Synthesis,Characterization and Evaluation of the Surface Active Properties of Novel Cationic Imidazolium Gemini Surfactants

New imidazolium gemini surfactants were synthesized by reaction of epichlorohydrin with long chain fatty alcohols furnishing products 2-(alkoxymethyl)oxirane followed by their subsequent treatment with imidazole resulting in the formation of 1-(1H-imidazol-1-yl-3 alkoxy)propane-2-ol which on subsequent treatment with 1,2-dibromoethane and 1,3-dibromopropane resulted in the formation of title gemini surfactants:1,2-bis(1(3-alkoxy-2-hydroxypropyl)-1H-imidazol-3-ium)ethane bromide (7), 1,3-bis(1(3-alkoxy-2-hydroxypropyl)-1H-imidazol-3-ium)propane bromide (8), 1,2-bis(1(3-alkoxy-2-hydroxypropyl)-1H-imidazol-3-ium)ethane bromide (9), 1,3-bis(1(3-alkoxy-2-hydroxypropyl)-1H-imidazol-3-ium)propane bromide (10), 1,2-bis (1(3-alkoxy-2-hydroxypropyl)-1H-imidazol-3-ium)ethane bromide (11) and 1,3-bis (1(3-alkoxy-2-hydroxypropyl)-1H-imidazol-3-ium)propane bromide (12). Their identification was based on IR, ¹H-, ¹³C-NMR, DEPT, COSY and mass spectral studies. Their surface active properties were also evaluated on the basis of surface tension and conductivity measurements.     

Qualitative Evolution of Asymmetric Raman Line-Shape for NanoStructures

A qualitative evolution of an asymmetric Raman line-shape function from a Lorentzian line-shape is discussed here for application in low dimensional semiconductors. The step-by-step evolution reported here is based on the phonon confinement model which is successfully used in literature to explain the asymmetric Raman line-shape from semiconductor nanostructures. Physical significance of different terms in the theoretical asymmetric Raman line-shape has been explained here. Better understanding of theoretical reasoning behind each term allows one to use the theoretical Raman line-shape without going into the details of theory from first principle. This will enable one to empirically derive a theoretical Raman line-shape function for any material if information about its phonon dispersion relation, size dependence, etc., is known.     

Mode shapes and frequencies of radially symmetric vibrations of annular sandwich plates of variable thickness

An analysis and numerical results of radially symmetric vibrations of annular sandwich plates with core of linearly varying thickness are presented. The face sheets are treated as membranes of constant thickness, and the core is assumed to be solid as well as moderately thick. Due to linear thickness variation in the core, the face sheets take the shape of a truncated conical shell and because of this the face sheets membrane forces contribute to the bending and transverse shear of the core of the sandwich plate. Keeping this in view, the equations of motion for such a plate are developed by Hamilton’s energy principle. The frequency equations for three different combinations of boundary conditions, namely clamped at the inner edge and clamped or simply supported or free at the outer edge, are obtained by employing the differential quadrature method. The lowest three roots of these frequency equations have been reported as the frequencies for the first three modes of vibration. The effect of various plate parameters such as taper parameter, thickness of the core at the center, face thickness, and radii ratio on the natural frequencies has been analyzed. Three-dimensional mode shapes for a specified plate for all the three boundary conditions are illustrated. A comparison of results is presented.     

Stochastic post buckling analysis of laminated composite cylindrical shell panel subjected to hygrothermomechanical loading

In this paper, the effect of random system properties on the post buckling load of geometrically nonlinear laminated composite cylindrical shell panel subjected to hygrothermomechanical loading is investigated. System parameters are assumed as independent random variables. The higher order shear deformation theory and von-Karman nonlinear kinematics are used for basic formulation. The elastic and hygrothermal properties of the composite material are considered to be dependent on temperature and moisture concentration using micromechanical approach. A direct iterative based C⁰ nonlinear finite element method in conjunction with first-order perturbation technique proposed by present author for the plate is extended for shell panel subjected to hygrothermomechanical loading to compute the second-order statistics (mean and variances) of laminated composite cylindrical shell panel. The effect of random system properties, plate geometry, stacking sequences, support conditions, fiber volume fractions and temperature and moisture distributions on hygrothermomechanical post-buckling load of the laminated cylindrical shell panel are presented. The performance of outlined stochastic approach has been validated by comparing the present results with those available in the literature and independent Monte Carlo simulation.     

Analysis of Dielectric and Electro-optic Responses of Nanomaterials Doped Ferroelectric Liquid Crystal Mixture

Dielectric and rotational viscosity measurements of a multi-component ferroelectric liquid crystal mixture were performed by adding a small concentration (0.01 wt%) of silica and multi walled carbon nanotubes (MWCNTs). Liquid crystals turn out to be outstanding hosts for nanomaterials. A remarkable increase in the rotational viscosity was noticed in CNT doped system as compared to silica doped same liquid crystal system. Comparison of dielectric studies shows higher value of permittivity and dielectric losses for silica-doped sample than those of CNT doped sample. The results have been interpreted both experimentally and theoretically.     

A new method of determination of series and shunt resistances of silicon solar cells

A new method of measurement of series resistance R_s and shunt resistance R_sh of a silicon solar cell is presented. The method is based on the single exponential model and utilizes the steady state illuminated I–V characteristics in third and fourth quadrants and the V_oc–I_sc characteristics of the cell. It enables determination of values of R_sh and R_s with the intensity of illumination. For determination of R_s it does not require R_sh to be assumed infinite and realistic values of R_sh can be used. The method is very convenient to use and in the present study it has been applied to silicon solar cells having finite values of R_sh. We have found that R_sh is independent of intensity but the R_s decreases with both the intensity of illumination and the junction voltage.     

Immobilization of a human epidermal growth factor receptor 2 mimotope-derived synthetic peptide on Au and its potential application for detection of herceptin in human serum by quartz crystal microbalance

Therapeutic antibodies are antigenically similar to human antibodies and are difficult to detect in assays of human serum samples without the use of the therapeutic antibody's complementary antigen. Herein for the first time, we established a platform to detect Herceptin in solutions by using a small (<2.2 kDa), inexpensive, highly stable human epidermal growth factor receptor (HER2) mimotope-derived synthetic peptide immobilized on the surface of a Au quartz electrode. We used the HER2 mimotope as a substitute for the HER2 receptor protein in piezoimmunosensor or quartz crystal microbalance (QCM) assays to detect Herceptin in human serum. We demonstrated that assay sensitivity was dependent upon the amino acids used to tether and link the peptide to the sensor surface and the buffers used to carry out the assays. The detection limit of the piezoimmunosensor assay was 0.038 nM with a linear operating range of 0.038-0.859 nM. Little nonspecific binding to other therapeutic antibodies (Avastin and Rituxan) was observed. Levels of Herceptin in serum samples obtained from treated patients, as ascertained using the synthetic peptide-based QCM assay, were typical for those treated with Herceptin. The findings of this study are significant in that low-cost synthetic peptides could be used in a QCM assay, in lieu of native or recombinant antigens or capture antibodies, to rapidly detect a therapeutic antibody in human serum. The results suggested that a synthetic peptide bearing a particular functional sequence could be applied for developing a new generation of affinity-based immunosensors to detect a broad range of clinical biomarkers.     

Dielectric and electro-optical study of ZnO nano rods doped ferroelectric liquid crystals

Addition of Nano rods results change in the dielectric and electro-optical properties of pure Ferroelectric Liquid Crystal (FLC) considerably. The present study is devoted to characterize the dielectric and electro-optical parameters of the FLC nano rods composite system. The size of nano rods is usually much bigger than that of FLC molecules, therefore, when they are doped in different concentrations, in pure FLC, their volume fraction plays considerable role in deciding the molecular dynamics of the resultant composite system. For the lesser concentrations, the nano rods offer mechanical strength to system geometry while at higher concentration of nano rods, they offer additional constraints on the system. In present report both of these aspects have been analyzed and explained.     

From Experience with Indoor Wireless Networks: A Link Quality Metric that Captures Channel Memory

With ARQ based link-layer schemes, energy consumption on a link increases with packet retransmissions. We define the inefficiency of a link as the expected number of transmissions before a packet is successfully received on that link. Memory in the packet success process, caused by long indoor coherence times, strongly influences inefficiency. Based on measurements, we build a simple model for the packet success process that incorporates memory and predicts our metric practically and accurately. In particular, inefficiency is asymptotically linear in the memory duration when there is a nonzero probability of a deep fade, and approximately logarithmic otherwise.