Contribution of listeners' approaching motion to auditory distance perception.

Of the several sources of acoustic information for distance perception, those arising from motion of the listener or sound source have received little attention. This motion-related information (recently called acoustic tau) is described, and experiments evaluating its utilization are presented. Accuracy and consistency at walking to the locations of briefly presented sounds were better when people listened while walking than while standing still. Manipulations of the sound to simulate shorter or longer target distances produced appropriate undershooting but not overshooting. The results indicate that people use motion-related acoustic information about distance to guide their locomotor actions, although they do not take full advantage of this information. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Growth rate and surface microstructure in α(6H)–SiC thin films grown by chemical vapor deposition

Monocrystalline 6H-SiC thin films have been epitaxially grown on off-axis 6H-SiC {0001} substrates in the temperature range of 1623–1873 K via chemical vapor deposition. The growth rate was a strong function of the growth temperature and the reactant gas concentration. The activation energies for growth were 64 kJ/mole and 55 kJ/mole for the (0001) Si face and the (0001) C face, respectively. The concentration of growth pits in the films increased as a function of decreasing deposition temperature, increasing concentration of reactant gases and increasing off-axis orientation. Beta-SiC islands were also observed in the epilayers when the (SiH₄ + C₂H₄)/H₂ ratio was ≥2.5:3000.     

Temperature, thermal efficiency, and gradient performance from two seawater-SZ solar ponds

This paper presents 10 months of experience with two seawater-SZ (Storage Zone) solar ponds operated as a source of warm seawater which could have been used in an adjacent mariculture facility. Observations and extensive temperature, gradient and efficiency data are presented. This work demonstrated operation of and heat extraction from seawater-SZ solar ponds over a much longer interval than in previous work. It confirmed that seawater-SZ solar ponds can consistently give useful temperature elevations. A few phenomena not characteristic of conventional solar ponds were identified and are discussed.     

Sensitization of the acoustic startle reflex by footshock.

Administration of footshock (500-ms duration, 0.2–2.4 mA) increased the amplitude of the startle reflex for a long time after its presentation. The effect occurred with a single footshock, although its magnitude and consistency across animals were greater with 5 or 10 footshocks presented 1/s. The facilitatory effect came on within 2–4 min with a 0.6-mA shock, peaking in about 10 min and then dissipating over the next 40 min. Stronger shocks also increased startle, but with a more delayed onset of facilitation (8–20 min). Footshocks increased startle in rats not previously given startle-eliciting stimuli, indicating sensitization rather than dishabituation. The facilitatory effect may not be attributable to a rapid conditioning to the experimental context, because a change in lighting conditions from shock presentation to testing did not attenuate shock sensitization. This excitatory effect of shock on startle may represent the unconditioned effect of shock that can become associated with a neutral stimulus to support classical fear conditioning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Loss characteristics of high-/spl epsiv//sub r/ microstrip lines fabricated by an etchable thick-film on ceramic MCM technology

Etchable thick-film multi-chip-module (MCM) technology has led to the possibility of fabricating microwave integrated circuits (MICs) with performance similar to MICs produced using more expensive conventional thin-film MCM-D techniques. However, little data is available on the loss characteristics of the technology at microwave frequencies. This paper describes an experimental investigation into the loss properties of high-definition etchable thick-film MCM microstrip lines formed on a variety of high dielectric constant (high-/spl epsiv//sub r/) ceramic substrates. Substrates investigated comprise 96% alumina (/spl epsiv//sub r/=9.5), (Zr,Sn)TiO/sub 4/(/spl epsiv//sub r/=36.6) and BaO-PbO-Nd/sub 2/O/sub 3/-TiO/sub 2/ (/spl epsiv//sub r/=90.9). Microstrip loss properties are determined by fabricating a series of loosely coupled half-wave resonators on each substrate, with a range of characteristic impedance values. Measurements to 6 GHz are compared to those for similar lines fabricated using conventional thin-film MCM-D technology. The results demonstrate that etchable thick-film MCM technology provides many of the advantages of thin-film MCM-D technology, such as low-loss and high-definition conductors, and is suitable for the cost-effective fabrication of miniaturised high-performance microstrip MICs in high volume.     

The economics of energy efficiency for the poor—a South African case study

South Africa’s Reconstruction and Development Programme set ambitious goals for providing basic services to all, including housing and electrification. More efficient use of energy has the potential to socially and politically support these goals, particularly when it is targeted at low-income communities lacking adequate energy services. This paper examines the economics of energy efficiency for the urban poor from the perspective of society, utilities and poor consumers, using five example programmes. While the five energy efficiency programmes generally have significant economic and environmental benefits from a social perspective, they may not be as attractive to utilities and consumers. Also examined are the policy options for overcoming the significant barriers to energy efficiency, and ways government can bridge the gap between what is good for society and what is good for the electricity industry.     

Individual differences in extended practice functions and solution strategies for basic addition facts.

Practice on addition basic facts and changes in solution strategies were examined in 3rd- and 4th-grade students, practicing over 3 months. Response latencies decreased, indicating positive practice effects. Each of 3 student groups demonstrated different solution–strategy mixtures. Different mixtures led to different practice effects, indexed by shifts to more efficient counting strategies and more direct retrieval. Expectations about effects of practice and instructional strategies for optimizing practice must be sensitive to a child's actual strategy pattern. Most students had decreasing latency practice functions. However, quantitative functions fit to the practice session data indicated a high proportion of cases where the latency pattern over sessions was nonmonotonic. Trends over a small number of practice sessions may be inadequate for decisions about the utility of further practice, because such data may poorly represent long-term, cumulative effects on modifying strategy usage. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

High-power etched-facet lasers

We demonstrate, for the first time, laser diodes with anetched facet fabricated by chemically assisted ion beametching, producing 1?7 W pulsed and 470mW CW output power from one facet. The devices were coated and bonded junction-side-up and tested at room temperature. The single 40 ?m stripe, 300 ?m-long devices exhibit 94 mA threshold current and differential quantum efficiencies of 80% pulsed (78% CW).