Cold Model Investigations of Melting of Ice in a Gas-Stirred Vessel

The melting of steel scrap in high temperature liquid iron melt is investigated by conducting cold model experiments of the melting of ice sample of different geometries and sizes in an argon-stirred vessel containing water. The melting process of ice samples is observed using a high-speed camera. Design of experiments is based on similarity criteria. The relationships between non-dimensional groups related to heat transfer (Nu, Re, Pr, and Gr) are derived for different experimental conditions. The results are compared with those reported in the literature. The heat transfer coefficient is estimated as a function of mixing power and is found to be in good agreement with the calculated values obtained by using reported relationships in literature.     

Experimental and FE analysis of submerged arc weld induced residual stress and angular deformation of single and double sided fillet welded joint

Submerged arc welding is well-known for its very high deposition rate and thus the capability to join very high thickness metal pieces in large structural applications. Fillet joints are mostly used in structural applications which can be extensively seen in shipbuilding, bridge construction, house buildings, automobile or any other large structures. Thermal stresses generates in a fusion welded joint due to high temperature gradient, which is the cause of the residual stresses upon cooling followed by the angular deformation and failure of the welded structure. As an effect of the thermal gradient, the induced longitudinal, transverse residual stress & angular distortion can vary in single sided and double sided submerged arc welded fillet joints, during designing & manufacturing welded structures which should be taken into account. The main objective of this paper is to quantify the amount of residual stresses and angular deformation in a fillet welding joint. An elasto-plastic thermomechanical model has been developed for predicting residual stresses. A comparison of the residual stress and angular deformation between single and double sided fillet weld joint has been made. The simulation results reveal that the amount of residual stress present in the single sided fillet weld is more and unbalanced in both side of the center of weld line compared to the double sided fillet weld and the predicted results have been matched with the experiments as well as published literatures.     

The Structure And Properties of a Thermo‐mechanically Processed Low Carbon High Strength Steel

Research efforts were given towards development of low carbon high strength steels since recent past. The present study deals with the development of a low carbon high strength steel alloyed with Mn, Ni, Mo, Cu and microalloyed with Ti and Nb. The steel was subjected to three stage controlled rolling operation followed by accelerated cooling. The structure and properties of the steel at various processing conditions were evaluated. Microstructural observation reveals predominantly lath martensite along with twinned martensite structure at all processing conditions. High strength values at higher finish rolling temperatures have been obtained due to fine martensitic structure along with tiny precipitates of microalloying carbide and carbonitride. The strength value increases marginally at lower finishing temperature due to comparatively finer lath size of martensite and increased precipitation density of carbides, carbonitrides along with Cu particles. The variation in impact toughness properties at different finish rolling temperatures is found to be negligible at ambient and subambient temperatures. The formation of stable and large TiN/TiCN particles during casting have impaired the impact toughness values at ambient and at ‐40°C temperatures.     

A Functional Programming Framework for Latency Insensitive Protocol Validation

Latency insensitive protocols (LIPs) have been proposed as a viable means to connect synchronous IP blocks via long interconnects in a system-on-chip. The reason why one needs to implement LIPs on long interconnects stems from the fact that with increasing clock frequencies, the signal delay on some interconnects exceeds the clock period. Correctness of a system composed of synchronous blocks communicating via LIPs is established by showing latency equivalence between a completely synchronous composition of the blocks, and the LIP based composition. A design flow based on a synchronous composition specification, and stepwise refinement to LIP composition can be easily conceived, and a proof obligation to show latency equivalence between the synchronous specification and the refinement needs to be discharged. In this work, we propose a functional programming based framework for modeling and simulating LIP, and implement the semantics of various refinement steps in the programming model, so we can validate the LIP model against the original system within this functional programming framework. Such validation becomes easier due to the inherent denotational model of functional languages. We specifically use Standard ML to model the original system implementation as well as its latency insensitive version and compare the two by creating a model that contains both, giving them the same inputs and checking their outputs to be latency equivalent.     

Solidification/stabilization study for the disposal of pentachlorophenol

Solidification/stabilization of toxic pentachlorophenol (PCP) has been studied by using spectroscopic and electrochemical techniques. Portland type I c     

Kinetics of receptor-mediated radiotoxicity of 16alpha-[125I]-iodostradiol-3,17beta

AIM: The radiocytotoxic effects in estrogen receptor (ER) containing MCF-7 cells of a mamma carcinoma were investigated following incubation with [125I]E ranging from 1 h to 24 h. METHODS: The receptor status of the cells was confirmed by immunohistochemical staining. The accumulation of [125I]E in MCF-7 cells was tested in the presence and absence of radioinert E and [127I]E and in ER-negative cells in comparison to ER-positive cells. The subcellular distribution was investigated in 0.25 M Saccharose by ultra centrifugation. The radiocytotoxicity was assessed in ER-positive and negative cells by a standard colony forming assay after incubating with [125I]E (1.85 kBq/ml-55.5 kBq/ml) for 1, 2, 4, 8, 12, and 24 h. RESULTS: A significant cytotoxicity was observed only when ER-rich MCF-7-cells were incubated with [125I]E alone. The maximal cytotoxic effect was a reduction of survival fraction to 20-25%. This was achieved at radioactivity concentrations > 37 kBq/ml. Maximal effect was seen after 8 h incubation, extension of incubation time did not further increase toxicity. CONCLUSION: The results suggest that the radioactivity was bound to ER. Through their nuclear localization radioestrogens tagged with radionuclides emitting very low energy electrons (Auger electrons) bear potential for therapy by ER-mediated deposition of lethal doses of ionizing radiation to single cells without affecting neighbouring cells. But, instead of 125I the shorter-living 123I shall be used for labelling because the deciding radiation effectes occur within the first 8 h.     

Estimation in linear time-delay system with coloured observation noise

A sequential fixed-lag smoothing algorithm is derived here for linear systems, when it is assumed that the measurements contain the sum of signals with known time delays and are corrupted by coloured noise. The innovations approach is used to derive the algorithm that is suitable for online computations.