Analytical determination of intrinsic permeability of synthetic nonwoven filter fabrics

In this paper an analytical method for determining the permeability of nonwoven filter fabrics is presented. The derived formula shows that the intrinsic permeability, fully characterizing the porous medium, depends on fabric porosity, n, fibre diameter, d, and a shape factor determined experimentally.     

Influence of the amount of ferromagnetic addition on the rheological properties of spinning solutions,the structure,the strength,and thermal properties of polyacrylonitrile fibres

The rheological properties of spinning solutions of polyacrylonitrile in dimethyl formamide (DMF) containing various amounts of a ferromagnetic nanoaddition were investigated. The porous structure, the strength and thermal properties of fibers obtained from these solutions were assessed, as well as the uniformity of the nanoaddition distribution on the fiber surface was estimated. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Potentiometric studies of oxidation–reduction reactions with redox copolymers

Polymeric oxidants in the bead form that were macroporous styrene/divinylbenzene copolymers containing N‐chlorosulfonamide functional groups (in sodium or hydrogen form) or N‐bromosulfonamide groups (in sodium form) were synthesized and investigated to determine their oxidizing powers. The redox potentials of the N‐chlorosulfonamide/sulfonamide and N‐bromosulfonamide/sulfonamide systems were determined by potentiometric studies at different pH values with aqueous solutions of Na₂SO₃, KCN, and KSCN as reducers. The formal redox potentials of the N‐chlorosulfonamide copolymers were 0.79, 0.44, and ?0.12 V at pH's of 1.8, 8.45, and 13.6, respectively. The formal redox potential of the N‐bromosulfonamide copolymer was about 100 mV higher in comparable conditions and in solutions over pH = 5 (e.g., 0.56 V at pH = 8.56). The comparatively higher oxidizing power of the N‐bromosulfonamide copolymer was particularly evident in a strong alkaline medium (in which the N‐chlorosulfonamide copolymer was not reactive). In contrast, the N‐chlorosulfonamide copolymer showed strong oxidative properties in acidic media (in which the N‐bromosulfonamide copolymer decomposed itself). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Effect of annealing on the structure and electrical properties of sulfur-doped amorphous c-BN layers

Undoped and sulfur doped amorphous cubic boron nitride (a-cBN) layers were deposited on to silicon substrates by reactive pulse plasma (RPP) method. Subsequently they were annealed at 475, 500 and 700 K for 1 h in pure nitrogen atmosphere. In this study structural and electronic properties of unannealed and annealed layers were investigated. The results show that a consequence of annealing is formation of microstructural stable nanocrystalline cubic boron nitride film as well as substitutional location of introducedin situ donor impurities. This resulted in creation of a-cBN(n-type)-Si(p-type) heterojunction.     

Determination of porous glass surface free energy components from contact angles

The contact angles of water drops and diiodomethane drops on pellets made of controlled porosity glasses have been measured. The surface of the glasses was modified by thermal treatment at 873 K which led to an increase in the surface concentration of boron atoms. Glass modified with Carbowax 20M (polyethylene glycol) and fully hydroxylated glass have also been studied. Using the measured contact angles and modified Young equation, the dispersion and nondispersion components of the glass surface free energy have been calculated. The values show that with increasing heating time (increasing surface density of boron atoms) an increase in the surface polarity takes place. However, the polarity of the same samples decreases after treatment with Carbowax, increasingly so with higher boron atom concentrations.     

Allotropic phase transformations induced by ultraviolet power laser irradiation of graphite

Optically induced allotropic phase transformations of carbon were studied. Under irradiation with a laser beam of 337.1 nm wavelength, at an energy density of 1.9 mJ per 0.1 mm², graphite transformed into -carbin, and amorphous carbon-film transformed into rhombohedral graphite with no evidence of high-temperature effects. The transformations differ from the changes occurring due to heating alone. We suggest that the results could be explained by the one-photon excitation and recombination of electrons.     

Allotropie phase transformation induced by UV power laser irradiation of boron nitride

The optically induced allotropic phase transformations of boron nitride were studied. Under irradiation with laser beam of 337.1 nm wavelength, at energy density of 1.9mJ per 0.1 mm² a hexagonal boron nitride transformed into the cubic form. The suggestion is made that the results obtained could be explained by the multiphoton excitation and recombination of electrons.     

Sensing properties of the CB-PCV composites for chlorinated hydrocarbon vapours

The conductivity measurements of carbon black (CB)-polyvinyl chloride (PCV) composite in a tetrachloride (CCl₄), trichloromethane (chloroform, CHCl₃) or methylene chloride (CH₂Cl₂) vapour ambient have been performed. The composite contains 20% Chezacarb K2 carbon black and was prepared as a plastic strip. Based on the =f(t) dependence, three methods to determine the vapour concentration,c, are presented. The investigations could allow one to construct a CCl₄ and CHCl₃ vapour detector.     

A universal dependence for thermal conductivity of metals and dilute alloys

A universal curve relating the maximum of thermal conductivity and its respective temperature with the residual electrical resistivity has been proposed for metals and dilute alloys. Based on the equation of that curve, a comparative analysis of selected literature data of thermal conductivity of metals, which have residual electrical resistivity in the range 10^–11<₀<10^–5. cm, have been performed. Using the data for 33 metals, confirmation of the Wiedemann-Franz law for the impurity component/T of thermal conductivity was obtained, which means that _th/_el1, where _th and _el are the parameters of the electron-lattice defect interaction obtained from measurements of thermal and electrical conductivity, respectively. Examples of the failure of the Wiedemann-Franz law are also presented, exhibiting the values of _th/_el in the range 0.16 to 25. Measurements of thermal conductivity in the range 2 to 20 K and determination of the residual electrical resistivity for the samples of Cd doped with Zn and quenched were performed, resulting in values _th/_el1.     

Spreading of a water drop on a marble surface

Measurements of the wetting contact angle for a marble surface were carried out for two systems: dry marble plate-water drop-saturated water vapour and marble wetted by water-water drop-dry air (in the presence of molecular sieves). The marble plate was placed in a measuring chamber and contact angles were measured after different lengths of time; it was found that their values grew to a maximum which was reached after about 30 min. It was found that when the dry marble plate was placed in saturated water vapour for 24 h the contact angle decreased in comparison with its maximal value. To explain the results obtained, theoretical calculations were made. The theoretical calculations and measurements showed that it was possible to obtain a contact angle greater than zero on a marble surface, depending on the structure and thickness of the water film.