Dynamic deviation reduction‐based concurrent dual‐band digital predistortion

This article introduces the concurrent dual‐band digital predistortion (DPD) architecture with only one upconvertion unit, which is suitable for the linearization of wideband power amplifiers (PAs) excited by concurrent dual‐band signals. By extending the conventional dynamic deviation reduction (DDR) model to the concurrent dual‐band mode, we propose two DDR‐based concurrent dual‐band models, the dual‐band DDR (DB‐DDR) model and the simplified dual‐band DDR (SDB‐DDR) model. The performance of these two models is experimentally assessed with two types of wideband PAs (a GaN Class F PA and a GaN Doherty PA) driven by the concurrent dual‐band signal, and compared with the prior two‐dimensional digital predistortion (2D‐DPD) model and the two‐dimensional modified memory polynomial (2D‐MMP) model. The results prove the good DPD performance and low computational complexity of the proposed models. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:401–411, 2014.     

Oligomer and Polymer Formation in Hexamethylcyclotrisiloxane (D<Subscript>3</Subscript>) – Hydrosilane Systems Under Catalysis by tris(pentafluorophenyl)borane

Summary Reactions of hexamethylcyclotrisiloxane, D₃, with 1,1,3,3-tetramethyldisiloxane, ^HMM^H, 1,1,1,3,3-pentamethyldisiloxane, ^HMM, phenyldimethylsilane and phenylmethylsilane catalyzed by tris(pentafluorophenyl)borane were studied. These reactions lead to ring opening of D₃ by the SiH reactant producing open chain oligomers with hydrosilane functionality at one or both chain ends. The reactivity of the hydrosilanes toward D₃ decreases in the series: PhMeSiH₂ > ^HMM^H > PhMe₂SiH > ^HMM. Competitive self-oligomerization of ^HMM^H and ^HMM also occurs. Primary products of these processes are able to enter into reactions with the SiH and D₃ reactants; some also undergo cyclization. Thus, consecutive and competitive processes lead to a series of various oligohomologues. Gas chromatography in conjunction with chemical ionization mass spectroscopy permitted identification of structure and determination of the basic directions of these oligomerization processes. Polysiloxanes of higher molecular weight may be also formed in some of these systems. The reactions, which occur in the systems studied, are rationalized on the basis of the mechanism involving the hydride transfer from silicon to trivalent boron. This includes the transient formation of tertiary trisilyloxonium borate which decomposes by the hydride transfer to one of the silicon atoms of the trisilyloxonium center. Footnote: This paper is dedicated to Professor Ian Manners in recognition of his significant contributions to the field of organometallic polymers.     

Speech enhancement with an adaptive Wiener filter

This paper proposes an adaptive Wiener filtering method for speech enhancement. This method depends on the adaptation of the filter transfer function from sample to sample based on the speech signal statistics; the local mean and the local variance. It is implemented in the time domain rather than in the frequency domain to accommodate for the time-varying nature of the speech signals. The proposed method is compared to the traditional frequency-domain Wiener filtering, spectral subtraction and wavelet denoising methods using different speech quality metrics. The simulation results reveal the superiority of the proposed Wiener filtering method in the case of Additive White Gaussian Noise (AWGN) as well as colored noise.     

On the Gröbner basis triangularization of constraint equations in natural coordinates

Efficient dynamic simulation code is essential in many situations (including hardware-in-the-loop and model-predictive control applications), and highly beneficial in others (such as design optimization, sensitivity analysis, parameter identification, and controller tuning tasks). When the number of modeling coordinates n exceeds the degrees-of-freedom of the system f, as is often the case when closed kinematic chains are present, the governing dynamic equations consist of n second-order ordinary differential equations (ODEs) coupled with m=n?f algebraic constraint equations. This set of n+m index-3 differential-algebraic equations can be difficult to solve in an efficient yet accurate manner. Embedding (or generalized coordinate partitioning) can be used to obtain f ODEs (one for each independent acceleration), which are generally more amenable to numerical integration; however, the dependent positions are typically computed from the independent positions at each time step. Newton–Raphson iteration is often used for solving the position-level kinematics, but only provides solutions to within a specified tolerance, and can require several iterations to converge. In this work, Gröbner bases are used to obtain recursively solvable symbolic solutions for the dependent positions, which can then be evaluated to within machine precision using a fixed number of arithmetic operations. Natural coordinates are particularly attractive in this context, since the resulting constraint equations are maximally quadratic polynomials and are, therefore, easily triangularized. The proposed approach is suitable for use in an automated formulation procedure and, as demonstrated by three examples, is capable of generating highly efficient simulation code with minimal additional effort required at the formulation stage.     

丁腈胶乳的加氢反应

采用水合肼/过氧化氢氧化还原体系，以硼酸为催化剂，在常压下进行丁腈胶乳的氢化反应，研究了过氧化氢加入方式，硼酸和水合肼用量，反应温度及反应时间对丁腈胶乳加氢度的影响。结果表明，过氧化氢连续滴加再附加室温条件，氢化反应效果最好。当硼酸用量为2.64mmol，水合肼用量为95.2mmol，过氧化氮用量为79.3mmol。在60℃，6h下，丁腈胶乳的加氢度可达到90%以上。     

管材超声波分层缺陷检测中盲区的构成探析

管材超声波分层检测作为控制产品质量的关键步骤,必须引起相关从业人员的重视,特别是要重点分析分层缺陷检测中盲区的构成原因和分布特征。只有这样,才能切实保证检测结果的准确性,更好地控制管材质量。通过对超声波分层缺陷检测的重要性进行阐释,分析了其中盲区的构成和分布等问题。     

基于SkyEye的嵌入式Linux移植仿真技术研究

在嵌入式系统开发中,经常需要硬件开发板来调测软件,不仅操作繁琐,硬件环境不稳定时问题也很难定位;有时还会遇到软件等待硬件调试,延误开发周期的情况。在PC桌面系统下,探讨了一种基于SkyEye虚拟硬件技术的嵌入式平台仿真技术,介绍如何建立仿真基础环境,编译嵌入式Linux内核,制作根文件系统,编译、配置SkyEye,以S3C6410X为目标机处理器,将Linux内核及文件系统移植到基于SkyEye虚拟的ARM体系架构下,为嵌入式系统的研发探索了一种新的途径。     

一种电梯光幕保护系统的设计

介绍了光幕的组成和工作原理,剖析其优缺点。结合国标GB7588-2003对电梯门保护装置的要求,我们的光幕保护硬件系统是在电梯控制系统层面上设计的,而软件系统则最大限度地发挥光幕的优点,减少其缺点对电梯运行的影响。     

Matching ratio between positive and negative electrodes for double-layer capacitors

For double-layer capacitors in alkaline electrolyte, the specific capacitance of the positive electrode is not equal to that of the negative one. Thus, capacitor performance cannot be optimal with a positive/negative electrode matching ratio of 1. In this study nanoporous glassy carbons (NPGCs) were employed as the electrodes of capacitors, and the influence of matching ratio between positive and negative electrode on capacitor performance was systematically investigated. In aqueous KOH, the specific capacitance of the positive electrode is lower than that of the negative electrode. The matching ratio at which a maximum capacitance is obtained is dependent on the values of the positive and negative electrode capacitance. At low current rate, the highest specific capacitance is achieved at a matching ratio slightly higher than 1. At high current rate, a capacitor has the highest specific capacitance with the lowest resistance at a matching ratio of 1.5. This indicates that an optimum matching relationship between positive and negative electrodes is attained.     

Effects of reaction and cure temperatures on morphology and properties of poly(ester‐urethane)

Poly(ester‐urethane) was synthesized from poly(ethylene glycol adipate) (PEG) and 2,4‐toluene diisocyanate (TDI) to study the effects of reaction temperature and cure temperature on the crystallization behavior, morphology, and mechanical properties of the semicrystalline polyurethane (PU). PEG as soft segment was first reacted with TDI as hard segment at 90, 100, and 110°C, respectively, to obtain three kinds of PU prepolymers, coded as PEPU‐90, PEPU‐100, and PEPU‐110. Then the PU prepolymers were crosslinked by 1,1,1‐tris (hydroxylmethyl) propane (TMP) and were cured at 18, 25, 40, 60, and 80°C. Their structure and properties were characterized by attenuated total reflection Fourier transform infrared, wide‐angle X‐ray diffraction, scanning electron microscopy, dynamic mechanical analysis, and tensile testing. With an increase of the reaction temperature from 90 to 100°C, the crystallinity degree of soft segment decreased, but interaction between soft and hard segments enhanced, leading to the increase of the glass transition temperature (T_g) of soft domain and tensile strength. When the cure temperature was above 60°C, miscibility between soft and hard segments of the PEPU films was improved, resulting in relatively low crystallinity and elongation at break, but high soft segment T_g and tensile strength. On the whole, all of the PEPU‐90, PEPU‐100, and PEPU‐110 films cured above 60°C possessed higher tensile strength and elongation at break than that of the films cured at other temperatures. The results revealed that the reaction temperature and cure temperature play an important role in the improvement of the crosslinking structure and mechanical properties of the semicrystalline PU. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 708–714, 2006