Effect of Oral and Parenteral N Nutrition vs N-Free Nutrition on the Endogenous Amino Acid Flow at the Ileum of the Pig*

Two methods were tested for suppressing the depressive effect of N-free diets on the digestive secretions in pigs: the blood perfusion of amino acids (AA) or the peptide alimentation method. In the latter, enzymically hydrolysed casein (EHC), composed of oligopeptides and free AA, was used as the source of nitrogen. The unabsorbed dietary N molecules were discarded from the ileal digesta by ultrafiltration or gel filtration, assuming that the endogenous fraction did not contain significant amounts of small molecules. The AA supply by blood perfusion had no effect on the ileal endogenous AA losses (8·0 g AA kg⁻¹ DM intake) in growing pigs (±50 kg), compared with the N-free diet alone (8·3 g), whereas the EHC supplementation significantly increased them (18·0 g). The increase was due to both endogenous and dietary N. The presence of unabsorbed dietary AA in the ileal digesta was confirmed by the AA profile of the soluble molecules with a very low molecular mass (<3 kDa), which was close to that of EHC. Both ultrafiltration (cut-offs of 3 or 10 kDa) and gel filtration methods, utilised to discard the remaining dietary molecules, also eliminated a significant proportion of endogenous AA.     

Retrogradation Kinetics of Eight Starches

Retrogradation rate and extent were determined by differential scanning calorimetry and rheology measurements on 40% dry matter gels made from pea, modified waxy maize, rice, waxy rice, wheat, manioc, potato and microwaved irradiated potato starches. As a result, each starch retrogrades differently, depending also on the measurement technique. Nevertheless, potato and pea starches seem to be the most sensitive and the waxy and modified waxy types are the least sensitive to retrogradation.     

Farm-scale carbon and nitrogen fluxes in pastoral dairy production systems using different nitrogen fertilizer regimes

Nutrient Cycling in Agroecosystems - The nitrogen (N) fertilizer application rate (kg&nbsp;ha?1&nbsp;year?1) in pastoral dairy systems affects the flow of N through the soil,...     

A 1D High Performance Thin Layer Chromatography Method Validated to Quantify Phospholipids Including Cardiolipin and Monolysocardiolipin from Biological Samples

The aim of this study is to identify high performance thin layer chromatography (HPTLC) conditions allowing the separation and quantification of mammalian cellular phospholipids (PLs) (sphingomyelin, phosphatidylcholine, phosphatidylserine, phosphatidylinositol, phosphatidylethanolamine, and especially phosphatidic acid, cardiolipin, and monolysocardiolipin, these latter two being specifically located in mitochondria membranes). In order to make this method faster and easier, a 1D HPTLC method is chosen, testing several eluents as well as several staining methods. A pre‐conditioning of HPTLC plates with boric acid and a copper staining reagent followed by carbonization are selected for the quality of PL separation and homogeneity of staining. The selected conditions are discussed and the method validation is performed according to the International Conference on Harmonization guidelines. Linearity is effective between 1 and 8 µg and limit of quantification is between 0.5 and 2.3 µg depending on PL classes. Precision measurements show coefficients of variation <6%, and when amounts are close to the detection limit, <12%. Lipid extracts of tumor cell lines or isolated mitochondria are used to assess PL profiles. This shows that the HPTLC method can be used routinely to follow level variations of PLs. Practical Applications: The changes in PL composition play a crucial role in tumor processes and regulate cellular functions modulating cellular signaling or mitochondrial metabolism. The simple and cost‐effective 1D HPTLC method that is developed is applied to lipid extracts of whole tumor cells or hepatocyte‐isolated mitochondria. It is sensitive as well as precise to detect variations of phosphatidic acid or cardiolipin levels linked to physio‐pathological conditions. It can also be used to investigate the composition changes of other membrane PLs. Moreover, with a simultaneous analysis of 14 samples/standards on the same plate (six plates per day), this method is adapted for large series of samples.     

Bootstrap procedures for detecting multiple persistence shifts in heteroskedastic time series

This article proposes new bootstrap procedures for detecting multiple persistence shifts in a time series driven by non-stationary volatility. The assumed volatility process can accommodate discrete breaks, smooth transition variation as well as trending volatility. We develop wild bootstrap sup-Wald tests of the null hypothesis that the process is either stationary [I(0)] or has a unit root [I(1)] throughout the sample. We also propose a sequential procedure to estimate the number of persistence breaks based on ordering the regime-specific bootstrap p-values. The asymptotic validity of the advocated procedures is established both under the null of stability and a variety of persistence change alternatives. A comparison with existing tests that assume homoskedasticity illustrates the finite sample improvements offered by our methods. An application to OECD inflation rates highlights the empirical relevance of the proposed approach and weakens the case for persistence change relative to existing procedures.     

From Powders to Thermally Sprayed Coatings

Since the early stages of thermal spray, it has been recognized that the powder composition, size distribution, shape, mass density, mechanical resistance, components distribution for composite particles play a key role in coating microstructure and thermo mechanical properties. The principal characteristics of particles are strongly linked to the manufacturing process. Coatings also depend on the process used to spray particles and spray parameters. Many papers have been devoted to the relationships existing between coating properties and structures at different scales and manufacturing processes. In many conventional spray conditions resulting in micrometric structures, among the different parameters, good powder flow ability, and dense particles are important features. Thermal plasma treatment, especially by RF plasma, of particles, prepared by different manufacturing processes, allows achieving such properties and it is now developed at an industrial scale. Advantages and drawbacks of this process will be discussed. Another point, which will be approached, is the self-propagating high-temperature synthesis, depending very strongly upon the starting composite particle manufacturing. However, as everybody knows, “small is beautiful” and nano- or finely structured coatings are now extensively studied with spraying of: (i) very complex alloys containing multiple elements which exhibit a glass forming capability when cooled-down, their under-cooling temperature being below the glass transition temperature; (ii) conventional micrometer-sized particles (in the 30-90 μm range) made of agglomerated nanometer-sized particles; (iii) sub-micrometer- or nanometer-sized particles via a suspension in which also, instead of particles, stable sol of nanometer-sized particles can be introduced; and (iv) spray solutions of final material precursor. These different processes using plasma, HVOF or sometimes flame and also cold-gas spray will be discussed together with the production of nanometer-sized particles via the chemical reaction method or by a special type of milling: the cryogenic milling process often referred to as “cryomilling.”     

Al2O3-ZrO2 Finely Structured Multilayer Architectures from Suspension Plasma Spraying

Suspension plasma spraying (SPS) is an alternative to conventional atmospheric plasma spraying (APS) aiming at manufacturing thinner layers (i.e., 10-100 μm) due to the specific size of the feedstock particles, from a few tens of nanometers to a few micrometers. The staking of lamellae and particles, which present a diameter ranging from 0.1 to 2.0 μm and an average thickness from 20 to 300 nm, permits to manufacture finely structured layers. Moreover, it appears as a versatile process able to manufacture different coating architectures according to the operating parameters (suspension properties, injection configuration, plasma properties, spray distance, torch scan velocity, scanning step, etc.). However, the different parameters controlling the properties of the coating, and their interdependences, are not yet fully identified. Thus, the aim of this paper is, on the one hand, to better understand the influence of operating parameters on the coating manufacturing mechanisms (in particular, the plasma gas mixture effect) and, on the other hand, to produce Al₂O₃-ZrO₂ finely structured layers with large varieties of architectures. For this purpose, a simple theoretical model was used to describe the plasma torch operating conditions at the nozzle exit, based on experimental data (mass enthalpy, arc current intensity, thermophysical properties of plasma forming gases, etc.) and the influences of the spray parameters were determined by mean of the study of sizes and shapes of spray beads. The results enabled then to reach a better understanding of involved phenomena and their interactions on the final coating architectures permitting to manufacture several types of microstructures.     

Individual cell lag time distributions of Cronobacter (Enterobacter sakazakii) and impact of pooling samples on its detection in powdered infant formula

Cells of six strains of Cronobacter were subjected to dry stress and stored for 2.5 months at ambient temperature. The individual cell lag time distributions of recovered cells were characterized at 25 °C and 37 °C in non-selective broth. The individual cell lag times were deduced from the times taken by cultures from individual cells to reach an optical density threshold. In parallel, growth curves for each strain at high contamination levels were determined in the same growth conditions. In general, the extreme value type II distribution with a shape parameter fixed to 5 (EVIIb) was the most effective at describing the 12 observed distributions of individual cell lag times. Recently, a model for characterizing individual cell lag time distribution from population growth parameters was developed for other food-borne pathogenic bacteria such as Listeria monocytogenes. We confirmed this model’s applicability to Cronobacter by comparing the mean and the standard deviation of individual cell lag times to populational lag times observed with high initial concentration experiments. We also validated the model in realistic conditions by studying growth in powdered infant formula decimally diluted in Buffered Peptone Water, which represents the first enrichment step of the standard detection method for Cronobacter. Individual lag times and the pooling of samples significantly affect detection performances.     

Antifungal Activity of Lactic Acid Bacteria Isolated from Peanuts,Gari, and Orange Fruit Juice against Food Aflatoxigenic Molds

This study aims to evaluate the antifungal activity of lactic acid bacteria (LAB) from some Cameroonian food commodities against mycotoxigenic and spoilage molds. Following LAB isolation, the antifungal activity of the isolates was assessed. The organic acids were quantified using high-performance liquid chromatography and the ability of the LAB to reduce mold biomass and aflatoxin production was evaluated. The LAB were identified and the biopreservative potential of strain LO3 was evaluated on tomato paste. Nine percent of the strains isolated showed broad antifungal activity. The activity was due to the effect of organic acids comprising lactic, acetic, 4-hydroxy-3-phenyllactic and 3-phenyllactic acids. Lactobacillus plantarum LO3 exhibiting the highest and broadest antifungal activity was selected and showed the capacity to inhibit fungal growth and aflatoxin production in vitro. Moreover, this strain and its cell-free supernatant showed the ability to prevent aflatoxigenic mold growth in tomato paste without altering its physico-chemical and organoleptic properties.     

In vitro comparisons between Carica papaya and pancreatic lipases during test meal lipolysis: Potential use of CPL in enzyme replacement therapy

High levels of lipase activity are known to occur in Carica papaya latex, and this activity is being used in some biotechnological applications. The lipolytic activity of C. papaya lipase (CPL) on dietary triacylglycerols (TAG) has not yet been studied. Hence, the aim of this study was to characterise the specific activity of CPL on dietary TAG present in a crude preparation. Also, we have determined its stability during the lipolysis of a test meal at various pH values mimicking those occurring in the gastro-intestinal tract, with or without bile, and have compared these properties with those of porcine pancreatic extract (PPE) and human pancreatic lipase (HPL). CPL showed maximum stability at pH 6.0, both with and without bile. Some residual activity was still observed at pH 2 (20%), whereas the pancreatic lipases tested were immediately completely inactivated at this pH. In the absence of bile, the highest specific activities were measured at pH 6 in the case of CPL, PPE and HPL. Adding bile slightly decreased the CPL activity in the 4–6 pH range, thus shifting the optimum CPL activity to pH 7, where the presence of bile had no effect. Lipolysis levels decreased with the pH, but CPL was still more active than PPE at pH 5 on a relative basis. These results suggest that CPL might be a promising candidate for use as a therapeutic tool on patients with pancreatic exocrine insufficiency.