Storage life of frozen salmonoids Effect of light and packaging conditions on carotenoid oxidation and lipid oxidation

Summary The combined effect of oxygen transmission of packaging material and of exposure to light with different spectral distribution on the oxidative degradation of carotenoids and lipids in frozen salmonoids has been characterized in a storage experiment with steaks of rainbow trout. The degradation of the carotenoid astaxanthin, as followed by HPLC analysis and tristimulus colorimetric measurement, was sensitive to the radiant flux density of UV light and less sensitive to the oxygen transmission rate of the packaging material, in agreement with previous findings for photooxidation of carotenoids in food model systems. This is in contrast to the lipid oxidation, which was found to be dependent on the accessability of oxygen rather than on exposure to UV light. Formation of peroxides in the product culminated after 3 months of storage (up to 8.4 mEq kg^–1 oil), and preceded the formation of thiobarbituric-acid-reactive substances. The product in packaging material with a high oxygen transmission rate (60 cm³ m^–2 bar^–1 per 24 h) reached a level of approximately 5 mol malonaldhyde/kg^–1 product, when stored exposed to standard fluorescent light or fluorescent light with a high UV component. Rancid taste was not detected by sensory evaluation for any of the products after 6 months of storage, whereas a bitter taste was noted for the product exposed to UV light.

---

Die Haltbarkeit von Lachsforellen Einfluß von Licht und Verpackung auf die Carotenoid- und Fettoxydation

Zusammenfassung Der kombinierte Effekt von Sauerstoffdurchgang durch Verpackungsmaterial und der Lichteinwirkung verschiedener spektraler Verteilung auf den oxidativen Abbau der Carotinoide und Fette in gefrorenen Lachsforellen wurde in einem Lagerungsversuch untersucht. Der Abbau des Carotenoids Astaxanthin wurde mit HPLC undTristimulus-Calorimetrie beobachtet, und war empfindlich gegenüber UV-Licht und weniger empfindlich gegenüber der Sauerstoffdurchlässigkeit der Verpackung, was mit früheren Ergebnissen für Photooxidation der Carotinoide in Modellsystemen übereinstimmt. Dies widerspricht der Fettoxidation, die mehr von Sauerstoffzugang abhängig ist als von der Entwicklung des UV-Lichtes. Die Bildung von Peroxiden des Produktes kuliminierte nach 3monatiger Lagerung (bis 8,4 meq/kg Öl) und ging der Bildung von Thiobarbitursäure-aktiven Substanzen voraus. Das Produkt im Material mit hohem Sauerstoffdurchgang (60 cm³ m^–2 bar^–1 pro 24 h), das bei normalen fluorescierendem Licht oder bei fluorescierendem Licht mit hohem UV-Anteil aufbewahrt wurde, erreichte einen TBS-Wert von ungefähr 5 mol Malonaldehyd/kg Fleisch. Ein ranziger Geschmack wurde durch sensorische Bewertung nach 6monatiger Lagerung nicht erkannt, wohl aber ein bitterer Geschmack bei dem UV-Licht ausgesetzten Proben.

     

Chlorine loss and mass loss from Polyvinylchloride and polyvinylidenchloride under the electron beam

The loss of chlorine during the irradiation of PVC and PVDC in the electron microscope has been measured by the decay of the X-ray chlorineK signal. A number of factors affecting the measured beam damage curves have been considered and the experimental errors reduced to ±10%. The results show that the chlorine decay curves can be best described by the sum of two exponentials, corresponding to the two different chlorine decay processes, these being: the dehydrochlorination of the polymer molecules and the dehydrochlorination of the polyene structure formed by the beam damage. The higher initial chlorine content of PVDC compared to PVC will result in a larger amount of chlorine atoms reacting with the polyene structure, which is more stable in the electron beam than the undamaged polymer. The chlorine loss, measured by X-ray analysis, has been compared to the mass loss, measured by energy loss analysis, and also with the volume changes of isolated spherical PVC particles. It has been concluded that the mass loss is almost entirely due to chlorine loss and that the residual structure has a density similar to the undamaged PVC.     

Determination of specific heat of phenol formaldehyde resol resins by differential scanning calorimetry

The specific heat, Cp, was determined by DSC on a series of resol-type phenol formaldehyde resins with varying phenol formaldehyde molar ratio. The extrapolated Cp values at 25°C vary between 1.181-1.206 kJ · kg^?1 K^?1 and the dCp/dT ratio was found to be 0.0042kJ · kg^?1K^?2 in the temperature range of 70–125°C.     

Characterisation of three different impellers using the LDV-technique

A characterisation of three commonly used impellers was made in this study by measuring local mean velocities and the fluctuations of these velocities with the LDV technique. The data was used to estimate volumetric flow, velocity fluctuations and turbulent intensity in the impeller region of the tank. The impellers investigated were a high flow impeller, a pitched blade turbine and a Rushton turbine. The cylindrical vessel used was made of Perspex, had a dished bottom (DIN 28013), was equipped with four baffles and had an inner diameter of 0.45 m. It was found that the bulk velocities could be scaled with the tip-speed of the impeller (ND). The flow rate at constant impeller speed increased in the order high flow impeller — Rushton turbine — pitched blade turbine. The corresponding order for the turbulence fluctuation is: high flow impeller — pitched blade turbine — Rushton turbine. The velocity profile of the flow out from the high flow impeller was furthermore, not as smooth as could be expected.     

Experimental study of stable surfaces for anti-slug control in multi-phase flow

Severe slugging flow is always challenging in oil & gas production, especially for the current offshore based production. The slugging flow can cause a lot of problems, such as those relevant to production safety, fatigue as well as capability. As one typical phenomenon in multi-phase flow dynamics, the slug can be avoided or eliminated by proper facility design or control of operational conditions. Based on a testing facility which can emulate a pipeline-riser or a gas-lifted production well in a scaled-down manner, this paper experimentally studies the correlations of key operational parameters with severe slugging flows. These correlations are reflected through an obtained stable surface in the parameter space, which is a natural extension of the bifurcation plot. The maximal production opportunity without compromising the stability is also studied. Relevant studies have already showed that the capability, performance and efficiency of anti-slug control can be dramatically improved if these stable surfaces can be experimentally determined beforehand. The paper concludes that obtaining the stable surface on the new developed map can significantly improve the production rate in a control scheme. Even though the production rate can be further improved by moving the stable surface using advanced control strategies, the constant inputs can in some cases be preferable due to the easier implementation.     

Real time identification of discrete event systems using Petri nets

The paper defines the identification problem for Discrete Event Systems (DES) as the problem of inferring a Petri Net () model using the observation of the events and the available output vectors, that correspond to the markings of the measurable places. Two cases are studied considering different levels of the system knowledge. In the first case the place and transition sets are assumed known. Hence, an integer linear programming problem is defined in order to determine a modelling the DES. In the second case the transition and place sets are assumed unknown and only an upper bound of the number of places is given. Hence, the identification problem is solved by an identification algorithm that observes in real time the occurred events and the corresponding output vectors. The integer linear programming problem is defined at each observation so that the can be recursively identified. Some results and examples characterize the identified systems and show the flexibility and simplicity of the proposed technique. Moreover, an application to the synthesis of supervisory control of systems via monitor places is proposed.     

Purification, characterization, and high performance liquid chromatography assay of Salmonella glucose-1-phosphate cytidylyltransferase from the cloned rfbF gene

We report the purification and characterization of glucose-1-phosphate cytidylyltransferase, the first of five enzymes committed to biosynthesis of CDP-D-abequose from Salmonella enterica strain LT2. The purification was greatly facilitated by using a cloned rfbF gene encoding this enzyme. Pure enzyme was obtained by 64-fold enrichment in three chromatography steps. The NH2-terminal sequence of the purified enzyme was in agreement with the sequence predicted from the nucleotide sequence of the rfbF gene. The SDS-polyacrylamide gel electrophoresis estimated subunit M(r) of 31,000 agrees well with the M(r) of 29,035 calculated from the amino acid composition deduced from the nucleotide sequence of the rfbF gene. The glucose-1-phosphate cytidylyltransferase catalyzes a reversible bimolecular group transfer reaction and steady-state kinetic measurements, including product inhibition patterns, indicate that this reaction proceeds by a "ping-pong" type of mechanism. The Km values for CTP, alpha-D-glucose 1-phosphate, CDP-D-glucose, and pyrophosphate are 0.28, 0.64, 0.11, and 1.89 mM, respectively.     

Absorption-coefficient-determination method for particulate materials

A method is presented for determining the optical absorption coefficient, or the imaginary refractive index, of particulate material that has been collected from aerosols or hydrosols by means of filtration. The method, based on the Kubelka-Munk theory of diffuse reflectance, is nondestructive and requires no other knowledge of the sample than the amount present, the specific gravity, and an estimate of the real index of refraction. The theoretical development of the method is discussed along with an analysis of photometric and gravimetric errors. We test the method by comparing results obtained for powdered didymium glass with measurements made before the glass was crushed. An example of the method's application to the determination of the absorption coefficient of atmospheric dust at UV, visible, and near-IR wavelengths is also presented.     

The microsomal triglyceride transfer protein catalyzes the post-translational assembly of apolipoprotein B-100 very low density lipoprotein in McA-RH7777 cells

In cells in which the lipoprotein assembly process had been inactivated by brefeldin A (BFA), membrane-associated apoB-100 disappeared without forming lipoproteins or being secreted, indicating that it was degraded. Reactivation of the assembly process by chasing the cells in the absence of BFA, gave rise to a quantitative recovery of the membrane-associated apoB-100 in the very low density lipoprotein (VLDL) fraction in the medium. These results indicate that the membrane-associated apoB-100 can be converted to VLDL. A new method was developed by which the major amount (88%) of microsomal apoB-100 but not integral membrane proteins could be extracted. The major effect of this method was to increase the recovery of apoB-100 that banded in the LDL and HDL density regions, suggesting that the membrane-associated form of apoB-100 is partially lipidated. We also investigated the role of the microsomal triglyceride transfer protein (MTP) in the assembly of apoB-100 VLDL using a photoactivatable MTP inhibitor (BMS-192951). This compound strongly inhibited the assembly and secretion of apoB-100 VLDL when present during the translation of the protein. To investigate the importance of MTP during the later stages in the assembly process, the cells were preincubated with BFA (to reversibly inhibit the assembly of apoB-100 VLDL) and pulse-labeled (+BFA) and chased (+BFA) for 30 min to obtain full-length apoB-100 associated with the microsomal membrane. Inhibition of MTP after the 30-min chase blocked assembly of VLDL. This indicates that MTP is important for the conversion of full-length apoB-100 into VLDL. Results from experiments in which a second chase (-BFA) was introduced before the inactivation of MTP indicated that only early events in this conversion of full-length apoB-100 into VLDL were blocked by the MTP inhibitor. Together these results indicate that there is a MTP-dependent "window" in the VLDL assembly process that occurs after the completion of apoB-100 but before the major amount of lipids is added to the VLDL particle. Thus the assembly of apoB-100 VLDL from membrane-associated apoB-100 involves an early MTP-dependent phase and a late MTP-independent phase, during which the major amount of lipid is added.