Estrogen content of dairy and swine wastes

Naturally occurring estrogens in animal wastes may cause negative environmental impacts, yet their abundance in animal waste treatment and storage structures is poorly documented. To better quantify estrogen concentrations in animal wastes, multiple waste samples were collected from treatment and storage structures at dairy and swine facilities and analyzed for concentrations of 17beta-estradiol (E2), estrone (E1), and 17alpha-estradiol by gas chromatography-mass spectroscopy and by enzyme linked immunosorbent assay (E2 only). Mass ratios of each estrogen to the macronutrients nitrogen, phosphorus, and potassium were also determined. Because manure application rates are typically macronutrient-based, estrogen to macronutrient ratios are proportional to areal mass application rates of estrogen to fields. Swine farrowing waste (from farrowing sows and piglets) had the highest ratios of E2 to macronutrients. Mean ratios in swine farrowing waste were roughly twice those in swine finishing waste (from growing male and nonpregnant female animals) and more than four times higher than those in dairy waste (from lactating cows in various stages of their reproductive cycles); these differences were statistically significant (alpha = 0.05). Estrone followed a similar trend. In contrast, ratios of 17alpha-estradiol to macronutrients were highest in dairy operations. These results can be used to better predict estrogen loading rates on fields receiving swine and dairy wastes.     

Starch Hydrolysate,an Optimal and Economical Source of Carbon for the Secretion of Citric Acid by Yarrowia lipolytica (DS-1)

Using Yarrowia lipolytica (DS-1), secretion of citric acid is studied as a function of carbon sources such as glucose, fructose, hydrol, sucrose, cane sugar molasses, kerosene (all available commercially) and tapioca starch hydrolysate, invert sucrose and invert cane sugar molasses (all prepared in laboratory). On the basis of their acceptability by DS-1 for citric and isocitric acid secretion, it is concluded that (a) sucrose and cane sugar molasses (with/without inversion) served as poor carbon sources, (b) fructose, hydrol, impure tapioca starch hydrolysate (96 DE w/w) and invert sucrose served as relatively better carbon sources and (c) purified tapioca starch hydrolysate (96 DE w/w) was the best carbon source to substitute glucose by giving comparable (75%) efficiency of conversion and economical advantage.     

Emissivity of substrate supported films

Results of experimental measurements of emissivity carried out on cobalt oxide and nickel sulphide films deposited on aluminum substrates are reported in this paper. Experimental results supported the general behaviour of variation of emissivity with film thickness as reported theoretically. The theoretical model is based on the interaction and attenuation of the emitted wavelengths from the substrate and film materials.     

CryptoCT: towards privacy preserving color transfer and storage over cloud

Multimedia Tools and Applications - Current trend toward cloud computing coupled with emerging technologies such as high definition images/videos and 360-degree videos, has led the requirement of...     

Large-eddy-simulation-based multiscale modeling of TiO2 nanoparticle synthesis in a turbulent flame reactor using detailed nucleation chemistry

In this work, we present a multiscale computational model for flame synthesis of TiO₂ nanoparticles in a turbulent flame reactor. The model is based on large-eddy simulation (LES) methodology in conjunction with detailed gas-phase chemical kinetics to accurately model the highly complicated combustion and nucleation processes in a turbulent flame. A flamelet-based model is used to model turbulence–chemistry interactions. In particular, the transformation of TiCl₄ to the solid primary nucleating TiO₂ nanoparticles is represented using an unsteady kinetic model considering 30 species and 69 reactions in order to accurately describe the important event of nanoparticle formation. The evolution of the TiO₂ number density function is tracked using the quadrature method of moments (QMOM). For validation purposes, the detailed computational model is compared against experimental data and reasonable agreement is obtained.     

Structural and thermal characterization of CaO–MgO–SiO2–P2O5–CaF2 glasses

The influence of varying the CaO/MgO ratio on the structure and thermal properties of CaO–MgO–SiO₂–P₂O₅–CaF₂ glasses was studied in a series of eight glass compositions in the glass forming region of diopside (CaMgSi₂O₆)–fluorapatite [Ca₅(PO₄)₃F]–wollastonite (CaSiO₃) ternary system. The melt-quenched glasses were characterized for their structure by infrared spectroscopy (FTIR) and magic angle spinning (MAS)-nuclear magnetic resonance (NMR) spectroscopy. Silicon is predominantly present as Q² (Si) species, while phosphorus tends to coordinate in orthophosphate environment. The sintering and crystallization parameters of the glasses were obtained from differential thermal analysis (DTA) while crystalline phase fractions in the sintered glass–ceramics were analyzed by X-ray diffraction adjoined with Rietveld refinement. Diopside, fluorapatite, wollastonite and pseudowollastonite crystallized as the main crystalline phases in all the glass–ceramics with their content varying with respect to variation in CaO/MgO ratio in glasses. The implications of structure and sintering behaviour of glasses on their bioactivity were discussed.     

Spectroscopic and Simulation Analysis of Facile PEDOT:PSS Layer Deposition-Silicon for Perovskite Solar Cell

In this research work, we have characterized and simulated a well-known hole transport material (HTM) for perovskite solar cell (PSC) and conductive polyme     

Integrated ozone–photo–Fenton process for the removal of pollutant from industrial wastewater

The use of hybrid advanced oxidation processes(AOPs) for the removal of pollutants from industrial effluents has been extensively studied in recent literature. The aim of this study is to compare the performance of the photo,Fenton, photo-Fenton and ozone–photo–Fenton processes in terms of color removal and chemical oxygen demand(COD) removal of distillery industrial effluent together with the associated electrical energy per order. It was observed from the experimental results that the O_3/UV/Fe~(2 +)/H_2O_2 process yielded a 100% color and95.50% COD removals with electrical energy per order of 0.015 k W·h·m~(-3) compared to all other combinations of the AOPs. The effects of various operating parameters such as H_2O_2 and Fe~(2+) concentration, effluent pH, COD concentration and UV power on the removal of color, COD and electrical energy per order for the ozone–photo–Fenton process was critically studied and reported. The color and COD removals were analyzed using a UV/Vis spectrometer and closed reflux method.     

Towards β-phase formation probability in spin coated PVDF thin films

This work aimed towards the study on variations in the percentage of β-phase in Poly vinylidene fluoride (PVDF) thin films deposited by spin coating technique. PVDF is a semi-crystalline polymer which exhibits α, β, γ and δ polymorphs. Among these polymorphs, generally it crystallizes in a non-polar α-phase, which is of little importance as far as its applications are concerned. However, the β-phase, which exhibits spontaneous polarity created tremendous interest and showed a path towards the devices based on its pyro- and piezoelectric properties. Fourier Transform Infrared (FTIR) spectroscopy and XRD techniques were used to study the percentage of formation of β-phase in spin coated PVDF thin films at different processing conditions viz. spin rotation speed (rpm), solution concentration and annealing temperature. We identified the β-phase percentage in PVDF thin films, which are (i) Deposited with different rotation speeds ranging from 1000 to 9000 rpm, (ii) Annealed at different temperatures viz.; room temperature to 100C, and (iii) Deposited at various solution concentrations. It is identified that percentage of formation of β-phase is high in the films deposited with 15(w/v)% solution concentration which is annealed at 100C. The films deposited at higher rpm is showing low enhancement in the β-phase with annealing temperature.     

Characterization of the Evolution and Properties of Silicon Carbide Derived From a Preceramic Polymer Precursor

This study reports on the fabrication and characterization of polymer‐derived amorphous and nano‐grained SiC, by controlled pyrolysis of allylhydridopolycarbosilane (AHPCS) under inert atmosphere. Processing temperatures and hold times at final temperatures are varied to study the influence of processing parameters on the structure and resulting properties. Chemical changes, phase transformations, and microstructural changes occurring during the pyrolysis process are studied. Polymer cross‐linking and polymer to ceramic conversion is studied using infrared spectroscopy (FTIR). Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) are performed to monitor the mass loss and phase change as a function of temperature. X‐ray diffraction studies are performed to study the intermediate phases and microstructural changes. Hardness and modulus measurements are carried out using instrumented nanoindentation to establish processing‐property‐structure relationship for SiC derived from the polymer precursor. It is seen that the presence of nanocrystalline domains in amorphous SiC significantly influences the modulus and hardness. A nonlinear relationship is observed in these properties with optimal mechanical properties observed for SiC processed to 1150°C for 1 h hold duration, having average grain size of 3 nm. In addition, bulk mechanical characterization, in terms of biaxial flexure strength, is done for SiC–SiC particulate composites purely derived from the polymer precursor.