Utility of Albicans ID plate for rapid identification of Candida albicans in clinical samples. Rapid identification of Candida albicans

A clinical study was carried out in an attempt to assess the efficacy of a newly designed electric toothbrush compared to a conventional manual toothbrush using the American Dental Association's protocol for evaluating toothbrushes. An Oral-B 35 manual toothbrush, which served as the control, was compared to the Plaq & White125 electric toothbrush. Examinations were performed by two calibrated examiners at baseline, day 15 and day 30. Examinations included the gingival index, plaque index and bleeding index. Mean indices were calculated and compared between the two brushes using the repeated measures multiple analysis of variance. No statistically significant differences between the mean indices on the three examination days were observed following the use of the manual or the electric toothbrushes. The results of this study demonstrate that the electric toothbrush was numerically more effective than the manual toothbrush in reducing supragingival plaque levels, either before or after brushing, at each examination date compared to baseline plaque values. However, this difference was not statistically significant. This and other findings concluded that the Plaq & White toothbrush is comparable to the control ADA-accepted toothbrush.     

Heat transfer and pressure drop in a new type of corrugated channels

An experimental investigation of heat transfer and pressure drop from a new type of corrugated channels is presented. The investigation has been carried out for Reynolds numbers in the range of $\text{800 <}\text{Re}\text{< 5000}$ for one corrugated and one smooth channel. It is found that the heat transfer from the corrugated channel is up to 3.5 times higher than for the smooth one. The pressure drop is however large (5 – 6 times the value of a smooth channel) and it is suggested that the corrugation height and length should be altered in order to balance the increases in heat transfer and pressure drop.     

Polylactide films formed by immersion precipitation: Effects of additives,nonsolvent, and temperature

The influence of nonsolvent, crystallinity of the polymer film, and addition of dodecane (a poor solvent for the polymer and for the nonsolvent) on the morphology of polylactides films has been investigated and was related to phase separation behavior. Both amorphous poly‐DL ‐lactide (PDLLA) and crystalline poly‐L ‐lactide (PLLA) were dissolved in dichloromethane, and subsequently films were made by immersion in nonsolvent baths. PDLLA gave dense films without any internal structure, since the structure was not solidified by crystallization or glassification. PLLA films show varying structure depending on the nonsolvent. With methanol, asymmetric morphologies were observed as a result from combined liquid‐liquid demixing and crystallization, while with water symmetric spherulitic structures were formed. As a next step, dodecane was added, which is not miscible with the nonsolvent, and we found it to have a strong influence on the morphology of the films. The PDLLA films with dodecane did not collapse: a closed cell structure was obtained. In PLLA films, dodecane speeds up phase separation and induces faster crystallization in the films, and the porosity, size of the pores, and interconnectivity increased. When the PLLA solutions were subjected to a heat pretreatment, crystallization could be postponed, which yielded a cellular structure around dodecane, which did not contain spherulites anymore. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 959–971, 2007     

Determination of the solubility parameter of poly(ethylene oxide) at 25°C by gas-liquid chromatography

The solubility parameter of poly(ethylene oxide) at 25°C has been determined using the method developed by DiPaola-Baranyi and Guillet, by the extrapolation of the values of the interaction parameter χ, at high temperatures, ranging from 70°–90°, 90°–110° and 110°–130°C down to 25°C. The values of the solubility parameter obtained, depending on the temperature ranges employed, are 9.8, 9.9 and 10.1, respectively.     

Surface Areas of Nitrated Hydrotalcites

Hydrotalcites in the nitrate form were prepared using microwave irradiation in the hydrotreatment step. The surface area (BET) of nitrated hydrotalcites was evaluated. Solids were characterized by atomic absorption, X-ray diffraction and BET analysis. Thermal pretreatment temperature determined the surface area of the hydrotalcites.     

Near-Surface Deformation in an Alumina–Silicon Carbide-Whisker Composite due to Surface Machining

Deformation due to two different surface-machining conditions—grinding (126 μm diamond) and polishing (3 μm diamond)—in an uniaxial hot-pressed Al₂O₃–30%-SiC-whisker composite has been investigated. A Warren–Averbach analysis of grazing incidence X-ray diffractometry data shows that the deformation is localized to the very top surface zone. The cell size and the root mean square of the strain show a gradient in the deformed layer. Transmission electron microscopy studies, in cross-sectional view, also show a near-surface deformation zone containing dislocations, twins, and cracks. This is seen for both machining procedures, but the depth of the zone and the degree of deformation, in terms of dislocation density and number of cracks, is much higher in the roughly ground specimen than in the polished one. For comparison, a monolithic Al₂O₃ sample also has been studied after grinding. The deformation zone is very similar to the Al₂O₃–SiC sample with the same grinding condition, but cracks and dislocations are present at a slightly larger depth. The deformation depth for the polished Al₂O₃–SiC sample is ∼50 nm. In the ground Al₂O₃–SiC sample, the deformation depth is 1–1.5 μm and corresponds to the grain size. The deformation zone in the ground monolithic Al₂O₃ sample is 1.5–2 μm deep. The observed grain-boundary cracks are almost parallel to the surface and may originate from nonaccommodated plastic flow between grains.     

Parameter Identification in Photothermal Imaging

We propose a technique to reconstruct the geometry of inclusions and their material parameters in thermal scattering near surfaces. The imaging problem is reformulated as a constrained optimization problem with a finite number of stationary constraints. The unknown domains and their parameters are the design variables. A descent method combining topological derivative analysis to find improved guesses of the objects and gradient iterations to correct their material parameters provides reasonable reconstructions.