Effective Ozone Generation in Oxygen Using a Mesh Electrode in an Ozonizer with Variable Linear Velocity

Results of studies on ozone synthesis under discharges proceeding in a metal mesh-ceramic dielectric system have been presented. The experiments were carried out in the reactor with unique reaction space geometry, in which the reacting gas flew with consequently increasing linear velocity. The high voltage electrode was made of a metal mesh, which caused intensification of the gas mixing in the reaction space. Using a simple reactor with one-side cooling of the reaction space, high ozone maximum concentrations (100 g/Nm³) and energy efficiencies (180–200 g/kWh) were obtained at 25 °C.     

A new didactic approach to statistical analysis of measurement data for the evaluation of measurement uncertainty – “SAM–EMU”

This paper describes assumptions, aims, methodology, content and consortium make up of a European project (SAM–EMU) founded under the Erasmus Lifelong Learning Programme. The project has developed learning materials in the field of evaluation of measurement uncertainty. It is available in the form of a multimedia web based course, which has many advantages. This format is commonly accepted as a good way to prepare an EU wide vocational training vehicle. The course is available in English.     

CVD diamond layers for electrochemistry

Diamond electrodes of different morphologies and qualities were manufactured by hot filament chemical deposition (HF CVD) techniques by changing the parameters of diamond growth process. The estimation of diamond quality and identification of different carbon phases was performed by Raman spectroscopy measurements. The effect of diamond quality and amorphous carbon phase content on the electrochemical response of an obtained diamond electrode in 0.5 M H₂SO₄ as supporting electrolyte was investigated by cyclic voltammetry with [Fe(CN)₆]^4?/3? as a redox probe. The kinetic parameters such as catalytic reaction rate constant k₀ and electron transfer coefficient α were determined. The obtained results show that the analytical performance of undoped diamond electrodes can be implemented just by the change of diamond layers quality.     

Fatigue Damage of the Gesso Layer in Panel Paintings Subjected to Changing Climate Conditions

Abstract: Numerical modelling was used to follow the moisture movement and strain in a composite system – an unrestrained, single wood panel coated with a layer of gesso, in response to cyclic sinusoidal variations in relative humidity (RH). The allowable magnitude of the variations, below which physical damage of the gesso layer on the wood does not occur over a selected time of exposure, was derived as a function of cycle duration, panel thickness and moisture diffusion configuration. The dimensional response of wood substrate becomes subject to restraint by the applied layer of gesso. The panels do not respond significantly to diurnal fluctuations or shorter irrespectively of the panel thickness. The panels respond more and more significantly when the duration of the fluctuations increases until a certain critical period at which the panel fully responds to each cycle. The analysis of the data obtained indicates that moderate RH variations within the approximate range 50 ± 15% are safe. This safe range was derived using the extremes of conservative criteria of the gesso’s fatigue fracture and assumption of worst‐case wooden substrate response. The reduction of allowable amplitude of RH cycles because of decrease in the gesso’s modulus of elasticity and thickness is discussed.     

Determination of the Exciton Binding Energy Using Photothermal and Photoluminescence Spectroscopy

In this paper, experimental photoluminescence (PL) and piezoelectric photothermal (PPT) spectra of selected II–VI binary crystals are presented and analyzed. The quantitative analysis of the photothermal spectra was performed using a modified and extended Jackson–Amer model. The values of the bandgap energies of investigated semiconductors were computed from the PT amplitude and phase spectra. From the temperature dependence of the exciton emission so-called “excitonic energy gaps” have been determined. It follows from the theory that the exciton binding energy is the difference of these two values of energy gaps derived from PPT and PL spectroscopy.     

Energy Absorption by a Single Abrikosov’s Vortex in NbTi and YBaCuO Superconductors

The calculations of the absorption energy and the Q-factor of vibration of a vortex line under the effect of an external uniform harmonic force have been presented. The line tension of the vortex line and its effective mass, Magnus force, pinning force, and viscosity force were included in the equation of the dynamics. Two peaks of absorption in accordance with two modes of the oscillation spectrum were observed. The first peak of absorption is a result of flux pinning, which coincides with the De Gennes–Matricon solution in some limits. The second (high-frequency) peak is a result of a novel mode related to the effective mass of a vortex line. Temperature dependencies of absorption peaks were calculated for the NbTi and YBaCuO superconductors for orientations H∥c and H⊥c. The resonant frequency of the resonance peaks of absorption decreases with an increase in temperature. Some other peculiarities of the oscillating dynamics of the vortex line were discussed.     

Local controllability of quantum systems

We give a criterion that is sufficient for controllability of multipartite quantum systems. We generalize the graph infection criterion to the quantum systems that cannot be described with the use of a graph theory. We introduce the notation of hypergraphs and reformulate the infection property in this setting. The introduced criterion has a topological nature and therefore it is not connected to any particular experimental realization of quantum information processing.