Development and characterisation of nanowire-based FETs

Development of Si nanowire-based FETs, suitable for sensor applications is reported. Process sequences for SOI and bulk p-channel FinFETs are described. SEM observations of the fabricated devices (180 nm wide, 87 nm or 175 nm high) are presented and discussed. Electrical characteristics measurements and basic characterisation results obtained for these devices are described. A procedure for serial resistance extraction has been mentioned in more detail, due to its high value inherent in the process used. Several aspects of the device sensitivity to front- and back-gate control have been discussed from the point of view of its application in biochemical detectors.     

Salt Concentration Effects in Planar Light‐Emitting Electrochemical Cells

Incorporation of ions in the active layer of organic semiconductor devices may lead to attractive device properties like enhanced injection and improved carrier transport. In this paper, we investigate the effect of the salt concentration on the operation of light‐emitting electrochemical cells, using experiments and numerical calculations. The current density and light emission are shown to increase linearly with increasing ion concentration over a wide range of concentrations. The increasing current is accompanied by an ion redistribution, leading to a narrowing of the recombination zone. Hence, in absence of detrimental side reactions and doping‐related luminescence quenching, the ion concentration should be as high as possible.     

New Hormaphididae(Hemiptera,Aphidomorpha)from the Baltic Amber and its Palaeogeographic Significance

The present study describes a new genus and species Unicohormaphis sorini, which belongs to the subfamily Cerataphidinae. The contemporary distribution of aphids belonging to the Hormaphididae family is summarized and analyzed. According to the obtained data, the climate warming in Eocene was conducive to the expansion of the family over the areas of Europe. Subsequent climate changes, resulting from epeirogenic and orogenic movements towards the end of Eocene, led to a considerable cooling and drying of climate in the northern hemisphere. These processes contributed to the shrinking down of areas covered by subtropical forests, which constituted the habitat of Hormaphididae (Cerataphidinae). Retaining their way of life, the Cerataphidinae were forced to limit their distribution, and the representatives of the family in Europe became completely extinct.     

Investigations on printed elastic resistors containing carbon nanotubes

This paper presents the results of authors investigations on elaboration of a new thick film composition filled with carbon nanotubes (CNTs). The polymer composition consists of polymer vehicle, which is the solution of organic resin in certain combination of solvents, and functional phase—carbon nanotubes well dispersed in the vehicle. The pastes were applied with screen-printing on several substrates and temperature cured. The properties of obtained layers were characterized. Series of samples were prepared with different amount of CNTs to evaluate electrical properties. Changes in resistance were investigated during periodic mechanical and temperature stresses, realized through cyclical bending and rapid temperature change. Tensometric effect was also investigated. Investigations have proved that polymer composites based on carbon nanotubes exhibit high resilience to stress factors. Resistance change in function of temperature was also investigated to evaluate temperature coefficient of resistance (TCR). All this aspects are important for elastic resistors fabrication in printed electronics microcircuits. Resistance and noise measurements in cryostats have also been involved. 1/f type noise has been observed. Noise intensity, calculated in decade frequency bands, rises significantly with increasing temperature. Activation energies of thermally activated noise sources (TANS) have been revealed using low-frequency noise spectroscopy. Relatively large value of negative TCR has been obtained from resistance versus temperature curve. Calculated dimensionless sensitivity is similar to that observed in cryogenic temperature sensors. However, bulk noise intensity of resistive layer is larger than obtained for lead containing RuO₂ based resistive layers.     

Cold Model Investigations of Melting of Ice in a Gas-Stirred Vessel

The melting of steel scrap in high temperature liquid iron melt is investigated by conducting cold model experiments of the melting of ice sample of different geometries and sizes in an argon-stirred vessel containing water. The melting process of ice samples is observed using a high-speed camera. Design of experiments is based on similarity criteria. The relationships between non-dimensional groups related to heat transfer (Nu, Re, Pr, and Gr) are derived for different experimental conditions. The results are compared with those reported in the literature. The heat transfer coefficient is estimated as a function of mixing power and is found to be in good agreement with the calculated values obtained by using reported relationships in literature.     

Influence of Manganese and Nickel on the α´ Martensite Transformation Temperatures of High Alloyed Cr‐Mn‐Ni Steels

The martensite start temperature (M_s), the martensite austenite re‐transformation start temperature (A_s) and the re‐transformation finish temperature (A_f) of six high alloyed Cr‐Mn‐Ni steels with varying Ni and Mn contents in the wrought and as‐cast state were studied. The aim of this investigation is the development of the relationships between the M_s, A_s, A_f, T₀ temperatures and the chemical composition of a new type of Cr‐Mn‐Ni steels. The investigations show that the M_s, A_s and A_f temperatures decrease with increasing nickel and manganese contents. The A_f temperature depends on the amount of martensite. Regression equations for the transformation temperatures are given. The experimental results are based on dilatometer tests and microstructure investigations.     

Hydrogen Evolution on Binary and Ternary Cobalt Alloys Deposited With Superimposed Magnetic Field

The article presents results of electrodeposition of Co-Mo Co-Mo-C alloys in a magnetic field characterized by low overvoltage of hydrogen evolution.Addition of molybdenum and carbon was to lower the values of overvoltage of hydrogen evolution on cobalt.The influence of bath pH,bath composite,current density and magnetic field with different orientation on the deposits composition,structure and overpotential for hydrogen evolution reaction(HER)was determined.Electrocatalytic properties of the obtained alloy coatings within the range of hydrogen evolution were tested in a concentrated NaOH solution.The comparison of electrocatalytic properties of Co-Mo alloys with properties of Co-Mo-C ones enabled determining the influence of carbon presence in cathodic deposits on the overpotential values for hydrogen evolution.     

Effect of plasma treatment on the surface properties of polydimethylsiloxane

In this work, the analysis of the plasma modification of polydimethylsiloxane (PDMS) substrates was conducted. The influence of the modification onto the changes occurred within the geometrical structure and chemical composition of the surface was analyzed. Due to the study of the atomic force microscopy, it was possible to determine the relationships between the surface development and applied process parameters, defining the conditions facilitating to obtain isotropic or anisotropic orientations of wrinkles. A precise analysis of the chemical composition of the surface, executed before and after the modification processes, enabled to define the changes in their elementary composition. Moreover, the modification influence onto the changes of the contact angle and the surface free energy were also analyzed. So, based on the research it was stated that the increase of value of the surface free energy is proportional to the sp³ phase contents in the DLC coatings. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41635.     

Polymerization of β-butyrolactone initiated with Al(OiPr)3

Polymerization of β-butyrolactone has been studied in toluene with Al(OⁱPr)₃ as an initiator. The ring-opening polyaddition proceeds through a coordination–insertion mechanism at a very low rate. Well defined α-isopropylester, ω-hydroxy poly(β-butyrolactone)s (PBL) are formed with a narrow molecular weight distribution at low monomer-to-initiator molar ratios, When this ratio is higher (ca. 170), a competition occurs between propagation and side reactions, i.e. elimination, inter- and intra-molecular transesterifications and thermal degradation, which is responsible for a loss of control of the PBL molecular charcteristics. The addition of a Lewis base (1 equivalent of nicotine/Al) to the Al-alkoxide initiator has no significant effect on the polymerization rate, although the chain microstructure is deeply affected since predominantly syndiotactic PBL chains are formed (63% syndio-diads) in contrast to a completely atactic polymer in the absence of nicotine.     

Experimental verification of the kinetic model for the reaction yielding linear polyurethanes,claiming dependence of oligomer reactivities on molecular weights. III

Taking advantage of the algorithm developed earlier which makes it possible to calculate rate constants for the parallel-subsequent reactions of the kinetic model for the diisocyanate and diol polyaddition process, a mathematical model was developed for this process which then was subjected to mathematical decomposition. The procedure adopted allowed me to numerically resolve the obtained system of differential equations and to perform the numerical simulation of the polymerization process studied. For the reactions of 2,4-TDI and 1,4-butanediol, the results obtained were compared to experimental concentrations of urethane oligomer fractions found by means of GPC. It was found that the model suggested provides a better fit than does the model claiming dependence of chemical activity of oligomers solely on reactivity specifications for their functional groups. © 1996 John Wiley & Sons, Inc.