Linear phase FIR approximation of magnitude response |1/ω| for maximal flatness at an arbitrary frequency ω0, 0<ω0<π*

In many signal processing situations, the desired (ideal) magnitude response of the filter is a rational function: (a digital integrator). The requirements of a linear phase response and guaranteed stable performance limit the design to a finite impulse response (FIR) structure. In many applications we require the FIR filter to yield a highly accurate magnitude response for a narrow band of frequencies with maximal flatness at an arbitrary frequency ₀ in the spectrum (0, ). No techniques for meeting such requirements with respect to approximation of are known in the literature. This paper suggests a design by which the linear phase magnitude response can be approximated by an FIR configuration giving a maximally flat (in the Butterworth sense) response at an arbitrary frequency ₀, 0<₀<^*. A technique to compute exact weights for the design has also been given.     

Combined Optical and MR Bioimaging Using Rare Earth Ion Doped NaYF4 Nanocrystals

Here, novel nanoprobes for combined optical and magnetic resonance (MR) bioimaging are reported. Fluoride (NaYF₄) nanocrystals (20–30 nm size) co‐doped with the rare earth ions Gd³⁺ and Er³⁺/Yb³⁺/Eu³⁺ are synthesized and dispersed in water. An efficient up‐ and downconverted photoluminescence from the rare‐earth ions (Er³⁺ and Yb³⁺ or Eu³⁺) doped into fluoride nanomatrix allows optical imaging modality for the nanoprobes. Upconversion nanophosphors (UCNPs) show nearly quadratic dependence of the photoluminescence intensity on the excitation light power, confirming a two‐photon induced process and allowing two‐photon imaging with UCNPs with low power continuous wave laser diodes due to the sequential nature of the two‐photon process. Furthermore, both UCNPs and downconversion nanophosphors (DCNPs) are modified with biorecognition biomolecules such as anti‐claudin‐4 and anti‐mesothelin, and show in vitro targeted delivery to cancer cells using confocal microscopy. The possibility of using nanoprobes for optical imaging in vivo is also demonstrated. It is also shown that Gd³⁺ co‐doped within the nanophosphors imparts strong T1 (Spin‐lattice relaxation time) and T2 (spin‐spin relaxation time) for high contrast MR imaging. Thus, nanoprobes based on fluoride nanophosphors doped with rare earth ions are shown to provide the dual modality of optical and magnetic resonance imaging.     

Barrier coverage with wireless sensors

When a sensor network is deployed to detect objects penetrating a protected region, it is not necessary to have every point in the deployment region covered by a sensor. It is enough if the penetrating objects are detected at some point in their trajectory. If a sensor network guarantees that every penetrating object will be detected by at least k distinct sensors before it crosses the barrier of wireless sensors, we say the network provides k-barrier coverage. In this paper, we develop theoretical foundations for k-barrier coverage. We propose efficient algorithms using which one can quickly determine, after deploying the sensors, whether the deployment region is k-barrier covered. Next, we establish the optimal deployment pattern to achieve k-barrier coverage when deploying sensors deterministically. Finally, we consider barrier coverage with high probability when sensors are deployed randomly. The major challenge, when dealing with probabilistic barrier coverage, is to derive critical conditions using which one can compute the minimum number of sensors needed to ensure barrier coverage with high probability. Deriving critical conditions for k-barrier coverage is, however, still an open problem. We derive critical conditions for a weaker notion of barrier coverage, called weak k-barrier coverage.     

Moralism: mobility prediction with link stability based multicast routing protocol in MANETs

In recent research, link stability is getting tremendous attention in mobile adhoc networks (MANETs), because of several impediments that occur in a reliable and robust network. Link stability metric is used to improve network performance in terms of end-to-end delay, data success delivery ratio (DSDR) and available route time (ART). Energy consumption, bandwidth and communication delay of major concern in ad hoc networks. A high mobility of MANET nodes reduces the reliability of network communication. In a dynamic networks, high mobility of the nodes makes it very difficult to predict the dynamic routing topology and hence cause route/link failures. Multicast in MANETs is an emerging trend that effectively improves the performance while lowering the energy consumption and bandwidth usage. Multicast routing protocol transmits a packet to multicast a group at a given time instant to achieve a better utilization of resources. In this paper, node mobility is considered to map better their movement in the network. So, the links with long active duration time can be identified as a stable link for route construction. Variation in signal strength is used to identify whether the direction of the node is towards or away from estimating node. We consider signal strength as QoS metric to calculate link stability for route construction. Efforts are made to identify the link with highly probable longer lifetime as the best suitable link between two consecutive nodes. We predict the movement time of nodes that define the route path to the node destination. Exata/cyber simulator is used for network simulation. The simulation results of the proposed routing protocol are compared with on-demand multicast routing protocol and E-ODMRP, which works on minimum hop count path. Analysis of our simulation results has shown improvement of various routing performance metrics such as DSDR, ART, routing overhead and packet drop ratio.     

Ball Mill Synthesis of Bulk Quaternary Cu<Subscript>2</Subscript>ZnSnSe<Subscript>4</Subscript> and Thermoelectric Studies

In this work, quaternary chalcogenide Cu₂ZnSnSe₄ (CZTSe) was synthesized using a mechanochemical ball milling process and its thermoelectric properties were studied by electrical resistivity, Seebeck coefficient, and thermal conductivity measurements. The synthesis process comprises three steps viz., wet ball milling of the elemental precursors, vacuum annealing, and densification by hot pressing. The purpose of this is to evaluate the feasibility of introducing wet milling in place of vacuum melting in solid state synthesis for the reaction of starting elements. We report the structural characterization and thermoelectric studies conducted on samples that were milled at 300 rpm and 500 rpm. X-ray diffraction (XRD) analysis showed the existence of multiple phases in the as-milled samples, indicating the requirement for heat treatment. Therefore, the ball milled powders were cold pressed and vacuum annealed to eliminate the secondary phases. Annealed samples were hot pressed and made into dense pellets for further investigations. In addition to XRD, energy dispersive spectroscopy (EDS) studies were performed on hot pressed samples to study the composition. XRD and EDS studies confirm CZTSe phase formation along with ZnSe secondary phase. Electrical resistivity and Seebeck coefficient measurements were done on the hot pressed samples in the temperature range 340–670 K to understand the thermoelectric behaviour. Thermal conductivity was calculated from the specific heat capacity and thermal diffusivity values. The thermoelectric figure of merit zT values for samples milled at 300 rpm and 500 rpm are ～0.15 and ～0.16, respectively, at 630 K, which is in good agreement with the values reported for solid state synthesized compounds.     

Minimized SER and QOS Based Power Allocation Strategies for Multi HDAF Relay Cooperative Network

In this paper, a multi hybrid decode-amplify-forward relay cooperative network with perfect CSI in flat Rayleigh fading channel is considered. Using moment generating function based approach, the closed form of symbol error rate (SER) with asymptotic approximation is derived. Based on the lower bound of SER (Olfat and Olfat in IET Commun 5(4):2018–2027, 2011), Lagrange multiplier method and differential evolution (DE) algorithm based power allocation schemes are proposed. With fixed source power, the relay powers are optimized with the proposed schemes by the power allocation factor. Further the SER performance of proposed power allocation schemes is investigated by varying the location of the relays. The performance gain of proposed power allocation schemes depends on the channel quality of source to relay and relay to destination links. It is observed that the proposed power allocation schemes outperform the equal power allocation scheme and DE based power allocation provides SER response close to power allocation with Lagrange multiplier method. In order to achieve the target SER (quality of service) minimum power allocation is introduced as minimum relay power allocation and minimum source and relay power allocation.

     

Ultrathin Highly Luminescent Two‐Monolayer Colloidal CdSe Nanoplatelets

Surface effects in atomically flat colloidal CdSe nanoplatelets (NLPs) are significantly and increasingly important with their thickness being reduced to subnanometer level, generating strong surface related deep trap photoluminescence emission alongside the bandedge emission. Herein, colloidal synthesis of highly luminescent two‐monolayer (2ML) CdSe NPLs and a systematic investigation of carrier dynamics in these NPLs exhibiting broad photoluminescence emission covering the visible region with quantum yields reaching 90% in solution and 85% in a polymer matrix is shown. The astonishingly efficient Stokes‐shifted broadband photoluminescence (PL) emission with a lifetime of ≈100 ns and the extremely short PL lifetime of around 0.16 ns at the bandedge signify the participation of radiative midgap surface centers in the recombination process associated with the underpassivated Se sites. Also, a proof‐of‐concept hybrid LED employing 2ML CdSe NPLs is developed as color converters, which exhibits luminous efficacy reaching 300 lm W_opt^?1. The intrinsic absorption of the 2ML CdSe NPLs (≈2.15 × 10⁶ cm^?1) reported in this study is significantly larger than that of CdSe quantum dots (≈2.8 × 10⁵ cm^?1) at their first exciton signifying the presence of giant oscillator strength and hence making them favorable candidates for next‐generation light‐emitting and light‐harvesting applications.     

Body Bias Voltage Computations for Process and Temperature Compensation

With continued scaling into the sub-90-nm regime, the role of process, voltage, and temperature (PVT) variations on the performance of VLSI circuits has become extremely important. These variations can cause the delay and the leakage of the chip to vary significantly from their expected values, thereby affecting the yield. Circuit designers have proposed the use of threshold voltage modulation techniques to pull back the chip to the nominal operational region. One such scheme, known as adaptive body bias (ABB), has become extremely effective in ensuring optimal performance or leakage savings. Our work provides a means to efficiently compute the body bias voltages required for ensuring high performance operation in gigascale systems. We provide a computer-aided design (CAD) perspective for determining the exact amount of bias voltages that can compensate both temperature and process variations. Mathematical models for delay and leakage based on minimal tester measurements are built, and a nonlinear optimization problem is formulated to ensure highest frequency operation under all conditions, and thereby minimize the overall circuit leakage. Three different algorithms are presented and their accuracies and runtimes are compared. The algorithms have been applied to a wide range of process and temperature corners, for a 65- and 45-nm technology node-based process. A suitable implementation mechanism has also been outlined.     

High-performance fully depleted silicon nanowire (diameter /spl les/ 5 nm) gate-all-around CMOS devices

This paper demonstrates gate-all-around (GAA) n- and p-FETs on a silicon-on-insulator with /spl les/ 5-nm-diameter laterally formed Si nanowire channel. Alternating phase shift mask lithography and self-limiting oxidation techniques were utilized to form 140- to 1000-nm-long nanowires, followed by FET fabrication. The devices exhibit excellent electrostatic control, e.g., near ideal subthreshold slope (/spl sim/ 63 mV/dec), low drain-induced barrier lowering (/spl sim/ 10 mV/V), and with I/sub ON//I/sub OFF/ ratio of /spl sim/10/sup 6/. High drive currents of /spl sim/ 1.5 and /spl sim/1.0 mA//spl mu/m were achieved for 180-nm-long nand p-FETs, respectively. It is verified that the threshold voltage of GAA FETs is independent of substrate bias due to the complete electrostatic shielding of the channel body.     

A new grounded lamination gate (GLG) for diminished fringe-capacitance effects in high-/spl kappa/ gate-dielectric MOSFETs

A grounded lamination gate (GLG) structure for high-/spl kappa/ gate-dielectric MOSFETs is proposed, with grounded metal plates in the spacer oxide region. Two-dimensional device simulations performed on the new structure demonstrate a significant improvement with respect to the threshold voltage roll-off with increasing gate-dielectric constant (due to parasitic internal fringe capacitance), keeping the equivalent oxide thickness same. A simple fabrication procedure for the GLG MOSFET is also presented.