Micromechanical characterisation of fibre/matrix interfaces

Theoretical analyses for the single fibre pull-out and push-out models under monotonic loading are given which are based on a shear-lag analysis in a fracture mechanics approach considering non-constant friction at the debonded interface as a result of fibre Poisson contraction (or expansion). The solutions allow the determination of typical fibre/matrix interfacial properties such as the interfacial fracture toughness, G_ic, the coefficient of friction, μ, and the residual clamping stress, q₀. Under cyclic loading the interfacial properties are expected to degrade as a result of repetitive abrasion, and a power law function is assumed between μ and the number of elapsed cycles, N. However, G_ic is assumed to be unaffected and a fracture mechanics based debond criterion is derived for the relationship between the external applied stress, the debond length and the reduced friction coefficient for both fibre pull-out and fibre push-out. In addition, the relative displacements between the free fibre end and the matrix top are obtained for cyclic fatigue when the fibre is loaded and unloaded. A relationship obtained for the protrusion (or intrusion) length in fibre pull-out (or push-out) experiments allows the severity of the interface frictional degradation to be evaluated and characterised. Similarities and differences in the frictional degradation behaviour between fibre pull-out and push-out are also identified.     

A study of solid circulation rate in a circulating fluidized bed

An experimental investigation under cold condition was made to study the effects of some operating/design parameters and non-mechanical L valve configuration on the solid circulation rate in a 4.5 m tall, 0.15 m diameter circulating fluidized bed with riser flow rate varying from 1400 litres/min to 2000 litres/min and bed inventory from 15 kg to 25 kg of sand of average sizes 200 μm, 400 μm and 500 μm. Solid circulation rate was estimated by measuring velocity of sand particle travelling through a vertical Perspex tube section at the bottom of the return leg. It was found to be in the range of 2.8 to 12.3kg/m²s, 0.07 to 9.1kg/m²s and 0.12 to 2.23kg/m²s for sand sizes of 200 μm, 400 μm and 500 μm, respectively for a horizontal L valve. Two mathematical correlations have been developed from the experimental results to predict solid circulation rate as a function of riser flow rate, aeration flow rate, total bed inventory and particle size used.     

Continuous hydrogen evolution from cyclohexanes over platinum catalysts supported on activated carbon fibers

The continuous production of hydrogen from cyclohexanes is achieved effectively using Pt/ACF (ACF = activated carbon fiber) catalysts in a fixed-bed flow reactor. The Pt catalysts are more effective than a Pd/ACF catalyst for the reaction. Besides cyclohexane, methylcyclohexane, 1,4-dimethylcyclohexane, and p-menthane can also be employed as hydrogen source in the reaction system.     

Balance-dendrogram. A new routine of CoDaPack

A statistical analysis of compositional data based on the Aitchison geometry of the simplex requires an appropriate basis for representing the data. A simple and intuitive way of building such a basis employs a sequential binary partition of the compositional vector. The partition, together with some statistical summaries of the coordinates, or balances, can be represented in a dendrogram-type graph. In this paper we introduce an implementation of this methodology inside CoDaPack, which is freeware. An example with real data illustrates the use of the Balance-Dendrogram routine.     

Fracture mechanics of a shaft-loaded blister of thin flexible membrane on rigid substrate

A shaft-loaded blister test has been developed to measure the interfacial energy W of a thin flexible polymeric film adhered to a rigid substrate. A theoretical analysis is given of an axisymmetric debond (blister) in terms of an external applied load P, tensile stretching modulus E and thickness h of the adhering layer. The fracture mechanics model presented considers both elastic and elastoplastic deformations in the thin film. The intrinsic stable interface debonding process provides an attractive alternative to the conventional adhesion measurement techniques.     

Determination of the elastic component for polymeric melt under steady shear flow

Steady state shear flow in rectilinear coordinates can be generated by a direct shear rheometer. The rheological behavior of polymeric melts under shear flow can be characterized by the inception of steady shear flow and stress relaxation after cessation of steady shear flow. Experiments were performed for bisphenol A polycarbonate with various mol wts. The elastic components, such as the primary normal stress differences and the elastic recoverable shear strain of the polymeric melts, can be determined from the shear moduli. © 1993 John Wiley & Sons, Inc.     

Grain size effects on cyclic fatigue and crack-growth resistance behaviour of partially stabilized zirconia

Cyclic fatigue crack growth and crack-resistance behaviour was studied in partially stabilized zirconia (PSZ) with three different cubic-phase grain sizes following sub-eutectoid heat treatments. Raman spectroscopy was used to determine the extent of phase transformation around the cracks for both cyclic and monotonic loading conditions. All tests were on long, through thickness cracks using compact-tension specimens. Predictions of crack-tip shielding were made following determination of toughening parameters using crackresistance data. It was found that the dominant factors affecting cyclic fatigue-crack growth were the level of crack-tip shielding, as a result of phase transformation, and the intrinsic toughness of the material. Grain size did not appear to significantly affect fatigue crack-growth behaviour.     

Graphene oxide-decorated Fe<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> microflowers as a promising anode for lithium and sodium storage

Mixed transition metal oxides (MTMOs) have received intensive attention as promising anode materials for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). In this work, we demonstrate a facile one-step water-bath method for the preparation of graphene oxide (GO) decorated Fe₂(MoO₄)₃ (FMO) microflower composite (FMO/GO), in which the FMO is constructed by numerous nanosheets. The resulting FMO/GO exhibits excellent electrochemical performances in both LIBs and SIBs. As the anode material for LIBs, the FMO/GO delivers a high capacity of 1,220 mAh·g^–1 at 200 mA·g^–1 after 50 cycles and a capacity of 685 mAh·g^–1 at a high current density of 10 A·g^–1. As the anode material for SIBs, the FMO/GO shows an initial discharge capacity of 571 mAh·g^–1 at 100 mA·g^–1, maintaining a discharge capacity of 307 mAh·g^–1 after 100 cycles. The promising performance is attributed to the good electrical transport from the intimate contact between FMO and graphene oxide. This work indicates that the FMO/GO composite is a promising anode for high-performance lithium and sodium storage.

Open image in new window

     

A fuzzy-based interleaved multi-hop authentication scheme in wireless sensor networks

In sensor networks, a compromised node can either generate fabricated reports with false votes or inject false votes into real reports, which causes severe damage such as false alarms, energy drain and information loss. An interleaved hop-by-hop authentication (IHA) scheme addresses the former attack by detecting and filtering false reports in a deterministic and hop-by-hop fashion. Unfortunately, in IHA, all en-route nodes must join to verify reports while only a few are necessary to the authentication procedure. In this paper, we propose a fuzzy-based interleaved multi-hop authentication scheme based on IHA. In our scheme, the fuzzy logic system only selects some nodes for verification based on the network characteristics. Moreover, we apply a voting method and a hash-based key assignment mechanism to improve network security. Through performance evaluation, the proposed scheme is found to save up to 13% of the energy consumption and to provide more network protection compared to IHA.     

BSPNN: boosted subspace probabilistic neural network for email security

In the modern age of Internet connectivity, advanced information systems have accumulated huge volumes of data. Such fast growing, tremendous amount of data, collected and stored in large databases has far exceeded our human ability to comprehend without proper tools. There has been a great deal of research conducted to explore the potential applications of Machine Learning technologies in Security Informatics. This article studies the Network Security Detection problems in which predictive models are constructed to detect network security breaches such as spamming. Due to overwhelming volume of data, complexity and dynamics of computer networks and evolving cyber threats, current security systems suffer limited performance with low detection accuracy and high number of false alarms. To address such performance issues, a novel Machine Learning algorithm, namely Boosted Subspace Probabilistic Neural Network (BSPNN), has been proposed which combines a Radial Basis Function Neural Network with an innovative diversity-based ensemble learning framework. Extensive empirical analyses suggested that BSPNN achieved high detection accuracy with relatively small computational complexity compared with other conventional detection methods.