Phonon engineering in carbon nanotubes by controlling defect concentration

Outstanding thermal transport properties of carbon nanotubes (CNTs) qualify them as possible candidates to be used as thermal management units in electronic devices. However, significant variations in the thermal conductivity (κ) measurements of individual CNTs restrict their utilizations for this purpose. In order to address the possible sources of this large deviation and to propose a route to solve this discrepancy, we systematically investigate the effects of varying concentrations of randomly distributed multiple defects (single and double vacancies, Stone-Wales defects) on the phonon transport properties of armchair and zigzag CNTs with lengths ranging between a few hundred nanometers to several micrometers, using both nonequilibrium molecular dynamics and atomistic Green's function methods. Our results show that, for both armchair and zigzag CNTs, κ converges nearly to the same values with different types of defects, at all lengths considered in this study. On the basis of the detailed mean free path analysis, this behavior is explained with the fact that intermediate and high frequency phonons are filtered out by defect scattering, while low frequency phonons are transmitted quasi-ballistically even for several micrometer long CNTs. Furthermore, an analysis of variances in κ for different defect concentrations indicates that defect scattering at low defect concentrations could be the source of large experimental variances, and by taking advantage of the possibility to create a controlled concentration of defects by electron or ion irradiation, it is possible to standardize κ with minimizing the variance. Our results imply the possibility of phonon engineering in nanostructured graphene based materials by controlling the defect concentration.     

Improvement of polyvinyl alcohol/casein blend film properties by adding cellulose nanocrystals

This study aims to prepare and examine the properties of poly(vinyl alcohol)/casein (PVA/CAS) based films reinforced with cellulose nanocrystals (NC), which can be presented as an alternative to petroleum-based polymer packaging materials. PVA/CAS and 0.5–1–3–5 wt% NC containing PVA/CAS biocomposite films were prepared by solution casting method. Afterward, the 1NC film, which exhibited the best mechanical properties, was crosslinked with various amounts of glyoxal. Structural, morphological (polarized optical microscope), mechanical (tensile), thermal (differential scanning calorimetry, thermogravimetric analysis), contact angle, and water vapor transmission rate (WVTR) properties of the samples were investigated. The 1NC film exhibited the highest tensile strength (TS) and elongation values in PVA/CAS/NC films, and its mechanical properties decreased due to agglomeration with increasing NC amount. As expected, crosslinking improved the TS. The thermal stability of the PVA/CAS film was generally improved with the addition of NC and crosslinking. The high WVTR value of the PVA/CAS film decreased with the addition of NC and the 1NC film presented the lowest value. Thanks to the complex structure formed as a result of crosslinking and the reduced free volume, the WVTR of the 1NC film has reduced. The results showed that PVA/CAS-based films with good mechanical properties and water vapor barrier are promising as packaging materials.     

Theories of dual diagnosis in mental retardation.

Provides a historical review of theory development in the field of dual diagnosis. Dual diagnosis, defined in this instance as the co-occurrence of mental health disorders with mental retardation, has become a major area of clinical practice and research in the past 10 yrs. Whereas areas such as differential diagnosis, assessment, and prevalence have been major focuses of research, etiologies of dual diagnosis have received less attention. Current etiological theories have practical implications for the treatment and prevention of dual diagnoses and suggest important directions for future research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Room Temperature Photocatalytic Oxidation of Carbon Monoxide Over Pd/TiO2–SiO2 Catalysts

The photocatalytic oxidation of carbon monoxide over TiO₂–SiO₂ and Pd/TiO₂–SiO₂ catalysts was studied. The catalyst samples were synthesized by using sol–gel technique coupled with hydrothermal treatment and all samples were hydrothermally treated before calcination in air. The catalyst samples were characterized by XRD, BET and DRIFTS techniques. The photocatalytic activity of the samples was determined by using circulated batch photoreactor coupled with in line gas transmission FTIR cell charged with 2,000 ppm carbon monoxide in air initially over 0.5 g of catalyst sample under 33 W (254 nm) irradiation power. XRD and BET results confirmed the presence of anatase phase and the decrease on the crystallite size of TiO₂ with SiO₂ addition which yield higher surface area and better dispersion of TiO₂ over mesoporous SiO₂. DRIFTS results indicated the presence of surface hydroxyls coordinated to Ti⁴⁺ and Si–O–Ti sites. All samples containing 10–90 % TiO₂ over SiO₂ exhibited significant photo oxidation activity at room temperature. The photocatalytic oxidation rate of carbon monoxide is favored by SiO₂ addition due to high surface area, better dispersion of TiO₂ particles and higher surface defects. The addition of PdO improves the photocatalytic activity significantly and the synergy between the TiO₂ and PdO phases.     

Correlative Light-Ion Microscopy for biological applications

Here we report a new technique, Correlative Light-Ion Microscopy (CLIM), to correlate SEM-like micrographs with fluorescence images. This technique presents significant advantages over conventional methods in enabling topographical and biochemical information to be correlated with nanoscale resolution without destroying the fluorescence signal. We demonstrate the utility of CLIM for a variety of investigations of cell substrate interactions validating its potential to become a routine procedure in biomedical research.     

Monolithically integrated two-dimensional arrays of surface-emitting photonic-crystal terahertz lasers

We demonstrate two-dimensional arrays of surface-emitting THz frequency photonic-crystal quantum cascade lasers covering a broad spectral range. The arrays are made of 16 unit elements, each of them spectrally single mode and featuring a narrow divergence emission pattern. The array emission frequencies cover a range of ≈0.2 THz around an emission frequency of ≈2.75 THz. Large size and small size devices have been developed. The former devices operate up to a maximum temperature of ≈90K with 2 to 3 mW output power in continuous wave regime.     

Meat species identification and Halal authentication using PCR analysis of raw and cooked traditional Turkish foods

The method performance characteristics of commercially available PCR kits for animal species identification were established. Comminuted meat products containing different levels of pork were prepared from authentic beef, chicken, and turkey. These meat products were analysed in the raw state and after cooking for 20 min at 200 °C. For both raw and cooked meats, the PCR kit could correctly identify the animal species and could reliably detect the addition of pork at a level below 0.1%. A survey of 42 Turkish processed meat products such as soudjouk, salami, sausage, meatball, cured spiced beef and doner kebap was conducted. Thirty-six samples were negative for the presence of pork (< 0.1%) and four were found to be correctly labelled as containing pork. However, one sausage sample was labelled as containing 5% beef, but beef DNA was not detected and a meatball sample labelled as 100% beef was found to contain chicken. Another turkey meatball sample was predominantly chicken.     

Optimization of temperature and light intensity for improved photofermentative hydrogen production using Rhodobacter capsulatus DSM 1710

Photofermentative hydrogen production is influenced by several parameters, including feed composition, pH levels, temperature and light intensity. In this study, experimental results obtained from batch cultures of Rhodobacter capsulatus DSM 1710 were analyzed to locate the maximum levels for the rate and yield of hydrogen production with respect to temperature and light intensity. For this purpose, a 3^k general full factorial design was employed, using temperatures of 20, 30 and 38 °C and light intensities of 100, 200 and 340 W/m². ANOVA results confirmed that these two parameters significantly affect hydrogen production. Surface and contour plots of the regression models revealed a maximum hydrogen production rate of 0.566 mmol H₂/L/h at 27.5 °C and 287 W/m² and a maximum hydrogen yield of 0.326 mol H₂/mol substrate at 26.8 °C and 285 W/m². Validation experiments at the calculated optima supported these findings.     

Hydrogen supply chain architecture for bottom-up energy systems models. Part 1: Developing pathways

The integration of hydrogen energy systems in the overall energy system is an important and complex subject for hydrogen supply chain management. The efficiency of the integration depends on finding optimum pathways for hydrogen supply. Accordingly, energy systems modelling methods and tools have been implemented to obtain the best configuration of hydrogen processes for a defined system. The appropriate representation of hydrogen technologies becomes an important stage for energy system modelling activities. This study, split in consecutive parts, has been conducted to analyse how representative hydrogen supply pathways can be integrated in energy systems modelling. The current paper, the first part of a larger study, presents stylised pathways of hydrogen supply chain options, derived on the basis of a detailed literature review. It aims at establishing a reference hydrogen energy system architecture for energy modelling tools. The subsequent papers of the study will discuss the techno-economic assumptions of the hydrogen supply chain components for energy modelling purposes.     

In situ modification of cyclohexanone formaldehyde resin with boric acid for high‐performance applications

A boron‐containing cyclohexanone formaldehyde resin (BCFR) was synthesized from cyclohexanone, formaldehyde, and boric acid. The effects of the boric acid concentration, solubility, molecular weight, and thermal properties on the product were investigated. Characterization of the BCFRs was done by NMR spectroscopy, gel permeation chromatography, and Fourier transform infrared–attenuated total reflectance spectroscopy. The thermal properties of the samples were determined with differential scanning calorimetry and thermogravimetric analysis. The study results demonstrate that the resin had higher heat‐resistance properties than the commonly modified cyclohexanone formaldehyde resin. The obtained samples were also characterized morphologically by scanning electron microscopy. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013