation. The raw NT formulation with a COD content more than twice that of its alternative raw ST had an initially inert soluble COD content of only 25 mg/L, while the initially inert COD was 135 mg/L for ST. As the initially inert soluble COD content of NT was considerably lower, this textile auxiliary did not need chemical pretreatment to improve its biodegradability. On the other hand, the initially inert soluble COD content of ST was reduced by 70% by ozone pretreatment. In terms of residual COD contents achievable after passing through a biological treatment system, raw NT and pretreated ST formulations yielded 100 and 95 mg/L COD, respectively. The highest proportion of COD (46% for NT and 88% for ST) was found in the <1 kDa range. The same fraction increased to 93% for NT after ozonation, while for ST no significant change was observed in the COD distribution of the molecular weight cut-offs after ozonation.