Buchbesprechungen

Ohne Zusammenfassung     

Analytic models for multistage interconnection networks

Central to all parallel architectures is a switching network which facilitates the communication between a machine's components necessary to support their cooperation. Multistage interconnection networks (MINs) are classified and analytic models are described for both packet-switched and circuit-switched MINs with asynchronous transmission mode. Under strong enough assumptions, packet switching can be modeled by standard queuing methods, hence providing a standard against which to assess approximate models. We describe one such approximate model with much weaker assumptions which is more widely applicable and can be implemented more efficiently. To model circuit switching requires a different approach because of the presence of passive resources, namely multiple links through the MIN which must be held before a message can be transmitted and throughout its transmission. An approximate analysis based upon the recursive structure of a particular MIN topology which yields accurate predictions when compared with simulation is described.     

Phase Studies Concerning Sintering in Aluminas Doped with Ti4+

Previous solid state analyses of sintering in Ti⁴⁺-doped-commercial alumina are shown to be in error because a liquid phase exists in the appropriate region of the Al₂O₃−TiO₃−Na₂Ophase diagram at least by 1350^°C, a temperature lower than that at which "solid state" studies were conducted. It is suggested that liquid-phase sintering is a much more common occurrence than was realized formerly.     

Finite‐Element Implementation of a Self‐consistent Texture Model with a Hardening Law Based on Dislocation Densities

A self‐consistent texture model is implemented in the finite‐element code ABAQUS/Explicit®. Hardening of the slip systems is described by evolution laws for dislocation densities, and the Bauschinger effect is included. With these ingredients the cold rolling of an IF‐steel is simulated and the evolution of texture and anisotropy is examined. The use of the dislocation based hardening law is found to have a significant effect on the evolution of the anisotropic yield surface, but only very little influence on the texture. Furthermore, the hardening model is used to investigate the evolution of dislocation densities in differently oriented grains during plane strain compression. It is found that the dislocation density varies greatly depending on orientation, an observation which can help to explain the orientation dependence of recrystallization.     

Formation of layered structure on bismuth-borate glass surface

X-ray diffraction analysis shows that the transformation during heat treatment from amorphous to crystalline phases of bismuth-borate glass samples takes place in sequences. After a short heat treatment, 5 min at 550 °C, a layered structure with a preferred orientation of crystallites on the surface is observed. After a long heat treatment, 8 h at the same temperature, normal polycrystalline bulk samples are obtained.     

Effect of preparation technique on the properties of Mo-containing Al-MCM-41

The Al-MCM-41 has been used as support to prepare Mo-containing catalysts. The 12- molybdophosphoric heteropoly acid (HPMo) is used as initial compound. The catalysts are synthesized by two different methods: incipient impregnation with aqueous solution of the acid and mechanochemical synthesis. The samples were tested in the reaction of the thiophene hydrodesulfurization after activation with mixture H₂ + H₂S. The effect of the preparation method of the catalysts on their physicochemical and catalytic properties has been studied. A partial destruction of the loaded compound is observed in mechanochemically treated sample whereas the aggregates are formed from the particles of different size in the impregnated sample. The specific surface area of the sample prepared by mechanical–chemical treatment decreases 2–3 times, while the total pore volume is about four times lower. The HDS activity is higher on the impregnated sample than on the mechanochemically treated one.     

Salt-water up-coning during extraction of fresh water from a tropical island

Rainwater can collect in a lens-shaped region within the rock of a tropical island, and may be separated from the underlying salt water by a sharp interface. This paper presents a nonlinear theory for determining the shape of this interface. The island is assumed to be saturated with rain, and provision is made for the outflow of rain-water through the sides of the island. The effect of a bore well on the shape of the interface is investigated, and the problem is solved using a spectral method. An integral-equation method is also presented for the case when the island has infinite width.     

最快晶体管的频率接近太赫兹

Robert J.Mears是用于宽带互联网的铒掺杂光纤放大器(EDFA)的发明者。他在寻找将光器件和波导结合到硅中的方法时,发现了一个有趣的结果:一种特殊的硅超晶格结构可以加速某一个     

Conditionals and conditional probability.

The authors report 3 experiments in which participants were invited to judge the probability of statements of the form if p then q given frequency information about the cases pq, p?q, ?pq, and ?p?q (where ? = not). Three hypotheses were compared: (a) that people equate the probability with that of the material conditional, 1 - P(p?q); (b) that people assign the conditional probability, P(q/p); and (c) that people assign the conjunctive probability P(pq). The experimental evidence allowed rejection of the 1st hypothesis but provided some support for the 2nd and 3rd hypotheses. Individual difference analyses showed that half of the participants used conditional probability and that most of the remaining participants used conjunctive probability as the basis of their judgments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)