Spot welding of metal laminated composites

Composite materials of steel sheets joined by interlayers of zinc or lead- tin, show very good impact and corrosion resistance properties. Resistance spot-weld characteristics of these composite materials made of steel sheets and non-ferrous metals have been tested. Spot welds of composites with both zinc and lead- tin interlayers present good behaviour in peeling tests. Shear tests of the welds also show very high strength, probably as a consequence of simultaneous brazing because of the alloyed layer of non-ferrous material around the weld spot. This good welding behaviour enhances the possibilities of application of this composite.     

Effects of fluoropolymer addition to an epoxy on scratch depth and recovery

Samples were prepared by addition of a fluorinated poly(aryl ether ketone) (12F-PEK) to a commercial epoxy resin and curing at either 24 °C or 70 °C. The concentrations of fluoropolymer in the samples were 0, 5, 10, 20, 30, 40, and 50%. Phase inversion facilitates the formation of more and more smooth surfaces for scratch testing with increasing fluoropolymer concentration. A progressively increasing load from 0.03 N to 12 N was administered with a diamond tip to the surfaces of the samples; depths were determined within ±7.5 nm. The original scratch depth is a function of the fluoropolymer concentration. Scratch recovery (healing) reaches values up to 95%. Plots of the residual depth versus concentration of the fluoropolymer at 4, 6, 8, and 10 N reveal minima for all forces and both temperatures. Addition of only 5% or 10% 12F-PEK improves the scratch recovery significantly. The results are explained by changes of material morphology with the fluoropolymer concentration. Electronic Publication     

Fabrication of Arsenic Sulfide Optical Fiber with Low Hydrogen Impurities

Arsenic sulfide glass optical fibers typically possess extrinsic absorption bands in the infrared wavelength region associated with residual hydrogen and oxygen related impurities, despite using purified precursors. We report a purification process based on the addition of tellurium tetrachloride (TeCl₄) to the glass. During melting, the chlorine from TeCl₄ reacts with the hydrogen impurities to produce volatile products (e.g., HCl) that can be removed by subsequent dynamic distillation. The processing conditions have been modified accordingly to produce optical fibers with significantly reduced loss due to hydrogen sulfide impurity content (1.5 dB/m).     

Laser welding of Al55-Zn coated steel sheet

A study has been made of the procedures used for the lap and butt welding of 0.62 and 1.16 mm thickness steel sheets coated with Al55-Zn alloy, using laser-beam technology. The main problems arise in lap welding as a result of zinc evaporation from the coating. The vapour pressures of this element lead to cratering and blistering of the welds which are visible from the external surface and imply severe weld defects. An efficient solution to this problem consists in leaving a gap between the internal faces, thus allowing the zinc vapours to escape. Excessive gaps, however, lead to the molten metal collapse and to lack of penetration. In the present work, acceptable results were obtained with a maximum interface separation of 0.1 mm. This allows excellent continuity of the joints, without cracks, pores or non-metallic inclusions and with moderate hardnesses, thus demonstrating the good laser weldability of the coated material. A difficulty arises, however, in relation to the coating in zones close to the weld. In these high-temperature zones the coating is lost, and in the immediately adjacent areas the coating microstructure and phases are altered, as was shown by scanning electron microscope analyses.     

Seasonal differences in neonatal jaundice

Cytomegalovirus is the main agent of congenital viral infections. The aim of this study was to compare the incidence of congenital cytomegalovirus infections of two groups of newborns of differing socioeconomic status. Cytomegalovirus was isolated from urine or oropharingeal secretions in 218 children born in a private clinic and 471 born in a public hospital. Positive viral isolates were confirmed with indirect immunofluorescence using monoclonal antibodies. Infection was detected in 12 children (1.82%), four coming from the private clinic (1.86%) and 8 coming from the public hospital (1.81%). Ninety two percent of infected children were asymptomatic. Urine and oropharingeal secretion samples had the same yield for viral isolation. It is concluded that the incidence of congenital cytomegalovirus infection is similar to that described in developed countries.     

Correlation between magnetic hysteresis and magnetic relaxation in YBaCuO single crystals

The dependence of the magnetic momentm obtained from the hysteresis loops on the speed of the magnetic field sweep =dH _ext/dt is explained on the basis of Anderson's interpretation of the magnetic flux creep. In addition, a phenomenological model is suggested which predicts a linear dependence ofm on ln with the slope m/ ln , numerically equal to the relaxation rate m/ ln(t) from the usual magnetic relaxation. Such linear relations betweenm and ln were observed experimentally in single crystals of YBaCuO. Preliminary experiments on the complementary time dependent relaxation ofm after a simulated step change ofH _ext gave mostly relaxation rates close to the predicted values. The model here presented also enables one to compare the critical state in the superconductor at a field sweep rate with the critical state at some timet _eff after a step change ofH _ext. The values of analyzed in our experiments actually correspond to the critical state at timest _eff between0.04 and4 sec after an imaginary large step change ofH _ext.     

GPU accelerated waterpixel algorithm for superpixel segmentation of hyperspectral images

The Journal of Supercomputing - The high computational cost of the superpixel segmentation algorithms for hyperspectral remote sensing images makes them ideal candidates for parallel computation....