通过直接栅电流测量研究PMOSFET's热载流子损伤

通过直接栅电流测量方法研究了热载流子退化和高栅压退火过程中PMOSFET's热载流子损伤的生长规律.由此,给出了热载流子引起PMOSFET's器件参数退化的准确物理解释.并证明了直接栅电流测量是一种很好的研究器件损伤生长和器件参数退化的实验方法.     

转运站框架式厂房的爆破拆除

合山电厂转运站待拆五层钢筋混凝土框架式厂房西侧与被保护的引风机房相隔仅 0 3m ,北侧与工具房相连 ,南侧与需要保护的油池相邻。爆破切口布置在二层 ,并把最后一排柱的爆破部位提高到引风机房顶部以上 0 5m处 ,避免了后坐对引风机房的影响。通过预处理 ,将厂房与工具房分离。架设防护结构 ,阻挡飞石 ,保护了油池。文中介绍了爆高和爆破参数的选择、预处理、起爆破网路设计和安全防护措施。     

AN EXTENDED MODELING OF TIDE-WAVE MOTION

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＴｏｓｔｕｄｙｔｈｅｍｏｔｉｏｎｏｆｔｈｅｔｉｄｅ ｗａｖｅｓ,ｔｈｅｓｈａｌｌｏｗｗａｔｅｒｅｑｕａｔｉｏｎｓ ,ｉ.ｅ .ｔｈｅｖｅｒｔｉｃａｌｉｎｔｅｒｇｒａ ｔｉｏｎｏｆｔｈｅｃｏｎｔｉｎｕｉｔｙｅｑｕａｔｉｏｎａｎｄｍｏｍｅｎｔｕｍｅｑｕａ ｔｉｏｎ ,ｉｓｃｏｎｓｉｄｅｒｅｄａｓｔｈｅｇｏｖｅｒｎｉｎｇｅｑｕａｔｉｏｎｓ.Ｂｙａｂｏｖｅｅｑｕａｔｉｏｎｓｔｗｏｅｑｕａｔｉｏｎｓｒｅｌａｔｅｄｔｏｔｈｅｈｏｒｉｚｏｎ ｔａｌｆｌｕｘｏｆｔｈｅｔｉｄｅ ｃｕｒｒｅｎｔｓａ…     

交联型聚醚聚氨酯的表征、力学性能及其碱金属盐络合物的导电性能

采用三羟甲基丙烷（ＴＭＰ）作交联剂与聚乙二醇（ＰＥＯ－１５４０）和甲苯二异氰酸酯（ＴＤＩ）反应，得到了具有较好力学性能的交联型聚醚聚氨酯（ＰＥＵ），该聚合物与ＬｉＣｌＯ４的结合物具有较高的室温电导率（σ３０℃＝１．８７×１０￣（－４）Ｓ／ｃｍ）。采用全反射红外光谱（ＡＴＲ－ＩＲ）对聚合物的结构进行了表征。对聚合物的组成、不同ＴＤＩ类型及络合盐浓度对聚合物力学性能及其络合物电导率的影响进行了探讨。低度交联聚合物的络合物，其电导率与温度的关系符合建立在自由体积理论上的ＶＴＦ方程，表明络合物中离子的传导主要是在无定形区域进行，与自由体积有关。     

npn AlGaN/GaN HBT模型与特性分析

基于实验数据对GaN材料的少子寿命和碰撞电离率进行了建模,应用漂移-扩散传输模型开展了npnAlGaN/GaN异质结双极晶体管的特性研究,给出了器件导通电压、偏移电压和饱和电压的解析式.结果表明:实际器件导通电压、偏移电压及饱和电压较大的原因主要是高基区电阻和基区接触的非欧姆特性,为器件的工艺制造提供了理论指导.     

Development of a low cost microwave mixer using a broad-band substrate integrated waveguide (SIW) coupler

A low cost single-balanced mixer is designed using a newly designed 90/spl deg/ substrate integrated waveguide (SIW) 3-dB coupler, which takes the advantages of low cost, low profile, and high performance. An X-band single-balanced SIW mixer is designed and fabricated with a standard printed circuit board process. Measured conversion loss of 6.8dB and the wide-band response from 8.5 to 12GHz are presented.     

MCM用氮化铝共烧多层陶瓷基板的研究

通过实验优化AlN(氮化铝)瓷料配方及排胶工艺,对共烧W(钨)导体浆料性能及AlN多层基板的高温共烧工艺进行了研究,并对AlN多层基板的界面进行了扫描电镜分析。采用AlN流延生瓷片与W高温共烧的方法,成功地制备出了高热导率的AlN多层陶瓷基板,其热导率为190 W/(m·K),线膨胀系数为4.6106℃1(RT~400℃),布线层数9层,W导体方阻为9.8 m,翘曲度为0.01 mm/50 mm,完全满足高功率MCM的使用要求。     

高硬度耐磨电弧喷涂管状丝材的研究

利用自熔性合金与非晶态材料的特点，研制了Fe—B系管状丝材作为电弧喷涂材料，其形成的涂层具有良好的结合强度、低的孔隙率、高的硬度和耐磨损性能。     

������ʧ��

��This work gives the concept about oil-cut,gas-cut, kick,grave kick,blowout and failure in controlling blowout and summarizes the type of failure in controlling blowout,the objective and man-made reasons causing blowout and the measures to prevent and control well blowout.     

Induction of immune tolerance with heart-thymus composite allotransplantation in rats

Objective To study on the role of thymus transplantation for heart allograft in rats. Methods Vascularized heart-thymus combined transplantation was performed with microsurgical technique. Graft survival, histopathology, level of IL-2, IL-4 and its mRNA expression in serum and cardiac grafts were investigated. Results Heart-thymus combined transplantation achieved effect in the prolongation of cardiac graft survival with short-term administration of cyclosporine. Conclusions Vascularized thymus transplantation induced immune tolerance in thymectomized rats.