Microstructural evolution during the supersolidus liquid phase sintering of nickel-based prealloyed powder mixtures

A novel concept for full-density sintering is described. Two prealloyed powders with slight compositional differences are tailored to separate the solidus temperatures into high-melt and low-melt compositions. A mixture of these two powder compositions allows full-density sintering at a temperature between the two solidus temperatures. For these experiments, the two powders were nickel-based alloys, where the low-melt powder contained boron. The mixed powders were sintered at temperatures above the solidus of the low-melt powder to form a transient liquid that promoted rapid densification of the mixture. Microstructure evolution during sintering was assisted using quenching experiments. Variables in this study included the heating rate, peak temperature, hold time, and powder ratio. Interdiffusion between the two powders controls microstructure evolution, with a dominant role associated with boron diffusion and reaction. The transient liquid phase responsible for densification is linked to boron diffusion and subsequent compound precipitation.     

A conformal cylindrical microstrip array for producing omnidirectional radiation pattern

Radiation patterns of rectangular microstrip patches arranged circumferentially on a circular cylinder have been computed. Both the axial patches and circumferential patches have been used. It has been found that the number of circumferential patches required for a given ripple in gain pattern is considerably less, thus simplifying the feed network. Comparison with experimental measurements shows good agreement.     

响应面法优化速凝型无机防水堵漏材料的配方研究

以R·SAC42.5和P·O42.5R为基料,白砂、石膏为填料,碳酸锂作促凝剂,添加干燥剂、减水剂和消泡剂,在单因素试验基础上,以材料的初凝时间为评价指标,经响应面法优化配方,制备一种环保、经济且性能优良的速凝型无机防水堵漏材料。结果表明,R·SAC42.5为180 g,P·O42.5R为40 g,白砂为35 g,碳酸锂为0.1 g的最佳用量时,材料的初凝时间为2 min,终凝时间为6 min;产品凝结快速、质地坚硬、稳定性和附着力好,完全符合国家标准规定的技术性能要求。在公路修补、建筑和地下工程的防水堵漏上实际应用前景广阔。     

Perspectives on Inhibiting β‐Amyloid Aggregation through Structure‐Based Drug Design

Targeting β‐amyloid (Aβ) remains the most desired strategy in Alzheimer’s disease (AD) drug discovery research. Many peptides that specifically target Aβ aggregates are known, encompassing efforts from both industrial and academic research settings. However, in clinical terms, not much success has been gained with peptide research; in turn, small drug‐like molecules are already globally recognized as showing promise as an alternate approach. Aβ aggregation inhibitors are the most important part of the multifunctional drug design regimen for treating AD. Unfortunately, rational drug design approaches with small molecules are still in the initial stages. Herein we highlight, update, and elaborate on the structural anatomy of Aβ and known Aβ aggregation inhibitors in hopes of helping to optimize their use in structure‐based drug design approaches toward inhibitors with greater specificity. Furthermore, we present the first review of efforts to target a previously uncharacterized region of acetylcholinesterase: the N‐terminal 7–20 sub‐region, which was experimentally elucidated to participate in Aβ aggregation and deposition.     

Assessment of groundwater depletion–induced land subsidence and characterisation of damaging cracks on houses: a case study in Mohali-Chandigarh area,India

Bulletin of Engineering Geology and the Environment - The present study identified groundwater depletion–induced land subsidence by spaceborne differential interferometric SAR (DInSAR)...     

Impact of oral vitamin D supplementation on serum 25-hydroxyvitamin D levels in oncology

Background  

Serum 25-hydroxyvitamin D [25(OH)D] is the major circulating form of vitamin D and a standard indicator of vitamin D status. Emerging evidence in the literature suggests a high prevalence of suboptimal vitamin D (as defined by serum 25(OH)D levels of <32 ng/ml) as well as an association between lower serum levels and higher mortality in cancer. We investigated the effect of oral vitamin D supplementation as a means for restoring suboptimal levels to optimal levels in cancer.     

The First Example of Saccharin‐Lithium Bromide Catalysis: Direct Synthesis of N‐Tosylimines from Alcohols

The first procedure to access N‐tosylimines directly from alcohols under mild and neutral conditions is reported. The protocol involves saccharin‐lithium bromide‐catalyzed oxidation of alcohols to aldehydes/ketones with chloramine‐T followed by their condensation with the in situ generated oxidation by‐product p‐toluenesulfonamide in the same reaction vessel to afford N‐tosylimines in 40–90% overall yields. The present work opens up a new and efficient synthetic route to N‐tosyimines directly from alcohols in a one‐pot procedure.     

Natural convection heat transfer from upward-facing plates in saline water

Saltwater or brackish water is used as a coolant in most industries. Therefore, understanding the heat transfer processes and hydrodynamics during the natural convection in saline water is crucial for enhancing the efficiency of a heat exchanger. This study elaborates on the natural convection heat transfer in saline water under atmospheric conditions. A DC power supply is used to regulate the power given to the heater in a liquid pool for thermal analysis. The pool liquid comprises solutions with varying salinity from 0%, 0.2%, 0.5%, and 2%. The effect of varying salinity on the heat transfer coefficient and the thermal aspects encountered during the desalination process is analyzed. The temperature distribution across the surface of the heater is monitored using an infrared camera. It is studied for the solution of different salinities. The heat transfer coefficient and Nusselt number are investigated during natural convection for normal water and salt solution of different concentrations. It is inferred from the study that in the regime of natural convection, there is no significant difference in the Nusselt number for normal water and saltwater for the lower value of temperature difference between the plate and pool. The heat transfer coefficient in 0.2% saline water is higher as compared to the other solutions.