Reproducible comet assay of amorphous silica nanoparticles detects no genotoxicity

Genotoxicity of commercial colloidal and laboratory-synthesized silica nanoparticles was tested using the single cell gel electrophoresis or Comet assay. By using a carefully developed protocol and careful characterization of the nanoparticle dispersions, Comet assays were performed on 3T3-L1 fibroblasts with 3, 6, and 24 h incubations and 4 or 40 microg/ml of silica nanoparticles. No significant genotoxicity was observed for the nanoparticles tested under the conditions described, and results were independently validated in two separate laboratories, showing that in vitro toxicity testing can be quantitatively reproducible.     

The reactions of sulfur mustard with the active components of organic decontaminants

Reactions of sulfur mustard with active components of decontaminants ORO and C9 (Polish abbreviations of organic decontaminating solutions) were studied and their products were identified by GC/AED. Quantitative determinations of individual products in the reaction mixtures allowed to evaluate the kinetic parameters of the mustard reactions. The major decontamination product was divinyl sulfide, the product of the elimination reaction. At certain proportions of mustard to the decontaminant's active component, substitution products were also formed.     

A learning-based colour image segmentation with extended and compact structural tensor feature representation

In this paper a novel Tensor-Based Image Segmentation Algorithm (TBISA) is presented, which is dedicated for segmentation of colour images. A purpose of TBISA is to distinguish specific objects based on their characteristics, i.e. shape, colour, texture, or a mixture of these features. All of those information are available in colour channel data. Nonetheless, performing image analysis on the pixel level using RGB values, does not allow to access information on texture which is hidden in relation between neighbouring pixels. Therefore, to take full advantage of all available information, we propose to incorporate the Structural Tensors as a feature extraction method. It forms enriched feature set which, apart from colour and intensity, conveys also information of texture. This set is next processed by different classification algorithms for image segmentation. Quality of TBISA is evaluated in a series of experiments carried on benchmark images. Obtained results prove that the proposed method allows accurate and fast image segmentation.     

Wetting and Interfacial Chemistry of SnZnCu Alloys with Cu and Al Substrates

Wetting of Cu and Al pads by Sn-Zn eutectic-based alloys with 0.5, 1, and 1.5 wt.% of Cu was studied at 250 °C, in the presence of ALU33® flux, with wetting times of 15, 30, 60, and 180 s, respectively. With increasing wetting time the wetting angle decreases only slightly and the angles on Cu pads are higher than those on Al pads. Selected, solidified solder-pad couples were cross-sectioned and subjected to SEM-EDS study of the interfacial microstructure. The results revealed that the microstructure of the SnZnCu/Cu interface is much different from SnZnCu/Al interface. In the first case continuous interlayers are observed while in the latter case there is no interlayer but the alloy dissolves the substrate along grain boundaries.     

Correlation between structural and electrical properties in highly porous (Y,Sr)(Ti,Nb)O3−δ SOFC anodes

In order to find a relationship between structural and electrical properties, niobium and yttrium doped SrTiO₃ ceramics were prepared via solid-state reaction. The samples were sintered in hydrogen and air conditions. The samples were also fabricated with a pore-former to obtain highly porous specimens. The electrical properties of Nb-doped SrTiO₃ samples and yttrium and niobium co-doped SrTiO₃ were compared. The comparable electrical properties were observed and discussed according to previous literature reports. It was noticed that the synthesis in a reducing hydrogen atmosphere can increase the solubility of dopants. Moreover, the samples sintered in air presented lower conductivity level and worse structural properties than the samples sintered in hydrogen. The explanation of obtained results was also suggested and discussed.     

Evolution of strength and structure during SPD processing of Ti–45Nb alloys: experiments and simulations

A β-phase Ti–45Nb alloy was processed by several severe plastic deformation (SPD) methods as high-pressure torsion, cold rolling and folding, and hydrostatic extrusion to enhance its strength by achieving an ultrafine grained structure without affecting the Young’s modulus being close to that of bone material. Mechanical properties during processing were monitored by direct torque and Vickers hardness measurements, while the micro-/nano-structural evolution was investigated by transmission electron microscopy and X-ray line profile analysis. Simulations of both mechanical and micro-/nano-structural data were performed on the basis of the SPD work-hardening model by Zehetbauer. The simulations not only found a good agreement with the deformation-specific evolution of strength and density of individual dislocations but also well reflected mesoscopic structural quantities such as the sizes of cell/grain interiors and walls without introducing additional fitting parameters.     

Review: tailoring the properties of macroporous carbon foams

Carbon foams are non-toxic, highly porous, light materials which demonstrate a wide range of properties. That fact allows carbon foams to be applied in many areas of life, ranging from electronics industry, through machinery, car and construction industry, to environmental protection. The properties of carbon foams are closely connected with their density, and its value is especially influenced by their internal structure, i.e. mainly size and number of pores, pore wall thickness and structural order of solid matrix. That is why it is possible to design the properties of carbon foams by controlling their growth. The main control factors are selecting the suitable raw material, the process parameters (temperature and pressure) and the suitable production method. Additionally, the properties of carbon foams may be modified by doping them with carbon or mineral fillers. The second method is the enrichment of carbon matrix with heteroatoms, mainly of boron and nitrogen. This paper presents the review of the possibilities of tailoring the structure and properties of carbon foams, based on the current level of knowledge available in the literature.