Adaptive joint beamforming and B‐MMSE detection for CDMA signal reception under multipath interference

The combination of antenna array beamforming with multiuser detection can effectively improve the detection efficiency of a wireless system under multipath interference, especially in a fast‐fading channel. This paper studies the performance of an adaptive beamformer incorporated with a block‐wise minimum mean square error(B‐MMSE) detector, which works on a unique signal frame characterized by training sequence preamble and data blocks segmented by zero‐bits. Both beam‐former weights updating and B‐MMSE detection are carried out by either least mean square (LMS) or recursive least square (RLS) algorithm. The comparison of the two adaptive algorithms applied to both beamformer and B‐MMSE detector will be made in terms of convergence behaviour and estimation mean square error. Various multipath patterns are considered to test the receiver's responding rapidity to changing multipath interference. The performance of the adaptive B‐MMSE detector is also compared with that of non‐adaptive version (i.e. through direct matrix inversion). The final performance in error probability simulation reveals that the RLS/B‐MMSE scheme outperforms non‐adaptive B‐MMSE by 1–5 dB, depending on the multipath channel delay profiles of concern. The obtained results also suggest that adaptive beamformer should use RLS algorithm for its fast and robust convergence property; while the B‐MMSE filter can choose either LMS or RLS algorithm depending on antenna array size, multipath severity and implementation complexity. Copyright © 2004 John Wiley & Sons, Ltd.     

Cross-Sectional Study of Macrodefects in MBE Dual-Band HgCdTe on CdZnTe

HgCdTe dual-band mid-wave infrared/long-wave infrared focal-plane arrays on CdZnTe are a key component in advanced electrooptic sensor applications. Molecular beam epitaxy (MBE) has been used successfully for growth of dual-band layers on larger CdZnTe substrates. However, the macrodefect density, which is known to reduce the pixel operability and its run-to-run variation, is larger when compared with layers grown on Si substrate. This paper reports the macrodefect density versus size signature of a well-optimized MBE dual-band growth and a cross-sectional study of a macrodefect that represents the most prevalent class using focused ion beam, scanning transmission electron microscopy, and energy-dispersive x-ray spectroscopy. The results show that the macrodefect originates from a void, which in turn is associated with a pit on the CdZnTe substrate.     

A Novel Character Segmentation Method for Text Images Captured by Cameras

Due to the rapid development of mobile devices equipped with cameras, instant translation of any text seen in any context is possible. Mobile devices can serve as a translation tool by recognizing the texts presented in the captured scenes. Images captured by cameras will embed more external or unwanted effects which need not to be considered in traditional optical character recognition (OCR). In this paper, we segment a text image captured by mobile devices into individual single characters to facilitate OCR kernel processing. Before proceeding with character segmentation, text detection and text line construction need to be performed in advance. A novel character segmentation method which integrates touched character filters is employed on text images captured by cameras. In addition, periphery features are extracted from the segmented images of touched characters and fed as inputs to support vector machines to calculate the confident values. In our experiment, the accuracy rate of the proposed character segmentation system is 94.90%, which demonstrates the effectiveness of the proposed method.     

Hybrid infrared focal plane signal and noise model

A signal and noise model is presented for an infrared sensor with an advanced hybrid focal plane that uses a CMOS readout integrated circuit (ROIC). Part of the motivation for this work is to present a clear foundation for some of the well-known practical and useful rules that apply to infrared sensors in use today. The model shows explicitly how a correlated double sampler (CDS) eliminates kTC noise, explains the interesting dependence of output 1/f noise on integration and epoch times, and is generic enough to treat a large class of ROIC preamps. A sensor with a direct injection readout is treated as an example and user-friendly formulas are listed and used to calculate sensor signal and noise     

Factors Affecting the Stability of CdTe/CdS Solar Cells Deduced from Stress Tests at Elevated Temperature

CdTe/CdS solar cells were subjected to heat stress at 200 °C in the dark under different environments (in N₂ and in air), and under illumination (in N₂). We postulate that two independent mechanisms can explain degradation phenomena in these cells: i) Excessive Cu doping of CdS: Accumulation of Cu in the CdS with stress, in the presence of Cl, will increase the photoconductivity of CdS. With limited amounts of Cu in CdS, this does NOT affect the photovoltaic behavior, but explains the crossover of light/dark current–voltage (J–V) curves. Overdoping of CdS with Cu can be detrimental to cell performance by creating deep acceptor states, acting as recombination centers, and compensating donor states. Under illumination, the barrier to Cu cations at the cell junction is reduced, and, therefore, Cu accumulation in the CdS is enhanced. Recovery of light‐stress induced degradation in CdTe/CdS cells in the dark is explained by dissociation of the acceptor defects. ii) Back contact barrier: Oxidation of the CdTe back surface in O₂/H₂O‐containing environment to form an insulating oxide results in a back‐contact barrier. This barrier is expressed by a rollover in the J–V curve. Humidity is an important factor in air‐induced degradation, as it accelerates the oxide formation. Heat treatment in the dark in inert atmosphere can stabilize the cells against certain causes of degradation, by completing the back contact anneal.     

Zr‐Doped Indium Oxide (IZRO) Transparent Electrodes for Perovskite‐Based Tandem Solar Cells

Parasitic absorption in transparent electrodes is one of the main roadblocks to enabling power conversion efficiencies (PCEs) for perovskite‐based tandem solar cells beyond 30%. To reduce such losses and maximize light coupling, the broadband transparency of such electrodes should be improved, especially at the front of the device. Here, the excellent properties of Zr‐doped indium oxide (IZRO) transparent electrodes for such applications, with improved near‐infrared (NIR) response, compared to conventional tin‐doped indium oxide (ITO) electrodes, are shown. Optimized IZRO films feature a very high electron mobility (up to ≈77 cm² V^?1 s^?1), enabling highly infrared transparent films with a very low sheet resistance (≈18 Ω □^?1 for annealed 100 nm films). For devices, this translates in a parasitic absorption of only ≈5% for IZRO within the solar spectrum (250–2500 nm range), to be compared with ≈10% for commercial ITO. Fundamentally, it is found that the high conductivity of annealed IZRO films is directly linked to promoted crystallinity of the indium oxide (In₂O₃) films due to Zr‐doping. Overall, on a four‐terminal perovskite/silicon tandem device level, an absolute 3.5 mA cm^?2 short‐circuit current improvement in silicon bottom cells is obtained by replacing commercial ITO electrodes with IZRO, resulting in improving the PCE from 23.3% to 26.2%.     

Cooperative Decode‐and‐Forward Relaying for Secure Multicasting

In this paper, secure multicasting with the help of cooperative decode‐and‐forward relays is considered for the case in which a source securely sends a common message to multiple destinations in the presence of a single eavesdropper. We show that the secrecy rate maximization problem in the secure multicasting scenario under an overall power constraint can be solved using semidefinite programing with semidefinite relaxation and a bisection technique. Further, a suboptimal approach using zero‐forcing beamforming and linear programming based power allocation is also proposed. Numerical results illustrate the secrecy rates achieved by the proposed schemes under secure multicasting scenarios.     

Selective Pd Deposition on Au Nanobipyramids and Pd Site‐Dependent Plasmonic Photocatalytic Activity

The synthesis of anisotropic metal nanostructures is strongly desired for exploring plasmon‐enabled applications. Herein, the preparation of anisotropic Au/SiO₂ and Au/SiO₂/Pd nanostructures is realized through selective silica coating on Au nanobipyramids. For silica coating at the ends of Au nanobipyramids, the amount of coated silica and the overall shape of the coated nanostructures exhibit a bell‐shaped dependence on the cationic surfactant concentration. For both end and side silica coating on Au nanobipyramids, the size of the silica component can be varied by changing the silica precursor amount. Silica can also be selectively deposited on the corners or facets of Au nanocubes, suggesting the generality of this method. The blockage of the predeposited silica component on Au nanobipyramids enables further selective Pd deposition. Suzuki coupling reactions carried out with the different bimetallic nanostructures functioning as plasmonic photocatalysts indicate that the plasmonic photocatalytic activity is dependent on the site of Pd nanoparticles on Au nanobipyramids. Taken together, these results suggest that plasmonic hot spots play an important role in hot‐electron‐driven plasmonic photocatalysis. This study opens up a promising route to the construction of anisotropic bimetallic nanostructures as well as to the design of bimetallic plasmonic‐catalytic nanostructures as efficient plasmonic photocatalysts.